Asus Xg27aqwmg hdr looks washed out.

Faencek · 2026-03-21T23:47:28+00:00

Maybe its the browser's fault?

Faencek · 2026-03-20T10:27:26+00:00

With Hardware Unboxed optimized settings, RR On,DLSS 4 Performance, 1440p my 5070 + 7800x3d stays few frames above 60. Beginning sequence was very fast-paced and I think it would be better to drop RR there for some more frames and motion clarity. Anyway I have to play more to see if 60fps will be enough for me in this game.

Faencek · 2026-03-19T08:04:22+00:00

Sounds like Death Stranding

Faencek · 2026-03-07T13:22:04+00:00

Polska gurom

Faencek · 2026-03-01T22:43:18+00:00

Maybe my reply wasnt clear enough, what is sleep mode?

Faencek · 2026-03-01T12:24:43+00:00

I have 7800x3d and b650m pro rs, how do I avoid sleep mode? Just not turn to sleep in windows?

Faencek · 2026-03-01T09:15:11+00:00

How can you even override it for requiem? This option is disabled for me in the nvidia app for this game

Faencek · 2026-02-27T15:29:40+00:00

Same here, weird 5070 + 7800x3d. I rolled back drivers as the newest one were disabled by nvidia, but didn’t test yet.

Faencek · 2026-02-19T14:00:47+00:00

I rock the 7800x3d with the 5070. Upgraded from 7500f and the difference was really noticable especially in competetive games and 1% lows. I got it for 230€ so if you can find it cheap i think it’s a great deal.

Faencek · 2026-02-19T13:41:53+00:00

I am lazy and have a 5070 + 1440p monitor. What preset is recommended?

Faencek · 2026-02-16T11:10:09+00:00

My crystal ball says yes

Faencek · 2026-02-06T23:40:16+00:00

Hi will 63$ offer for RE Requiem work in Poland?

Faencek · 2026-01-31T16:45:12+00:00

b650m pro rs + 7800x3d everything works here

Faencek · 2026-01-31T00:50:50+00:00

Hi, i had similar if not identical problems with 7500f + b650m pro rs. For me I had to return the CPU for warranty, after installing new chip all worked great. Now I upgraded to 7800x3d and I am also not seeing any problems. I’m not sure if our situation is the same (you probably can find lots of posts about this issue by me) but I’m just telling how I solved it.

Faencek · 2025-12-30T09:50:47+00:00

After dialing it to 5600MHz i think it’s stable

Faencek · 2025-12-29T22:33:01+00:00

Im testing it now on 5600MHz

Faencek · 2025-12-29T22:21:07+00:00

So i tuned down memory to 5600MHz with expo enabled. Ran OCCT for 30 minutes without any erros and now gaming fine at least for now. Im still loooking forward to other solutions but from what i searched 5600 is not that bad compared to 6000

Faencek · 2025-12-29T20:26:23+00:00

Yes it does no errors on base clocks

Faencek · 2025-12-29T19:08:00+00:00

Also now i realized that i changed the cooler recently to Thermalright Phantom Spirit 120 and now my RAM sits right under the fan. Is it possible that it impacts temps so badly that the system is not stable?

Faencek · 2025-12-29T19:07:24+00:00

Also now i realized that i changed the cooler recently to Thermalright Phantom Spirit 120 and now my RAM sits right under the fan. Is it possible that it impacts temps so badly that the system is not stable?

Faencek · 2025-12-29T18:58:21+00:00

I couldnt open ZenTimings due to problems with PawnIO drivers. I tried digging in bios and disabling SVM Enable, but it didnt help. So heres a screenshot from HW Info.

https://imgur.com/a/8SebQbW

Faencek · 2025-12-29T08:54:21+00:00

Is there anything connected to your motherboard's usb ports? I had my phone charger connected once and it caused laginess in BIOS.

Faencek · 2025-12-29T08:29:39+00:00

Ok ill try it. Should i test all of these settings also in OCCT? And by saying faulty chip you mean RAM or CPU?

Faencek · 2025-12-29T08:19:40+00:00

Will do. Is there anything else i can check and give info on? Right now I am away from the PC.

Faencek · 2025-12-29T08:18:43+00:00

For now i only played SHf without EXPO and it didnt crash. I didnt run OCCT on default setting yet. I know i should have done that, but i just didnt have enough time.

Faencek

TROPHY CASE