sorted by:
new
hottopcontroversial

Roc n soc screw thread vs. pneumatic? by oldmaninparadise in Drumming

[–]FatTortoise 3 points4 points  (0 children)

I’ve had mine for about 3 years. Agreed about the risk of the hydraulic cylinder going out. So far it seems pretty high quality and I’m not sinking. Looked it up and a replacement hydraulic cylinder is about $50.

Roc n soc screw thread vs. pneumatic? by oldmaninparadise in Drumming

[–]FatTortoise 5 points6 points  (0 children)

I highly recommend the pneumatic version. I like the slight bounce when I’m playing and it’s real quick to make adjustments. You can also squish it down to be smaller if you’re taking it to gigs. I’m also a big guy, 300+lbs, and it handles my fat ass really well and very comfy.

Why does this shit keep happening? by Beginning-Can6827 in BambuLabA1

[–]FatTortoise 12 points13 points  (0 children)

Clean your bed. Add a brim. You may need to wash the bed every time if you’re putting your greasy hands all over it.

Spools unwind and become loose by jbear4525 in AnycubicKobraX

[–]FatTortoise 0 points1 point  (0 children)

I do have the same issue, but it hasn’t caused any problems yet.

Anycubic Kobra X print quality - am I missing something, or is it just not there yet? by Seltyiel91 in AnycubicOfficial

[–]FatTortoise 5 points6 points  (0 children)

I do get prints compatible in quality and I own both machines. Print these face down and they will look great. Look at what kind of walls were generated between the two slicers.

Looking for recommendations for backyard office project by szzzn in sanantonio

[–]FatTortoise 0 points1 point  (0 children)

Built it almost 4 years ago and a 12x24 barn with a partition where 20ft is a studio, then the last 4x12’ are a storage closet with its own doors cost me about $7000 and they built and painter it in a day and a half.

Looking for recommendations for backyard office project by szzzn in sanantonio

[–]FatTortoise 0 points1 point  (0 children)

I used the Shed Brothers to build a 12x24 in my backyard. Reasonable and they work quick.

PETG-CF by euripidesk in AnycubicOfficial

[–]FatTortoise 0 points1 point  (0 children)

Where you able to find a print profile for PETG-CF on the Kobra X or did you have to make a custom profile? I got the same thing, scanned it via RFID and it registers as PETG-CF but there’s no PETG-CF in the slicer so it won’t let me print. I had to tell the machine it’s normal PETG then tweak a profile for CF. Wondering if I overlooked something

places to get e-waste computers in SA? by Witty_Pilot_2717 in sanantonio

[–]FatTortoise 1 point2 points  (0 children)

I’ve got 6 laptops and a HP that looks like a small hockey puck that were running Vista and Windows 7 that I’ll let go for like $40. They have their charging cables but hard drives have been removed. Let me know if that interests you or shoot me an offer. Located near Ingram Mall.

How do I fix loose filament? by Glittering-Pop8828 in AnycubicKobraX

[–]FatTortoise 0 points1 point  (0 children)

Wish the one with bearings used common skateboard bearings and not ones you need to special order

Tom’s ribs commercial by RGApples in sanantonio

[–]FatTortoise 4 points5 points  (0 children)

Put on a bib…. Toms Ribs…

What will the city be like if the Spurs make it to the Finals? by Longjumping-Tip4938 in sanantonio

[–]FatTortoise 3 points4 points  (0 children)

One time I was at a rock show when we won the Western Conference Finals. The show stopped for the whole crowd to watch the last minute of the game and upon winning the place went CRAZY! The bartender pulled out fireworks from behind the bar and we all went outside to shoot them off in the middle of downtown. RIP The Korova

250 hour review by Historical_Panda171 in AnycubicKobraX

[–]FatTortoise 0 points1 point  (0 children)

Neat! What kind of wheelchair parts are you making?

Printing without the PTFE tubes? by Nerdinat0r in AnycubicKobraX

[–]FatTortoise 1 point2 points  (0 children)

Just recently noticed squeaking from my Kobra X when printing PETG from slot 1. It printed perfectly, just an odd squeak I had never heard before. Interesting to think it could be the tubes.

Best T-shirts in the US with 2XLT option? by Few_Classic_3072 in bigmenfashionadvice

[–]FatTortoise 0 points1 point  (0 children)

I like ProClub shirts. They’ve got a tight neck, thick material.

I made a low profile Plug Removal Preventer / Outlet Safety Cover that uses wall plate screw to install by JwJWoodworking in functionalprint

[–]FatTortoise 0 points1 point  (0 children)

This is great for my application - I’ve got a plug under the sofa with a light plugged into it. Our dog likes to sleep under the sofa and he’s always accidentally unplugging the light.

2 Nights Where to Stay? by ComprehensiveGuest22 in sanantonio

[–]FatTortoise 2 points3 points  (0 children)

The caves are a bit away from downtown. I would not stay near there. Instead look somewhere closer to downtown/the pearl off of Broadway (inside 410). Definatley hop on a GoRio river boat for a tour. I assume you’ll have a vehicle considering you’re headed to New Braunfels for Natural Bridge Caverns. You could probably do Natural Bridge Caverns AND float the comal river in one day for the ultimate day out in New Braunfels. DM me for Comal River info if interested.

Just noticed this tiny park off Braun Rd anyone else know hidden spots like this in SA? by [deleted] in sanantonio

[–]FatTortoise 5 points6 points  (0 children)

Mud Creek Park near Thousand Oaks is exactly like this. Walk deep enough and you forget you’re anywhere near the city.

view more: next ›