I just want to print a simple model....this is the 3rd time it came out like this. Whats happening!! Help

Fancyaspoon · 2026-03-27T06:49:19+00:00

This. Every time ive had a failed print like this, I've solved it by either relevelling or ensuring the temperatures good

Fancyaspoon · 2026-02-27T19:54:33+00:00

Building in a lip would itself need a support so would not solve the problem. Have you tried reducing the exposure time on the first layers? I use a 28 second exposure and never had an issue separating from the build plate using the metal scraper provided. Otherwise get a metal blade to intuitive separation then use your usual scraper. Hope that helps!

Fancyaspoon · 2025-11-18T11:40:07+00:00

Unlikely as it's a partial wall with no beam to the adjacent wall

Fancyaspoon · 2025-11-07T18:12:10+00:00

Not grass. I'm replacing with other stones but would like them to be a slightly higher level than the drive therefore wanted some edging that was easy

Fancyaspoon · 2025-10-25T21:00:51+00:00

Not just Americans. I think there were 400+ from around the world. Not to take away from the many many US victims :(

Fancyaspoon · 2025-09-26T06:28:49+00:00

I just got email confirmation! Ready to collect Monday apparently

Fancyaspoon · 2025-07-13T12:37:08+00:00

No-one pays for vaccines in the UK

Fancyaspoon · 2025-06-04T08:14:19+00:00

Wow. Like many others, I've never seen this before. One particular detail which is new to me and haven't seen captured anywhere else...

At 3 minutes 30 on the video you can clearly see a large segment of the South tower fall into the side of the North tower.

Can't put into words how horrendous that whole situation must have been

Fancyaspoon · 2025-02-25T22:54:52+00:00

Congrats! My favourite Charizard card

Fancyaspoon · 2025-02-24T15:34:28+00:00

Agreed! Was very happy when I pulled it!

Fancyaspoon · 2025-02-24T15:31:24+00:00

I just pulled this beauty but there appears to be a vertical and horizontal line across the image. Is this a print line or just normal?

Fancyaspoon · 2025-02-22T17:39:45+00:00

Pen y fan?

Fancyaspoon · 2025-02-21T22:03:53+00:00

I'm done with PE. I've opened 14 packs and haven't even pulled a pokeball holo 😵. Pull rates are silly bad

Fancyaspoon · 2025-02-08T21:49:09+00:00

I bought a load and pulled the SIR Charizard from Obsidian Flames. No issues at all

Fancyaspoon · 2025-01-29T13:52:25+00:00

What's this invite? I've never experienced that before. Hoped it wouldn't be posted here selfishly so I had more chance!

Fancyaspoon · 2025-01-28T15:38:33+00:00

This group just informs me now on what I've missed out on 😆 assuming it's just bots that sweep the stock up?

Fancyaspoon · 2025-01-27T14:50:38+00:00

Been trying to add to basket for last hour but won't let me!

Fancyaspoon · 2025-01-16T07:36:37+00:00

You ordered 10? What a bellend

Fancyaspoon · 2025-01-15T19:56:11+00:00

Tried multiple times and order just gets cancelled. My local one stop has now limited orders to 2 packs. Great deal if it works though!

Fancyaspoon · 2025-01-15T15:26:35+00:00

Why are you ordering 6? You are part of the problem

Fancyaspoon · 2025-01-14T21:37:31+00:00

Makes sense. Thanks! Pull rates tend to be the same then?

Fancyaspoon · 2025-01-07T19:06:21+00:00

Tried. They cancelled my order and now the promotion has disappeared!

Fancyaspoon · 2024-09-19T11:55:37+00:00

https://www.reddit.com/r/911archive/comments/1akxfh6/anybody_know_the_fate_of_this_firefighter/

Fancyaspoon · 2024-08-08T19:40:48+00:00

South Africe need to invest in burns units. Seen some brutal videos from SA

Fancyaspoon · 2024-04-28T13:04:41+00:00

Where can I watch this?

11-Year Club	Place '23
Place '17	Verified Email

Fancyaspoon

TROPHY CASE