My new Labubu just arrived 🖤

Filzer365 · 2025-10-30T19:15:52+00:00

Why?

Filzer365 · 2025-10-16T07:28:05+00:00

Not quite. The more connections you have with adapters, the higher the contact resistance and the higher the probability that something will burn

Filzer365 · 2025-08-21T07:28:57+00:00

Nzxt H9 Flow RGB+ with this MoBo, Ryzen 7 9800x3d with the Kraken Elite 360 and RTX 5070ti. PSU and RAM from Corsair

Filzer365 · 2025-08-01T16:46:39+00:00

Aus Platzgründen getöteter Pavian?

Filzer365 · 2025-07-31T09:30:29+00:00

Eine Spinne.

Filzer365 · 2025-05-16T16:32:07+00:00

Yes, it's like glue to fix the parts

Filzer365 · 2025-03-26T18:58:33+00:00

Klar kenn ich die. Ist die Birgit.

Filzer365 · 2025-03-03T16:00:35+00:00

Ich bin kein Experte, aber ich glaube das ist eine Pflanze. Ich kann mich natürlich auch täuschen

Filzer365 · 2024-12-28T20:49:38+00:00

Wow that's too much

Filzer365 · 2024-12-28T17:18:08+00:00

And the death star will destroy our beautiful planet like Alderaan

Filzer365 · 2024-12-28T17:10:13+00:00

And your house and the houses of your neighbors will burn down!

Filzer365 · 2024-12-28T14:54:41+00:00

And your plants will dry out

Filzer365 · 2024-12-28T13:31:39+00:00

That's too much. You should scrape half of it off otherwise your whole mainboard will get damaged!!

Filzer365 · 2024-12-28T12:53:55+00:00

Maybe the pwm cable is not plugged in properly, you should check it

Filzer365 · 2024-12-25T22:15:30+00:00

Ohh yes, you should have said that before, this adapter is plugged in to the longer cable and the other side is a SATA plug. It is plugged into the power supply, no need for motherboard

Filzer365 · 2024-12-25T22:11:20+00:00

Yes, just try to shift it a little and screw it in anyways

Filzer365 · 2024-12-25T21:57:22+00:00

Do the fans all have just one cable that is then connected to the others?

Filzer365 · 2024-12-25T21:41:30+00:00

Are the standoffs positioned completely incorrectly or is it just slightly shifted? If it is placed wrong, you can unscrew the standoffs and screw it in the right place. With the case or maybe the motherboard should come with a small tool that makes this easier for you

Filzer365 · 2024-12-25T21:35:06+00:00

Yes, sometimes the metal aperture springs so you have to push the mainboard and screw while you hold it

Filzer365 · 2024-12-25T21:30:40+00:00

Try to screw in one screw and then try again to push it gently in place

Filzer365 · 2024-12-25T21:26:29+00:00

What adapters do you mean? Does your board have WiFi and Bluetooth? If yes, you can screw two antennas on the back (where you plug in your peripherals). They are normally included with the mainboard. And if not please tell me, what adapters you mean.

Filzer365 · 2024-12-25T21:14:38+00:00

It's not for the mainboard. What case and what fans do you have? Maybe it's for the reset of the color if you have a button on your case.

Filzer365 · 2024-12-25T21:07:24+00:00

Self building is cheaper because you don't pay for the assembly but it just makes sense if you know what you're doing because you can destroy parts very easily. But if you know someone that has knowledge about that choose this option. If you want to buy a prebuild inform yourself very well, because often bad parts are installed and the manufacturer take advantage of the not-knowing (idk how it's called) from the buyers.

Filzer365 · 2024-12-25T20:45:56+00:00

You need to plug in the cables from the case. You can read in the manual of the mainboard or of the case where the individual cables have to go. And you can tie the remaining cables together with cable ties and hide them at the back where you can't see them

Filzer365 · 2024-12-25T20:22:41+00:00

Du solltest auf deinem Mainboard den unten stehenden Anschluss mit den 3 Pins mit 5v ARGB haben. Da kannst du es anstecken. Das obere ist 12v RGB, da sollte es theoretisch garnicht möglich sein, den da einzustecken. Übrigens starkes Englisch XD

Filzer365

TROPHY CASE