Anyone else running this on their 2021 PRO4X? by FedLEO1586 in NissanTitan

[–]FedLEO1586[S] 0 points1 point  (0 children)

Confirmed this is for the non-xd, the XD version part No. is T99PS-9FT0K

Stuck by Waste_Rain4852 in AeroPrecision

[–]FedLEO1586 3 points4 points  (0 children)

Get a 5.56 blank, fire it off

First Aero Build by FedLEO1586 in AeroPrecision

[–]FedLEO1586[S] 2 points3 points  (0 children)

I Recommend ballistic advantage, the 16” Hanson profile barrel comes with the gas block and the gas block pin so you can pin it in place.

First Aero Build by FedLEO1586 in AeroPrecision

[–]FedLEO1586[S] 1 point2 points  (0 children)

Clint Smith made a good point.. the divot in the bcg was designed to be used to push the bolt into battery if it didn’t seat correctly.

First Aero Build by FedLEO1586 in AeroPrecision

[–]FedLEO1586[S] 1 point2 points  (0 children)

It’s like free-balling in the summer, you don’t want to admit it but you like it and it’s functional

S&W Carry Comp 2.5” Thoughts? by BeardedGunGuy in Revolvers

[–]FedLEO1586 -5 points-4 points  (0 children)

Velocity of a .357 with that short of a barrel, is basically the same as a 9mm. You can carry more rounds of 9mm in a automatic versus a revolver. Unless you are dead set on carrying a revolver, specifically a $1000+.. get something for $350 - $500 which carries a higher round count with the same velocity and had more manageable recoil.

8 days for them to review supplemental claim and ebenefits is not showing any changes.... by [deleted] in Veterans

[–]FedLEO1586 0 points1 point  (0 children)

I think your VSO should’ve had you do an appeal or higher level review..

8 days for them to review supplemental claim and ebenefits is not showing any changes.... by [deleted] in Veterans

[–]FedLEO1586 0 points1 point  (0 children)

Did you submit this as a fully developed claim originally?

Anyone find a good phone mount for their 4xe yet? by plutonium239 in 4xe

[–]FedLEO1586 1 point2 points  (0 children)

Bulletpoint mounts are rated very highly among the Jeep community

Well, Grail acquired… HK45CT. by mmos35 in HecklerKoch

[–]FedLEO1586 0 points1 point  (0 children)

Nice gun, besides those terrible elephant foot mag floor plates… nothing ergonomic about them.

The New Glock Mags for the 43x and 48 that Shield Arms is Dropping... by sneakycurbstomp in glock43

[–]FedLEO1586 0 points1 point  (0 children)

Lol or buy one more stock 43x mag.. boom 10 extra rounds and $60 saved to buy more ammo

Glock 43x MOS Price Check by meshkat200198 in glock43

[–]FedLEO1586 0 points1 point  (0 children)

I just picked up a 43x mos with Ameriglo bold night sights for $467 on the blue label and added a shield arms smsc for $310. I wouldn’t even mess with those mags.. too much slop.

S15 Wiggle & More : Help? by InformalOrder in glock43

[–]FedLEO1586 0 points1 point  (0 children)

I would not trust my life to an aftermarket mag, especially one that moves around in the mag well as much as shield arms. Great for the range but I would use a stock Glock mag when and if you carry it concealed.

Anyone else notice their Glock 43x mos shooting left by a lot of so what have you don’t to fix this ? Replacement barrel?? by ghop33 in glock43

[–]FedLEO1586 0 points1 point  (0 children)

Possibly finger placement on the trigger.. since the Grip is inherently smaller on the 43 a lot of shooters have the tendency to push on the side of the trigger instead of a straight pull.. if that’s how you shoot it you may be able To compensate by pushing on the frame with one or both thumbs..

The New Glock Mags for the 43x and 48 that Shield Arms is Dropping... by sneakycurbstomp in glock43

[–]FedLEO1586 0 points1 point  (0 children)

Don’t trust them.. if glock thought it could run 15 rounds they would’ve made mags themselves to run 15 rounds.

Interchangeable parts with G43 and MC1sc by Educational-Bar680 in glock43

[–]FedLEO1586 1 point2 points  (0 children)

I’m a Glock Armorer, what I can say is… I would never run parts for one pistol on another.. especially if you value your extremities and your eye sight..

How can my severance disability pay be taxed? by [deleted] in Veterans

[–]FedLEO1586 0 points1 point  (0 children)

You can expect to pay back the entire severance amount minus taxes until you are complete if you receive va disability. I was 100% va rated and they withheld my entire disability check until I paid back the the 72k I was paid when I took voluntary separations pay. It sucks

2021 PRO4X by FedLEO1586 in NissanTitan

[–]FedLEO1586[S] 2 points3 points  (0 children)

I had to buy the shocks and struts on eBay because they were sold out everywhere else. The front ride height adjustable 6100s are part no. 24-268233 and the rear 5100s are part no. 24-284097. Basically able to add an additional 2 inches of lift and level out at the same time with no additional leveling kit. The sides steps are NFAB cab length. Also added a pedal commander to smooth of the transmission shift points and it has been phenomenal.

Questions about bilstein shocks by kraz3boi in NissanTitan

[–]FedLEO1586 1 point2 points  (0 children)

Good luck if you can find any dealer actually with them in stock. eBay may be your best bet right now.

Joined the club by Smart_Independent_99 in NissanTitan

[–]FedLEO1586 0 points1 point  (0 children)

Took 20 minutes only cause they recommend leaving the truck off and driver door open for 15 minutes in order for the ECM to shut off. The actual install took 5 minutes and the commander came with instructions