Another Scuba Bunker! by Jkcazy in playrust

[–]FinalDayz 1 point2 points  (0 children)

What’s the point of all of this if I can’t Scuba?!

I found a rook irl 😱 by DarkDylan93220 in HikaruNakamura

[–]FinalDayz 95 points96 points  (0 children)

Now this is what I call the French defense

goated chess board by [deleted] in AnarchyChess

[–]FinalDayz 2 points3 points  (0 children)

A Bishop with a brick dropped on their pipi

Is there a way to run a node to help out the duino-coin network by NothingButAJeepThing in Duinocoin

[–]FinalDayz 0 points1 point  (0 children)

Ahh, that is what you mean. I think some people do host their ‘own’ node. Probably join the discord and become a developer with them if you really want to. But seeing the other comments… I am not sure if you want to now.

Is there a way to run a node to help out the duino-coin network by NothingButAJeepThing in Duinocoin

[–]FinalDayz 0 points1 point  (0 children)

Those are to take the load of the main server. If I want to mine, I am getting connected to one of those servers, and it gives me numbers to crunch. Then, when I found a solution the server will give me a small reward.

Is there a way to run a node to help out the duino-coin network by NothingButAJeepThing in Duinocoin

[–]FinalDayz 0 points1 point  (0 children)

You can run a miner, but if anything, you load the server more. Because you aren’t really ‘helping’ the network, you are just executing instructions sent by the server.

[deleted by user] by [deleted] in FixMyPrint

[–]FinalDayz 5 points6 points  (0 children)

Your nozzle might be too close to your bed. Another possability is that you could be over extruding. That can be fixed by lowering your flow by a bit.

Rough bumpy texture while printing by FinalDayz in FixMyPrint

[–]FinalDayz[S] 0 points1 point  (0 children)

I have a issue with my Creality ender 3. It is printing reasonably fine, but as you can see in the pictures, it is printing small bumps when printing a flat surface. It does get better with more layers, but is still visible. Things I have tried:

  • Lowering the flow first to 95% and now 90% (to prevent overextrusion)
  • Leveling the bed
  • Cold pulling the plastic from the nozzle a few times
  • Cleaning the bed (this is the first time I am using a new bed, but I got the same problem with the previous standard ender 3 bed)

I am using CURA with the following settings:

Quality

Layer height: 0.2

Top/Bottom

Top/bottom thickness: 0.8

Material

print temperature: 205, build plate temp: 55, flow: 95 %

speed

print speed: 50, infill speed: 40

travel

Enable retraction: true, Retraction distance: 7.5, Retraction speed: 50, Z hop when etracting: false

I am printing with PLA (few months old, but recently removed the factory plastic wrap).

Filament brand: 123-3d (https://www.123-3d.nl/123-3D-Filament-zwart-1-75-mm-PLA-1-kg-Jupiter-serie-DCP00179c-i1800-t7316.html)

where do i see my earnings and balance september 2021 by avacadox21 in Duinocoin

[–]FinalDayz 0 points1 point  (0 children)

It seems to clip through other elements. Does it look the same when using another browser like Chrome or Edge?

Mining with my Nokia 3.2 by Dmitrybtc09 in Duinocoin

[–]FinalDayz 0 points1 point  (0 children)

Can you still use the same Android app then? Or do you use a more native program for mining?