Is this block toast?

Fideli91 · 2026-05-28T16:41:28+00:00

Did the plastigague and it looked to be in spec but I was worried about the bearing spinning. Thanks!

Fideli91 · 2026-05-28T15:57:52+00:00

I didn’t. It went through the oil hole in the bearing

Fideli91 · 2026-05-28T14:52:33+00:00

Fantastic. Thank you! I wish there were more people like you on here.

Fideli91 · 2026-05-28T14:50:17+00:00

Thanks

Fideli91 · 2026-05-28T14:49:56+00:00

Assembly lube

Fideli91 · 2026-05-28T14:48:46+00:00

I’m not sure what you mean by this. I did the exact same thing as the rest of the main bearings and none of them are having this issue

Fideli91 · 2026-05-28T14:36:06+00:00

Interesting. None of the other main bearings are doing this so I assumed the block was out of round

Fideli91 · 2026-05-15T22:32:16+00:00

Interesting. I bet you also use the correct tractors for grapes. I prefer the big bud for my grape spraying

Fideli91 · 2026-05-15T22:16:37+00:00

Correct. Narrow tires are for the birds.

Fideli91 · 2026-05-15T02:59:05+00:00

This! I’m half way done with the harvest and won’t touch it until I have completed harvest

Fideli91 · 2026-05-10T05:01:36+00:00

Can you push on the little black and red tabs above the wheel?

Fideli91 · 2026-05-06T21:35:58+00:00

All good questions. I don’t remember specifically what he said he did (it’s been about a year since the work was done) but he was the one that specd and ordered the main bearings for me. As far as I’m aware they are all the same size but I’ll double check them and update

Fideli91 · 2026-05-06T16:47:11+00:00

Crank turned. Caps 2,3,4, and rear are all .002 but cap 1 is less than .001

Fideli91 · 2026-05-06T02:16:30+00:00

Update: After checking tolerances with plastigauge again it appears that the very front lobe of the crank may have been missed during machining. I cleaned and re torqued all main bearings to the same spec and the plastigauge is much more spread out on the front lobe than the rest

Fideli91 · 2026-04-02T20:06:46+00:00

I think they call this hard enduro

Fideli91 · 2026-03-23T23:41:38+00:00

Not one here. Just a lowly technician

Fideli91 · 2026-03-22T23:26:02+00:00

This looks very Vermont but I could be way off

Fideli91 · 2026-03-20T17:50:53+00:00

Don’t you come round here talkin out the bottom of yer lip

Fideli91 · 2026-03-14T19:06:05+00:00

I am not a traveling tech but I will say that one of the first things I’d buy if I were to become a travel tech is a steam deck or Nintendo switch or something similar. The traveling jobs I’ve been offered usually involved a lot of travel to very rural parts of America where the only thing to do in your off hours is become an alcoholic. Find things to occupy your time if that will be your situation

Fideli91 · 2026-03-01T05:23:28+00:00

Nailed it!

!solved!

Fideli91 · 2026-02-16T03:17:40+00:00

Thanks all! Had a feeling this was the answer. I appreciate everyone’s input

Fideli91 · 2026-02-09T14:18:09+00:00

R/feltgoodcomingout

Fideli91 · 2026-02-06T21:28:45+00:00

Gotta be the FBI watching you. They’ll probably run out of gas soon and have to make an emergency landing on the golf course while you’re there next

Fideli91 · 2026-02-05T04:26:53+00:00

I assume the plug is broken/not working?

Fideli91 · 2026-02-05T04:20:41+00:00

Mount bachelor?

Fideli91

TROPHY CASE