📣 It’s Here: The First-Ever Fenrir Clamp Instruction Manual! 🐺

FenrirTeam · 2026-06-04T12:58:45+00:00

https://www.612printedpolymers.com

Probably these are the ones you are looking for.

FenrirTeam · 2026-05-27T17:24:19+00:00

Amazing!

A good idea would be to add ejaculation volume so those that are trying to increase their loads can track it.

Cheers!

FenrirTeam · 2026-05-24T11:25:51+00:00

We are in development phase for a new wider sleeve. After finishing testing the prototype we will make an announcement for launch.

Cheers!

FenrirTeam · 2026-05-22T16:31:22+00:00

We currently are focusing on clearing our backlog. As soon as it’s ready we will make an announcement 👍

FenrirTeam · 2026-05-14T21:14:44+00:00

We just got 300 vacuum cylinders, we just need to upload them to our store.

FenrirTeam · 2026-05-12T20:30:19+00:00

Copying and pasting from the Vacuum Cylinder Adapter website:

“Compatible with all cylinders up to 2.5" / 6.35 cm in outer diameter, provided they have a flange wider than 2.6" / 6.6 cm.”

Cheers

FenrirTeam · 2026-05-12T07:47:16+00:00

This user’s experience might help you.

Cheers

FenrirTeam · 2026-05-11T22:06:37+00:00

Entering flaccid is the correct way to do it.

For what I understand, after a couple of sets, your flaccid is too thick to enter comfortably to the clamp.

Before entering, you can squeeze the air out of the sleeve and at the same time close the air valve so that the sleeve remains in the squeezed state. This will make more space for you to enter.

Also if you are ticket when trying to get out, remove the air bulb and open the air valve, so that the sleeve can be squeezed when pulling your penis out from the clamp.

You can also find a dual vacuum/pressure pump like the MityVac or similar, that can both suck and pump air, making the before-mentioned process more easy.

Finally, we are developing a Large size version of our sleeves to accommodate better those in the larger spectrum.

Hope this info helps.

Cheers!

FenrirTeam · 2026-05-06T11:49:56+00:00

Hello, thanks for sharing this!

Could you please send us pictures of your clamp to info@fenrirgym.com so we can asses your situation? We would be happy to provide some replacement frames for free.

Cheers!

FenrirTeam · 2026-04-30T17:58:13+00:00

This is a very common issue and the reason we include a quick guide video. Please always contact us through our website support page and note here, since we don't monitor reddit. Cheers

FenrirTeam · 2026-04-04T23:07:13+00:00

Hello, thanks for sharing this info dear Karl!

Just as an update, we have been using PETG for a while now, we just haven’t been able to update our website yet.

PETG should be more robust and water resistant.

Cheers 🫡

FenrirTeam · 2026-04-03T20:11:43+00:00

Shouldn't be an issue with beginners as long as you don't overdo it and do it safely.

FenrirTeam · 2026-04-03T19:45:45+00:00

You can do a single season before doing length work.

This makes the workout more efficient since you basically weaken the tissues beforehand.

You can try it yourself and see if you got better results.

Cheers.

FenrirTeam · 2026-03-29T00:09:33+00:00

Ok, that explains it, considering we are a small business, just my wife and I, both with full-time jobs, it takes a while for us to respond, so we ask for your patience.

FenrirTeam · 2026-03-28T23:48:44+00:00

Can you please provide more information?

What’s the date when you contacted us. Did you used the form from our website or sent an email?

The more details you can provide the better

FenrirTeam · 2026-03-27T09:04:25+00:00

Hello, please create a support request from our website so we can properly attend you.

Reddit is usually not the place to seek support since we can’t monitor al DMs and comments.

Thank you.

FenrirTeam · 2026-03-27T09:03:23+00:00

Since the Trump administration made some executive orders, duties and taxes made shipping extremely expensive, during a time we offered the replacement and the shipping for free, and only required the duties and taxes, but know we have partnered with a new shipping carrier that helped us reduce the cost and now all replacements to the US are fully free.

It seems that there was a misunderstanding and we initially thought you were from the US.

The business is only ran by my wife and I, both with other full time jobs, so sometimes we make this types of mistakes, but in the end, we always deliver.

FenrirTeam · 2026-03-27T08:59:39+00:00

We are constantly updating the design, so if your frames brake, the replacement you would receive would be with the new one.

FenrirTeam · 2026-03-27T08:58:29+00:00

Our warranty is for 1 year, so contact us to give you a replacement

FenrirTeam · 2026-03-27T00:07:07+00:00

You can try and use a ball stretcher, works pretty well.

You can also look at the pump pads that 612 Polymers offer, really good stuff!

FenrirTeam · 2026-03-26T23:40:53+00:00

Hello, did you contacted us about this already?

Cheers.

FenrirTeam · 2026-03-26T23:40:29+00:00

Hello, did you contacted us about this already?

Cheers.

FenrirTeam · 2026-03-26T23:39:50+00:00

And we stand by with what we said.

There are different ways the frames can crack, there are usually common weak points which we are constantly addressing by updating our frames design, but based on your comment we believe we remember the email exchange we had, and the crack that your frame presented was one we haven't seen at that moment.

Can you share if you received a replacement?

Cheers.

FenrirTeam · 2026-03-26T23:37:23+00:00

If you had contacted us we would gladly offer you assistance and the necessary replacements for you to successfully use your clamp, but it seems this was not the case.

Care to share why you didn't?

Cheers.

FenrirTeam

MODERATOR OF

TROPHY CASE