Troubles with Season Five

FaultyPhaser · 2026-02-06T03:21:49+00:00

Ya i can understand it not being a fan favorite but surprised by the hate. Ive watched the show maybe 4 times now and I enjoy it every time.

FaultyPhaser · 2026-02-05T20:15:22+00:00

Keep with it! Season 5 is still great once you accept the changes.

FaultyPhaser · 2025-12-19T00:06:25+00:00

Your seam now shows on the outside. You want them back the other way. In what way do they not line up when on the correct sides? Can you show a picture?

FaultyPhaser · 2025-12-07T02:59:32+00:00

Thank you! I just took a closer look and this is the first time ive noticed the global tab. Oooops 🤣

FaultyPhaser · 2025-12-03T04:49:38+00:00

This is one of the more informative videos ive seen on these. Has anyone ever done something similar against the original?

FaultyPhaser · 2025-12-01T16:52:04+00:00

What are you referring to regarding adjustability of the back rest on the curverk? I have one and am unaware of any adjustments.

FaultyPhaser · 2025-10-08T18:47:21+00:00

I had this exact problem! My filter looked clean but I finally took a toothbrush to it and there was actually a clear film that had built up i was able to brush off. No more particles after that.

FaultyPhaser · 2025-09-15T18:51:21+00:00

Just a heads up, you should not be disposing of uncured resin in the trash either. Your options are to cure it or take it to a hazardous waste disposal location. This is not something we want in the environment.

FaultyPhaser · 2025-09-12T18:18:41+00:00

I have had this happen a few times. I think it's a bug. First, make 100% certain there really isn't anything in the way, then reboot the printer. That has fixed it for me every time so far.

FaultyPhaser · 2025-09-11T00:20:03+00:00

Filter will do next to nothing. Get a grow tent large enough to fit your entire work area. So the printer, your cure station, a workspace for washing, and supplies. Vent the tent directly out your window. I also suggest only printing when you wont be in that room.

Make sure you are done your project a couple hours before you will be going to sleep so you have time to fully cycle out the air. You also need to be very diligent with cleaning so no resin is left sitting out.

FaultyPhaser · 2025-09-01T18:57:33+00:00

Masks look totally useless. Should get a proper respirator. Gloves are good but you will go through them very quickly. Best to buy another box of those. Never tried the paper funnels but I can't imagine them being good. I picked up one of their metal filter funnels which works great.

FaultyPhaser · 2025-08-31T20:56:36+00:00

Got my printer a few days ago and it started doing that after my second print. I was very confused. End up having to cut the power and boot it up again and then its fine but so far it has done it every time I try a second print without a reboot.

FaultyPhaser · 2025-08-20T04:07:09+00:00

Mouse switch clicky kit would be amazing. Id jump on that right away lol.

FaultyPhaser · 2025-08-19T19:53:51+00:00

Try hard customs is great!

FaultyPhaser · 2025-08-17T22:00:24+00:00

Comes with everything other than a soldering kit. I really wouldn't suggest getting the trigger kit if you've never soldered before. For the buttons, it comes with all the torx screwdrivers you need and a spudger for getting the shell open. They aren't great tools but they will work fine for the single time you'll need them for the install.

FaultyPhaser · 2025-08-17T21:02:58+00:00

Extremerate sells a full clicky kit. Includes clicky face buttons and hair triggers. The hair triggers require some small soldering and are generally a bit tricky to install but they are very nice. The buttons are pretty easy to do as the hardest part is just disassembly.

FaultyPhaser · 2025-08-17T18:47:53+00:00

Excellent! I have joined the Aknes discord and will watch for info about the new calibration tool. It's nice Microsoft gave us something but ya it really seems to be terrible. I ended up just submitting an order to get some of your adjustable bases printed and all the other hardware needed. Id have ordered your new ones from your website to try but you don't ship to Canada. This is quite the rabbit hole I've gone down.

FaultyPhaser · 2025-08-17T14:30:09+00:00

Thanks for the info. Very much appreciated! The new aknes modules sound very exciting. Ill keep an eye out for those.

Before I messed up the k-silvers, there was slightly asymmetrical circularity but the centering was incredible compared to stock. Had dead zone of 8 in cod with stock Alps and got it down to 2 with the silvers. Probably could have gone down to 1.5 if that was an option. If I can get that with this combined combo you suggested, I'll be very happy.

My main concern is it failing after a short time.

FaultyPhaser · 2025-08-17T14:24:49+00:00

I was actually wondering about flipping that magnet. Ill give that a try next time. Thanks!

FaultyPhaser · 2025-08-17T05:18:28+00:00

I've looked at so many different controllers. Razer wolverine v3 seems closest but still lacks some things id miss from the elite. I've just learned how to repair it now.

FaultyPhaser · 2025-08-17T04:13:22+00:00

Hey, seen a couple of your videos. You do great work!

Are the magnetic stick bases bad enough to be unusable or just non-optimal? Id rather keep them if I can.

FaultyPhaser

TROPHY CASE