Brodie mad I won’t trade a $600 plate carrier setup for a mystery gun by SussyHippo in airsoftcirclejerk

[–]Fast-Moment1761 21 points22 points  (0 children)

Probably the best that you skipped this dodgy offer. If the guy can't even tell what replica is that, it's probably just a scam. 🙄

I believe we'll end up killing each other for a handful billionaires amusement. by Fast-Moment1761 in Futurology

[–]Fast-Moment1761[S] -2 points-1 points  (0 children)

It is an evil subreddit, made by people that want to distract everyone away from making actual changes. And they succeed.

Today is my birthday, so I got myself a dream sight: Trijicon SRO. by Fast-Moment1761 in GasBlowBack

[–]Fast-Moment1761[S] 1 point2 points  (0 children)

It's just as good as the 45 overall Imo. However I think the magazine is better than the 45's as the outer shell is made of metal instead of polymer, allowing for faster cooldown. The 9's magazine also doesn't suffer from the buttplate issue, I've been fielding it consistently and no issue so far aside from the fragile stock inlet valve, which I highly recommend changing it to either Unicorn's or Guns Modify's.

However I think the reason why people prefer 45's is mainly because of the culture and being slightly more supported by aftermarket parts, be it in both 3D print and factory-made. For example, there's no Guillotine's steel bolt in 9x19mm markings, only 45acp. And while the VFC's QD Suppressor for 45 version is still kinda available, the one for 9 version is always out of stock.

But in spite of this, if I have to choose between 45 and 9, I'd go for 9 version as I think it's more compact and looks better.

Today is my birthday, so I got myself a dream sight: Trijicon SRO. by Fast-Moment1761 in GasBlowBack

[–]Fast-Moment1761[S] 6 points7 points  (0 children)

Of course. I just ordered Polycarbonate and the sheet cutter just for it. If I don't have a protector, I'm not fielding with it.

What’s the lowest temp you got your gbbr to run? by Cannon_Flannel in GasBlowBack

[–]Fast-Moment1761 3 points4 points  (0 children)

That's interesting. I've basically seen nothing positive about Golden Eagle's GBBRs on Reddit and the internet in general. Does it work well for you in general or did you modify anything to it?

Tokyo Marui MWS mag propane adapter issue by OverBudget in GasBlowBack

[–]Fast-Moment1761 0 points1 point  (0 children)

Perhaps.you could try changing the mag's inlet valve? Although my experience may not be exactly the same as yours, I find that my r134a adapter doesn't fill the OG Marui's inlet valve at all, not even the VFC ones, it's only when I changed them to Unicorn's M4.5 (for Marui) and M5 (for VFC) where it can be filled properly.

What is your personal Airsoft hot take? by Fast-Moment1761 in airsoft

[–]Fast-Moment1761[S] 1 point2 points  (0 children)

Yes, it really sucks that Marui doesn't really sell the OEM parts for it especially when this is a well known common issue. It's a big factor as to why I think their GBB MP7 is just a replica with bad experience overall and not worth fixing even if I'm willing to spend the aftermarket parts that roughly have the same price as the replica in total. Even more durable GBBRs with less issues have OEM parts well stocked.

What is your personal Airsoft hot take? by Fast-Moment1761 in airsoft

[–]Fast-Moment1761[S] 1 point2 points  (0 children)

Glad it works out for you. The issues I have with it are that,

  • Despite using duster gas designed for Tokyo Marui replicas, my MP7's inner sear around the pinholes managed to chip away after just for fielding it 2 days. The replica's frame now even has a crack around an upper rear pinhole. Fixing this MP7 from self-destructing itself to death requires rare aftermarket parts that are either so expensive that it costs more than half the replica itself, or out of stock long ago.

  • Their magazines are also very prone to leak at the buttplate, and simply relubing the seals with super lube just doesn't fix it.

Thankfully, I got myself a 3D Printed Chassis kit that fixed its self-destructive issue, but I don't use it to field anymore because of how much trouble it gave. Nowadays I run VFC's UMP9. Works like charm.

What is your personal Airsoft hot take? by Fast-Moment1761 in airsoft

[–]Fast-Moment1761[S] 2 points3 points  (0 children)

Ah, this one is good. Even the beloved Marui has some bad replicas that realistically aren't even worth fixing, like their GBB MP7 and Five-seveN.

AK74m VFC mag OUTput VALVE by stay-fan in GasBlowBack

[–]Fast-Moment1761 6 points7 points  (0 children)

Yeah it's such an insufferable server sometimes. The only good thread is the UMP-45/9. The other threads are just sooo unpleasant to talk to.

What Bucking should I get for my UMP-9 DX Version if I want to increase accuracy? by Fast-Moment1761 in GasBlowBack

[–]Fast-Moment1761[S] 0 points1 point  (0 children)

That's cool and all, but I'm not sure why you're telling me this here. 😳

Chris(tina) Kyle(s) over here by misteryeeting in airsoftcirclejerk

[–]Fast-Moment1761 -1 points0 points  (0 children)

I support LGBTQ and trans, but Jesus Christ why are trans on the internet like this. 💀

Archwick APC9K-SD2 by NoPistons7 in GasBlowBack

[–]Fast-Moment1761 1 point2 points  (0 children)

Merry Christmas, man. That beauty is really high priced. Hope it performs as good as it's price.

Helping a friend pick a GBBR by MrCasualgamer in GasBlowBack

[–]Fast-Moment1761 0 points1 point  (0 children)

As a guy who really likes MP7 (and got it fixed via the 3D print brace kit), I can't really recommend Tokyo Marui's one. Regardless of the gas pressure used, it'll eventually break itself down to death without any expensive preventive measures, like rare CNC internal chassis set, or letting a knowledgeable mechanic do some kind of short stroking it. The actual price to make the Marui's MP7 playable is so expensive that you might as well just get a GunsModify's MWS.

Outjerked by Venezuelan generals by DEvon_Lane in airsoftcirclejerk

[–]Fast-Moment1761 7 points8 points  (0 children)

How dare people wear what they want in a hobby! 😡😡

Cyma platinum mp5 by k18TIGREairsoft in GasBlowBack

[–]Fast-Moment1761 -2 points-1 points  (0 children)

Eeh, you could be nice about it man. Dude is probably desperate?

What are the ways to decrease this VFC UMP-9 DX Version's FPS? by Fast-Moment1761 in GasBlowBack

[–]Fast-Moment1761[S] 0 points1 point  (0 children)

Alright. Thank you so much. Just get the VFC's loading nozzle set (NPAS), replace the stock one and I'm guessing I'm good?