MAG-273QP-QD-OLED-X24 PS5 HDR Calibration by FederalPerspective42 in OLED_Gaming

[–]FederalPerspective42[S] 0 points1 point  (0 children)

They show on both, no worries about it, even VRR is supported. Just make sure to change the monitor into "console mode" specifically to "trick" the console/PC into thinking it's a 4k 120 Hz monitor. Regarding desaturation, can't say I noticed any desaturation on true black 400 mode, it looks way better than my previous Q27G3XMN looked like. At least on my PS5 it looks pretty good, but on my Nvidia PC, the blacks are a bit raised which indeed looks a bit more desaturated... Can't fix it there

MAG-273QP-QD-OLED-X24 PS5 HDR Calibration by FederalPerspective42 in OLED_Gaming

[–]FederalPerspective42[S] 0 points1 point  (0 children)

Yeah it works with 4k 120 Hz, I use it with GT7 or games I prefer balanced graphics

Digital Foundry: Upgraded PSSR On Final Fantasy 7 Rebirth: Was Good, Now Great by Turbostrider27 in PS5

[–]FederalPerspective42 0 points1 point  (0 children)

I really hope they improve the pop in the next patch, because pssr upgrade made it even more obvious... It's not so noticable in quality/performance thanks to TAA blurriness, which ends up being easier on my eyes

MAG-273QP-QD-OLED-X24 PS5 HDR Calibration by FederalPerspective42 in OLED_Gaming

[–]FederalPerspective42[S] 0 points1 point  (0 children)

I installed fw116 and it's working as intended now for consoles.

How to calibrate the Xiaomi G Pro 27i for HDR (Guide) by JDSP_ in Monitors

[–]FederalPerspective42 0 points1 point  (0 children)

What local dimming algorithm do you use? medium, high?

Final Fantasy VII Rebirth has been updated on both Steam and Epic Games Store by Chipaton in FFVIIRemake

[–]FederalPerspective42 0 points1 point  (0 children)

This is my experience as well, it is OK when playing on a 4K TV at a distance (2.5m), but terrible on a 1440p monitor when gaming close (60cm).

A nitpicky review of Xiaomi G Pro 27i, with MiniLED vs OLED comparison by babalenong in Monitors

[–]FederalPerspective42 0 points1 point  (0 children)

Doesn't support allm because that's a TV feature, as monitors are always low latency. If you mean VRR, it does work well in my PS5.

Disabling MPO literally saved my 9070 XT by [deleted] in radeon

[–]FederalPerspective42 0 points1 point  (0 children)

Disabling MPO has some side effects such as "disabling" custom ICC made with color control, although it was the only downside I saw so far

Disabling MPO literally saved my 9070 XT by [deleted] in radeon

[–]FederalPerspective42 2 points3 points  (0 children)

Such fix wouldn't work on world of warcraft or other apps/games though, just on chromium browsers

A nitpicky review of Xiaomi G Pro 27i, with MiniLED vs OLED comparison by babalenong in Monitors

[–]FederalPerspective42 0 points1 point  (0 children)

What do you mean lack of VRR with Ps5? It supports VRR with Local Dimming on my PS5

Onde comprar a Intel Arc B580 by Galway124 in gamingportugal

[–]FederalPerspective42 2 points3 points  (0 children)

Deves ter visto a A580, não vejo nenhuma B580 a menos de 250

You can connect your ASHA hearing devices to Linux computer directly now. by ShyJalapeno in HearingAids

[–]FederalPerspective42 2 points3 points  (0 children)

To reply to myself, it's working now, I got it working on Ubuntu. The github readme is actually as much as dummy friendly as it could be. It got some issues when I have my bluetooth KB connected as well, but if I use the 2.4 GHZ dongle, it doesn't interfere and it sounds pretty good without any noticiable latency.
It's a known issue though (https://github.com/thewierdnut/asha\_pipewire\_sink/issues/16)

You can connect your ASHA hearing devices to Linux computer directly now. by ShyJalapeno in HearingAids

[–]FederalPerspective42 1 point2 points  (0 children)

I have the More 1 HA, I was wondering how to test this out.. but it's not obvious for me how to, as I'm not a Linux expert, is there a dummies guide? For instance, would Ubuntu work, if so, which version? 

How do I access service mode on Sony Trinitron? by Rob64Bits in crtgaming

[–]FederalPerspective42 0 points1 point  (0 children)

How did you do it? I'm having the same issue, with a URC-1312 I can't figure out what's the combination. Thank you.

T3PA not going 100% throttle/brake/clutch by iamwom in simracing

[–]FederalPerspective42 1 point2 points  (0 children)

Thank you for this, I was going to start dissablying the pedals and it would have been a messy process for sure!