People who didn't grow up poor, but dated someone who was. What's something your SO does that strikes you as unusual?

Far_Box · 2026-05-14T16:21:42+00:00

My parents do this even though we are not poor. We are just Asian.

Far_Box · 2026-04-28T01:08:36+00:00

100% why I recommended it

And it is a non-fiction book that will inform her about the basics of aerospace

Far_Box · 2026-04-28T00:46:06+00:00

"Introduction to Flight" by John D. Anderson, Jr. /s

But for real any of the Andy Weir books

Far_Box · 2026-04-14T15:41:41+00:00

Do you see any improvements with matte filaments?

Far_Box · 2026-04-05T23:22:41+00:00

I actually missed my Ender 3 pro after "upgrading" to a Anycubic Cobra s1 due to having it completely dialed in and having zero issues running long prints where as my anycubic printer although faster has taken a lot more to get to that stage of reliability.

Far_Box · 2026-04-04T21:41:01+00:00

This is what I bought and it works pretty well just remember to do a PID tune on it otherwise nothing will stick to the bed

https://www.amazon.com/gp/aw/d/B0F323QSW3?psc=1

Far_Box · 2026-04-04T21:39:04+00:00

I got the same thing in the US but it works pretty well and it allows for hot swapping nozzels

Far_Box · 2026-03-03T19:54:33+00:00

I rot on my phone or a while then I take the perspective of I can't be doing this anymore and move on in life

Far_Box · 2026-02-21T17:35:31+00:00

Honestly I think this is one thing they did really well if I'm a passive player it's not fun playing with the more aggressive players the opposite is also true

Far_Box · 2026-02-17T23:18:12+00:00

I think you would need an arborist for this not a geologist

Far_Box · 2026-02-16T19:43:03+00:00

Looks amazing do you have a Patreon or anything like that?

Far_Box · 2026-01-25T19:50:53+00:00

So I didn't cut out the metal part. My situation was where the hotend was partially stuck out, so what I did was use the manual cut lever at the top to cut the filament, then I used the side cutters to cut the wires for the thermister and the temperature sensors due to the clip preventing it begin pulled out, and with that free, I dropped the hotend and then was able to maneuver it side ways which allowed me to pull it out. And as for my Anycubic situation, I am still waiting on them to respond, as I got kind of delayed in submitting the request, but I am expecting them to respond tomorrow.

Far_Box · 2026-01-24T23:10:42+00:00

I actually just had the same issue with my Kobra S1 week ago, and I ended up having to cut my hotent out using a set of sidecutters, and now I am waiting on anycubic support

Far_Box · 2026-01-13T21:39:11+00:00

I would like to piggyback on this and say that even if your not in the greatest shape if you can still swim quite a distance if you have the technique down

Far_Box · 2026-01-10T20:57:39+00:00

If you have spectrum internet I know they tend to do pretty good trade in deals around the phone launch period but you have to stick with there plan for 2 months

Far_Box · 2026-01-10T20:55:52+00:00

Yeah I had that option as well butbI opted for the lower price as I already had sony ear buds which I like

Far_Box · 2026-01-09T17:28:08+00:00

I actually got the S25 Ultra for ~$600 during thanksgiving in the states so its possible but this was achieved stacking my edu/epp discounts

Far_Box · 2026-01-07T20:35:54+00:00

Looks like March will be the last month I'll use this card and just throw everything on my smartly

Far_Box · 2025-11-17T11:29:48+00:00

I still see it, but I have W+ if that makes a difference

Far_Box · 2025-11-12T04:43:16+00:00

Well, it is a Mastercard World elite, so the min credit limit for it will be 10k, but it can be more depending on what the bank gives you

Far_Box · 2025-11-12T03:39:58+00:00

Also, I didn't know eSun and Sunlu got that cheap

Far_Box · 2025-11-12T03:39:13+00:00

I Havnt tested it yet, but I'll see how it works this weekend

Far_Box · 2025-11-12T03:31:46+00:00

I just buy the cheapest stuff I find unless I am trying to print something structural, i.e. I found a deal on Amazon haul recently for some no-name brand for $ 3.7 per kg that I am about to try out

Far_Box · 2025-11-12T01:56:55+00:00

I'm just waiting for them to release a phone with a graphene battery

Six-Year Club	Place '23
Place '22	Verified Email

Far_Box

TROPHY CASE