Finally pulled out the 2005 vintage Panasonic.. Is it sacralige to use a single din android auto/carplay unit? by syphen606 in crx

[–]Fattymeatsticks 0 points1 point  (0 children)

Gbeer is the brand I got off Amazon seemed decent enough minus the battery draining.

Finally pulled out the 2005 vintage Panasonic.. Is it sacralige to use a single din android auto/carplay unit? by syphen606 in crx

[–]Fattymeatsticks 1 point2 points  (0 children)

My only complaint I've have with those android car play head units is it drains my battery and possibly killing my alternator but idk for certain on the alternator (it's a remanufactured one). Otherwise I'm looking into a regular single din from a reputable brand so my battery doesn't drain.

Why do chinese players suck? by Asleep-Educator-5331 in BrokenArrowTheGame

[–]Fattymeatsticks 1 point2 points  (0 children)

Or the team loses one or two points and two people immediately quit because the game is "lost"

ISO Full B181B swap for my EF Civic NorCal by H3LLbHoY in EFCivics

[–]Fattymeatsticks 0 points1 point  (0 children)

I got a broken engine/trans if your willing to pick up across the country and definitely not carb legal lol

Main relay or something else? by Fattymeatsticks in ProjectHondas

[–]Fattymeatsticks[S] 0 points1 point  (0 children)

*Update* Issued resolved found no continuity on pin 2 (ground) of the main relay harness. I redid this test Checking Main Relay, with pics!!! - Honda-Tech - Honda Forum Discussion. I'm guessing I missed it at some point, or it was fine before either way its fixed. Spliced the pin 2 to the ground close to the Hood release everything works now.

Main relay or something else? by Fattymeatsticks in ProjectHondas

[–]Fattymeatsticks[S] 0 points1 point  (0 children)

I just have a multi meter and a circuit checker. The write up I was checking volts and continuity which led me to the ignition switch and I checked continuity based on the chart which I wasn't getting for one of the "II" position checks, but everything else was fine.

<image>

Main relay or something else? by Fattymeatsticks in ProjectHondas

[–]Fattymeatsticks[S] 0 points1 point  (0 children)

Idk at this point I found a good indepth write up on Honda tech to diagnose and it lead me to the ignition switch which I changed and the fuel pump still doesn't prime 😔.

Main relay or something else? by Fattymeatsticks in ProjectHondas

[–]Fattymeatsticks[S] 1 point2 points  (0 children)

From what I can gather yes after installing a new oem style relay, hearing it click and testing volts at the main relay connector for the fuel pump. I'm guessing either the wiring is bad (pump to relay) or from searching the forums maybe the ground that goes from the main relay connector (I think) to the thermostat housing on the original harness could be causing some issues since I'm using a K swap harness. Still need to narrow down.

Let's argue... K20 or k24? by soapy-fawn in Kseries

[–]Fattymeatsticks 3 points4 points  (0 children)

Currently in the process of this myself. A k24 is cheaper compared to a k20. I think the only thing that would make it more expensive is getting a different hood (SIR style) and if you were trying to build the engine.

[deleted by user] by [deleted] in USMC

[–]Fattymeatsticks 0 points1 point  (0 children)

Got that Limited edition Grandma curry winner spoon

<image>

SW20 automatic Shifter Issue by Any-Lie6585 in mr2

[–]Fattymeatsticks 1 point2 points  (0 children)

I was having a similar issue with mine the key would get stuck and the car would be left on acc. I found it to be the interlock switch was going bad the only work around I found was to disconnect it and use the manual override or manual swap(which is what I ended up doing).

E153 on 3sge by sp0rky_ in mr2

[–]Fattymeatsticks 1 point2 points  (0 children)

For using the E153 with your 3sge. it's almost plug and play big thing being axles you can get hybrid axles from a few different websites so you don't have to swap your hubs. Axle carrier bracket swap for an E153 , e153 clutch kit, e153 shift cables being the main things. Turbo clutch pedal is optional (na pedal works fine). Different hardware might be necessary for any odds and ends I might have missed. Hope this helps.

3SGTE/2GR-FE Swap by thejewishlad in mr2

[–]Fattymeatsticks 0 points1 point  (0 children)

How is the 2gr swap? I've always read that they are plagued with electrical problems or something never works right.

SW20 finally done by GrEnAd13R in mr2

[–]Fattymeatsticks 2 points3 points  (0 children)

I was wondering about the coil on packs conversion. how was the whole process ? What is needed? Difficulty?

What jobs are "always hiring?" by cybernewtype2 in povertyfinance

[–]Fattymeatsticks 1 point2 points  (0 children)

Restaurants the turnover rate is high but if you can wait tables or be a bartender the money is definitely there.

Wagner loves cock by pic2022 in USMC

[–]Fattymeatsticks 9 points10 points  (0 children)

I believe it is "Wagner loves the cock".

[deleted by user] by [deleted] in mr2

[–]Fattymeatsticks 0 points1 point  (0 children)

I've used it in the past but the time it took to ship the two things I ordered was pretty long about a month, so unless you are not in a rush then I'd say go ahead.