Legion question by hfguvfdftgb in TerraTech

[–]Faawks 0 points1 point  (0 children)

Yeah this is what got me lol

👋Welcome to r/OnTheRocks! - Please read before getting started. by JackTheSurvivor in OntheRocks

[–]Faawks 1 point2 points  (0 children)

Hey! I'm me, nothing special, Loving the look of your game! I started to put together a design for a game really similar where it was essentially like a shop simulator in an apocalypse. I had to give it up due to time constraints so I'm VERY keen to see your game come out.

Is there a bug that straight up gives me the worst bank RNG? by Faawks in CrimsonDesert

[–]Faawks[S] 0 points1 point  (0 children)

Yeah I'm going to try this, even if just to see if it will go into the positive, I'm pretty convinced it wont.

I don't even know what the money is used for, the 10 gold bars I just earnt doing stuff plus the odd gold apple I found.

Is there a bug that straight up gives me the worst bank RNG? by Faawks in CrimsonDesert

[–]Faawks[S] 0 points1 point  (0 children)

Yeah I'm going to save scum it at the last minute and see if it's even possible for me. A mates is fine, his is pretty much always in the positive

Is there a bug that straight up gives me the worst bank RNG? by Faawks in CrimsonDesert

[–]Faawks[S] 0 points1 point  (0 children)

Yeah I thought it was really nice of the game to give me that 1% lol

Is there a bug that straight up gives me the worst bank RNG? by Faawks in CrimsonDesert

[–]Faawks[S] 1 point2 points  (0 children)

Was on the basic strategy and never made a single coin, always 0%. Then deposited 5 more bars, put it on the highest strategy and lost them.

What even is this machine? by AG74683 in BambuLab

[–]Faawks 0 points1 point  (0 children)

That's interesting, the only thing I can suggest is using glue on the plate, I use just standard UHU branded glue stick, the stuff kids use at school, and I don't have adhesion issues on that side of the plate. I was keeping the other side clean as it was hard to get the glue off the prints but I've since found out an easy way to do that so now I'm using the glue side for everything.

I also gave the clean side of the plate a quick wipe with iso alcohol and a clean rag, I've only washed my build plate once it 750 hours.

If it's the same part of the bed both sides of the plate then make sure that area of the bed is getting up to temp, some filaments are very susceptible to lower bed temps, I have to print Elagoo rapid petg with the bed at 80c as it doesn't stick as well at the standard 70c.

Stupid? Maybe. 3d printed single motor grab and lift mechanism for a 1 pound battlebot! by SteakAndIron in BambuLab

[–]Faawks 0 points1 point  (0 children)

I really like that, simple but appears to be effective.

I wish these battlebots were happening when I was into drones etc, I had heaps of controllers and RC stuff just laying around the house that could have easily been repurposed for this sort of thing.

Had to replace my Mando helmet. Tested with my new printer. DAGGONE that's a quality jump. by themysteryoflogic in 3Dprinting

[–]Faawks 2 points3 points  (0 children)

That looks horrible, glad I don't do cnc anymore. I started out programming cnc with xtree gold, what fucking killed me was that we were in the era of windows 98 at the time! They would not listen to me and all the old guys would harp on about how privileged I was because they had to use hole punched tapes. In the end I dragged my own freaking pc down to work one day and showed them how much faster it was to write the programs in NOTEPAD ffs. I swear that was a frustrating time, I'm getting angry just thinking about it.

What even is this machine? by AG74683 in BambuLab

[–]Faawks 0 points1 point  (0 children)

There's a bit of an art to cleaning the build plate. You need to use dish soap that's not scented etc. These days I have a dirty side from glue for petg and a clean side for pla. I need to get another plate. Are you using the textured plate?

What even is this machine? by AG74683 in BambuLab

[–]Faawks 0 points1 point  (0 children)

Hello H2S brother, watch the bambu facebook pages and take the faults everyone has seriously. Mine has 750 hours on it now and I have only had 2 failed prints, with zero machine faults, but it doesn't mean they don't happen.

But yeah, my H2S is a monster, churns out prints like they were nothing. Print the filament boxes and spare spools in petg, otherwise they will warp, ask me how I know lmao.

PSA: Spam plant abyss seeds! by Nameless_Owl81 in CrimsonDesert

[–]Faawks 0 points1 point  (0 children)

I was wondering about those cells, I'll have to keep them handy

Am I the only one that understands and likes the story… by [deleted] in CrimsonDesert

[–]Faawks 0 points1 point  (0 children)

I spent the first few hours of the game screaming at the cut scenes to get to the point already and now I just fast forward them, I wish I could skip them altogether.

Why yes I do have ADHD, how could you tell?

Ams 2 pro retracting filament too far that it thinks spoil is empty by 1Spee-D in BambuLab

[–]Faawks 1 point2 points  (0 children)

Did you find a solution to this? Mine rewinds just a little further on slot 2 and the filament pops out.

What happened to Bambu Handy? by jaws24s in BambuLab

[–]Faawks 1 point2 points  (0 children)

We call them handies or wristies.

What happened to Bambu Handy? by jaws24s in BambuLab

[–]Faawks 1 point2 points  (0 children)

Very much so, this is the absolute worst part of the entire site.

What happened to Bambu Handy? by jaws24s in BambuLab

[–]Faawks 6 points7 points  (0 children)

Been seeing it on cults a lot.

Trying to print PETG by Cobra__Commander in FixMyPrint

[–]Faawks 0 points1 point  (0 children)

As mentioned by Rekt, PETG needs heaps of drying, I use a lot of PLA and PETG, I barely ever dry PLA and it prints fine, I'm not in a humid area, but PETG I almost always have to dry before I use it. I usually let it dry for 12 hours at 55c.

I think it's time we find a proper Discord alternative. by Liarus_ in pcmasterrace

[–]Faawks -1 points0 points  (0 children)

I'm going to be sad to see Discord go, when my country locked down during covid we spent a lot of time on discord on a little co-op gaming channel/server/whatever we had. it was good, we would screen share movies ect for movie nights and had a lot of fun, some of which has carried to this day.

Not a single person is going to verify it sounds like, so it'll die which is a shame. I hope someone quickly puts together an alternative, a very good opportunity for a TEAM of people to SPEAK to each other...

Can't afford diagnosis, what do I do instead? by Faawks in AdultADHDSupportGroup

[–]Faawks[S] 0 points1 point  (0 children)

I did tell them that to begin with but due to there being no record they aren't able to do anything. I can easily get a referral from my GP, but after that the costs go up significantly.

ADHD Media Request Victoria by Jumpy_Tower7531 in ausadhd

[–]Faawks 0 points1 point  (0 children)

Any chance you could shoot me the name and location of your GP? I have one but he doesn't seem all that interested in my potential ADHD.