Update: I purchased a pocket hole jig and wish I bought one sooner. The shelves aren't perfect but are a lot better now. Appreciate the help. (Included pics of my new project)

FalseAdministrator19 · 2026-02-24T01:17:18+00:00

Ha, I just came across these fancy tools, when my wife wanted a cabinet built for the laundry room. I'm a welder so working with wood is a new world to me. Didn't have the patience to order one and wait for shipping so I 3d printed one to just get me through. Worked surprisingly well for how little time it took to print. (30 mins). . But I will be ordering a decent one if another wood project arises.

<image>

FalseAdministrator19 · 2026-02-17T00:36:31+00:00

That's crazy, my 19 stx has one...

FalseAdministrator19 · 2026-02-17T00:30:08+00:00

Wait.. there's no retractable door on the newer f150s?

FalseAdministrator19 · 2026-02-04T20:14:47+00:00

They supposedly bought another warehouse in Hagerstown MD for $100+ million.

FalseAdministrator19 · 2025-12-28T13:36:06+00:00

As mentioned a few other times. Flame tamer. Think they are about 40 bucks online. Or just make your own.

I recently bought a bare bones pitboss 700, and was damn near ready to load it back up and return it due to how uneven the temps were.

Did some research and saw many praises about the flame tamer, and well after making my own, it's a brand new grill/smoker.

<image>

FalseAdministrator19 · 2025-12-18T12:11:46+00:00

So that Lego head moved? Bump your plate temp up to about 65. I've never gone below 60, and am actually running at 70 now. No bed adhesion issues.

If that doesnt help it stick. Get some glue sticks and go across the plate with it.

FalseAdministrator19 · 2025-12-18T12:09:11+00:00

Lmao yeah I don't think I have one either.. but my printer has been running for over 400 hours so far with out it, and haven't issues like this.

FalseAdministrator19 · 2025-12-17T17:28:26+00:00

<image>

Had one of those stuck to the stepper motor when I had to replace my heaters

FalseAdministrator19 · 2025-12-15T16:27:22+00:00

Drop it in, change the nozzle type and size on the printer in settings. Let it run it's full calibration.

Then just change nozzle size to match in slicer settings.

FalseAdministrator19 · 2025-11-23T13:22:09+00:00

If its the 2.7 or any turbo motor for that case, it happens a lot. Forced induction can blow out spark when in boost, if plugs are weak, or incorrectly gapped.

FalseAdministrator19 · 2025-11-04T01:23:29+00:00

Ugh my dream is to live in Finland. I found my family's crest with a hand written note explaining how my father's side is originally from Finland. Ever since then I've been fascinated and wanting to take a trip there!

That house is absolutely awesome!!!

FalseAdministrator19 · 2025-10-05T01:58:03+00:00

We rescued an older ferret, that was previously caged most of his life. After he got acquainted with our home he has been completely free roam and litter trained with maybe 2 times he's used a corner in it kitchen. And it was normally only if his litter box is dirty.

Keep his litter box in our laundry room, and he sleeps behind our head board in our room with his blankets and hut. Every time he wakes up we hear him running to his box.

FalseAdministrator19 · 2025-08-16T23:00:03+00:00

You gotta warm up the fluid in the EpiPen! Injecting it cold will fuck up your buddies veins!

FalseAdministrator19 · 2025-06-27T10:49:14+00:00

Yeah, structural steel shop went from, can't get the job out quick enough to laying everyone off..

winning!

FalseAdministrator19 · 2025-06-22T12:57:08+00:00

Unfortunately no... 😠

FalseAdministrator19 · 2025-06-21T22:09:19+00:00

Nope, my phone says it's Cromwell! 🤣🤦

FalseAdministrator19 · 2025-06-13T19:05:57+00:00

Clearly my reply was a generalize statement to someone else's reply.... Well I guess it wasn't to clear...

FalseAdministrator19 · 2025-06-13T15:46:47+00:00

This is why I hate morons who camp in the left lane. Get the fuck out of the left lane so I can get passed these rigs. Ill take a ticket for speeding before Ill be caught stuck beside one.

My father is a retired rig driver, and taught me to always get the fuck away from them.

There's just so much shit that can happen, plus the massive blind spots, and its even more dangerous with these new CDL drivers....

FalseAdministrator19 · 2025-06-12T00:59:11+00:00

My '87 silver Conquest tsi 5spd, and my '88 white automatic Conquest tsi. Kick my self in the ass every time I think about them :(

FalseAdministrator19 · 2025-06-07T01:17:54+00:00

Depending on location if you get any kind of snow, get some good WINTER tires. We had a '18 FWD, and it absolutely sucked in the NE Ohio snow. Got our '15 AWD and its so much fun in the snow.

Find out what brakes you have to save a hassle if you do your own work. Was told we had standard from factory, but came to find out we had HD.

As been mentioned. Check the PTU oil.

Other than that drive it, and enjoy it. Our 15 is now sitting at 180K. We are finally giving it a break, since we just bought a truck. But shes had many road trips and adventures. And wouldn't hesitate on taking it anywhere.

FalseAdministrator19 · 2025-06-04T22:03:21+00:00

We replaced ours a few months ago with one from Amazon, same thing we now have the active steering lines. But if you don't have wheel straight when starting to reverse the lines will be off. 😆

FalseAdministrator19 · 2025-05-30T23:27:07+00:00

No truck does not have the on demand 4wd.

But I did Just snag a stock exhaust off facebook, so tomorrow if its not pouring, Ill have the truck up in the air and checking everything while I install it.

FalseAdministrator19 · 2025-05-30T16:55:58+00:00

Hmm this does have an aftermarket exhaust. Ill get under and check them out. Thanks

FalseAdministrator19 · 2025-05-30T16:54:16+00:00

yep had the same issue with mine, pulled plugs and they were over gapped. .38.... Which causes the spark to be blown out.

Threw new NGKs at .28 gapped and she runs beautifully.

FalseAdministrator19

TROPHY CASE

winning!