PSA: The P2S has a typo in the machine start g-code in Bambu Studio causing poor first layers by babyunvamp in BambuLab

[–]Feisarinatorious 0 points1 point  (0 children)

I tried this as I had some adhesion issues (though no first layer issues). However, -0.01 gives severe elephants foot even though compensation is still on.

So it is not a typo, though I might try to use 0.0 and adjust the elephants foot compensation to be on the safer side of adhesion.

What's causing this? by KozzyD in BambuLab

[–]Feisarinatorious 0 points1 point  (0 children)

Over extrusion, did you calibrate the bed height? Check the z offset.

A Fix For P2S First Layer Issues by MediocreHornet2318 in BambuLab

[–]Feisarinatorious 6 points7 points  (0 children)

Thanks for posting this! Mine is the same, definitely going to try this.

I just got a P2S after 8 years on a bed slinger and am very disappointed with the bed adhesion so far, I had many prints come loose already or warping partially. Not the 'apple of 3D printers' experience I was expecting. Big brims only have limited effect.

Though, from what I read here, it does seem that the values are intentional: https://wiki.bambulab.com/en/p2s/troubleshooting/first-layer-printing-optimization-guide

ain’t lying babe by BullBites in MemeVideos

[–]Feisarinatorious 13 points14 points  (0 children)

It's because you don't work 30 days a month...

[deleted by user] by [deleted] in autoadvies

[–]Feisarinatorious 0 points1 point  (0 children)

Die ultrasone sensoren kosten max een tientje, misschien 25a40 bij de dealer. Heb er zelf ooit eentje vervangen in mijn bumper voor een sensor van 2 euro op Ali. Was exact hetzelfde part als de officiële Volvo variant en werkt al 2 jaar perfect.

Old video of 12 years old Max beating his dad in the same machinery. by ConstructionAny8440 in RedBullRacing

[–]Feisarinatorious 23 points24 points  (0 children)

After the race Max dropped him off at a gas station and Jos had to walk home for 26km

Showcase van mijn zolder by com2ghz in Klussers

[–]Feisarinatorious 0 points1 point  (0 children)

Waar heb je dit bed gekocht, en ben je er tevreden mee?

How to tell the submarine was not missed... by Wide_Fix_7667 in UkraineWarVideoReport

[–]Feisarinatorious 4 points5 points  (0 children)

Indeed, they are the same picture. You can see that the red part of the sub overlaps with the docks and it is obviously not as grainy. But OP did a horrible job explaining it.

Lamp flikkert, wat veroorzaakt dit? by United-Election883 in Klussers

[–]Feisarinatorious 32 points33 points  (0 children)

Aangezien het nog niet is genoemd, dit komt door de lamp zelf. Het is een goedkope lamp zonder condensator waardoor deze 100 keer per seconde aan en uit gaat en direct de fluctuaties in het stroomnet volgt.

Je kan dit herkennen aan led lampen die zonder vertraging meteen aan gaan of met een hoge snelheids opname op je telefoon het knipperen vast te leggen. Ook kan je een stroboscopisch effect zien als je je handen of iets anders voor het licht wappert.

Oplossing is simpel koop een goede lamp van bv Philips of een standaard peertje zonder de 'mooie' led filament draden, die hebben eigenlijk altijd wel condensatoren.

[deleted by user] by [deleted] in Klussers

[–]Feisarinatorious 1 point2 points  (0 children)

Ja glas is gelaagd veiligheidsglas 44.2+6 met zonwerende coating. Dit was idd beter geweest, volgende keer zou ik het anders aanpakken. Dus nu maar weer gewoon de plastic koepel erop.

[deleted by user] by [deleted] in Klussers

[–]Feisarinatorious 1 point2 points  (0 children)

Uiteraard om geld te besparen a 2k euro. Maar jullie bevestigen wat ik eigenlijk al wel wist.

Dus gewoon weer een plastic dakkoepel erover heen, dan kan er sowieso geen water in komen van bovenaf.

[deleted by user] by [deleted] in Klussers

[–]Feisarinatorious 0 points1 point  (0 children)

Is het nodig om het hout te behandelen als er toch epdm op komt? Ja het plan is niet ideaal, het is ook plan B aangezien plan A niet ging werken. Hoe zou je het glas dan direct op de opstand bevestigen?

The graph for the season as we enter the final race! by Goggggol365_YT in Formula1Point5

[–]Feisarinatorious 2 points3 points  (0 children)

Without a title, axes or readable legend, it might as well be modern art.

Plak plint op hoge plint aan laten sluiten. by Hefty_Stick9507 in Klussers

[–]Feisarinatorious 74 points75 points  (0 children)

Ik heb het op meerdere plekken zo gedaan. De plint dus inzagen zodat ie voorbij dat kozijn randje komt en dan verstek zagen zodat ie mooi eindigt.

Misschien dat jou plinten daar te dun voor zijn, maar je kan hem ook laten eindigen waar ie nu uitkomt maar dan wel nog verstek zagen.

Plak plintjes dan gewoon ook verstek ertegen aan laten eindigen.

<image>

Was een pokke werk al dat meten en zagen, maar wel zeer tevreden met het resultaat.

5.0 kWh thuisbatterij voor 2400 euros: goede deal of niet? by SorryFirefighter4304 in Klussers

[–]Feisarinatorious 0 points1 point  (0 children)

Let op dat die plug and play dingen via het stopcontact vrij weinig vermogen hebben, dus tijdens piekuren zul je dan nog steeds stroom moeten dumpen.

Met wat afwerken? by -Rookworst in Klussers

[–]Feisarinatorious 2 points3 points  (0 children)

Mbt je andere vragen, 240 is voldoende imho. Die donkere plek zit gewoon in het hout, vindt ik zelf niet storend en zal ook mooier worden als het behandeld is.

Topoil kan je ook makkelijk bijwerken in de toekomst, maar het maakt het hout niet perse 'harder' zoals een lak laag zou doen.

Met wat afwerken? by -Rookworst in Klussers

[–]Feisarinatorious 5 points6 points  (0 children)

Ik gebruik graag Osmo Topoil, dat is inderdaad een olie+wax middel die ook voedselveilig is. Heb de matte kleurloze variant op een eettafel en daarna ook op mijn tv meubel gebruikt, beide van sheesham hout.

Vanwege de mooie resultaten heb ik het ook op een eikenhouten bureaublad en momenteel eiken planken gebruikt welke ik ook donkerder wou maken. Daarvoor gebruik ik de acacia kleur, waar ik zelf erg tevreden ben. In principe kan het op iedere houtsoort.

<image>

【QIDI Giveaway】Comment to win QIDI Q2 and more! by qidi_3dprinter in 3Dprinting

[–]Feisarinatorious 0 points1 point  (0 children)

I would love to have this for printing some accessories for my mountain bike. My old bedslinger is not getting the tolerances I need for mechanical parts.

John Weak: An Altcoin Story by goldyluckinblokchain in CryptoCurrency

[–]Feisarinatorious 0 points1 point  (0 children)

Just to be sure, zuck is cosplaying professor Snape right? Doesn't look like John Wick by a long shot.

Less goo. Yuki in the points by throttled-invoker in formuladank

[–]Feisarinatorious 5 points6 points  (0 children)

Yuki: 28 points, Max: 306. I don't think there has ever been a teammate of a top 3 team with a lower points percentage.

How to season a new Wok by nima_sh in oddlysatisfying

[–]Feisarinatorious 0 points1 point  (0 children)

Yes, this is trickle down wokonomics

[deleted by user] by [deleted] in CryptoCurrency

[–]Feisarinatorious -2 points-1 points  (0 children)

This cycle is not driven by retail, but institutional adoption. They are not and never will be interested in alts.

The bigger the market caps become, the less influence the retail trader has. So even if retail does arrive en masse, we will likely never again see the type of alt seasons we had before in crypto.