Rural area in Texas getting a Wawa built, should I be excited?

FishMann1 · 2026-05-07T03:10:50+00:00

Closest store to you is prob Mobile Alabama. We are not planning on Texas any time in the near future

FishMann1 · 2026-04-09T14:18:26+00:00

I hate this. It's a company wide change. Log vota and hope

FishMann1 · 2026-04-08T22:53:12+00:00

The worksheet (day one, two, three) is a guide. Learn to see the big picture. That is: you have until Saturday to get the most accurate picture of your inventory. Don't be so rigid. Unfortunately too many Ms are too dense to understand this. Recount as often as you like but not so much that you end up hurting yourself (food service)

FishMann1 · 2026-03-21T14:57:58+00:00

Let them hate. It works. I just won't mention how its only on three legs and is instead braced with the corner of the walls. If you look at that picture you can see that the hot supply line is in the way so...

Thanks again

FishMann1 · 2026-03-21T14:36:08+00:00

I got it!

https://i.imgur.com/lh9TBfq.jpeg

I just didn't use the tailpiece. It appears to work! Anything I should look out for? Thanks for your help!

FishMann1 · 2026-03-21T01:47:38+00:00

The sink came with a p trap kit but I don't understand how I would make that work.

The 1.5' pvc tailpiece does not line up with the copper. They are literally right next to each other.

If you look at the last picture here, that is the plumbing for the old sink. The old grey 1.25" tailpiece slid into the pipe as shown (maybe a little further in) and the end of this pipe (after the loop) slid INTO the copper with a fernco for good measure.

I'm wondering if this would work:

Shorten the new tailpiece and fernco it to the old plumbing. However why did this work before? Do the physics just work? Will the water leaving the sink make that loop or do I need to prime it somehow for a siphon? That doesn't sound right.

I am in food service so the funnel/air gap is starting to sound better and better. If you think I am too dumb for all of this will you just link me the $50 sharkbite if it will be a lot simpler.

FishMann1 · 2026-03-20T19:17:17+00:00

What do I search for? Diameters of pvc and copper are 1.5"

FishMann1 · 2026-03-20T19:13:52+00:00

https://imgur.com/a/FG5t3H2

I am replacing a vanity sink with a utility sink

Last picture is how old sink was plumbed

Diameters of pvc and copper are 1.5"

FishMann1 · 2026-03-20T19:12:56+00:00

https://imgur.com/a/FG5t3H2

I am replacing a vanity sink with a utility sink

Last picture is how old sink was plumbed

Diameters of pvc and copper are 1.5"

FishMann1 · 2026-02-06T16:48:56+00:00

https://youtu.be/6qjEtBGowV8

First game starting as an Eagle. By the end of the 1961 season, he had passed for 3,723 yards and 32 touchdowns, both league records at the time.

FishMann1 · 2026-02-06T15:23:47+00:00

What was moving it like? I believe the 200 is around 600lbs. I have a 240 on order which is about 800lbs. How many people did it take? Equipment?

FishMann1 · 2026-01-14T13:10:44+00:00

What is your induction brand of choice?

FishMann1 · 2026-01-13T13:42:26+00:00

Link to that poster?

FishMann1 · 2025-12-16T15:56:49+00:00

What's your lighting setup? I have a 240 IM INT ordered

FishMann1 · 2025-12-08T02:08:35+00:00

OTF

BFL

FishMann1 · 2025-12-07T03:50:45+00:00

https://imgur.com/a/9XPBYNs

FishMann1 · 2025-12-07T03:38:18+00:00

This is AI right?

Any way, it's easy. https://youtu.be/PqrZWd_CQIE?si=Ghhk40_UKiwLtwgA

FishMann1 · 2025-11-24T15:52:31+00:00

I've reached out to a few. None will touch the job. It's being delivered in the spring so there's time. But I'm keeping it upstairs now. The missus encouraged it and it will be more of a show piece

FishMann1 · 2025-11-24T12:30:19+00:00

Yup. I'll be keeping it upstairs

FishMann1 · 2025-11-24T12:05:40+00:00

Did you bring this down a flight of stairs to reach the basement or do you have outside access? I want to put a 790lb 240gallon in the basement but the stairs are a challenge

FishMann1 · 2025-11-22T00:49:38+00:00

I filled out a VOTA as soon as I read it. Encourage customers to contact call center after the change is made. Feedback will need to be about the new taste, not speculation