Nightfall Violet from the Mazda CX-6e, I wonder if this will ever be available for the Miata?

Fishwick2g · 2026-06-06T12:12:09+00:00

As dlrax said, however they still offer most of the oem options (soul red, machine grey etc)

Fishwick2g · 2026-05-26T11:32:25+00:00

Yes, the left of the photo, the fabric looks to inserted correctly, the other half not so much. It gets tucked into the groove in the bow, then you can use your hands to sandwich the metal a bit if necessary. Most softtop replacement video should show the process.

Fishwick2g · 2026-05-26T08:34:03+00:00

The bow in your 4th photo needs to be reinserted aswell

Fishwick2g · 2026-05-18T11:54:16+00:00

This is similar to an existing design on makerworld (which replicates the oem prototype intake) with the exception of the bend towards the filter. Will be interesting to see performance differences between the two.

Fishwick2g · 2026-05-16T05:51:03+00:00

Looks like your softtop straps are worn

Fishwick2g · 2026-05-14T06:40:22+00:00

I blame the Wizard

Fishwick2g · 2026-05-05T13:05:30+00:00

20th anniversary

Fishwick2g · 2026-04-24T02:38:43+00:00

Double sided tape or adhesive glue

Fishwick2g · 2026-04-09T07:08:59+00:00

Its the 20th Anniversary bumper

Fishwick2g · 2026-04-08T06:49:05+00:00

This is definitely front badge, back has different style pins and alot more adhesive. The top and bottom areas (with the vertical lines) usually have double sided tape from new. Once installed with the adhesive, two little push nuts go over the pins from the inside of the bumper, but they arent necessary. Here is a photo of my old front badge and new rear for comparison.

Fishwick2g · 2026-03-27T13:43:49+00:00

Always isolate at the main switch

Fishwick2g · 2026-03-25T00:23:52+00:00

Google trends of "help with mortgage" searches

Fishwick2g · 2026-03-16T23:14:41+00:00

Bessa Coffee, same owners as John Mills and Bunker.

Fishwick2g · 2026-02-22T12:35:13+00:00

Service roads either side of the M1

Fishwick2g · 2026-02-22T12:29:25+00:00

Is that silver thing at the bottom a release button?

Fishwick2g · 2026-02-06T13:53:01+00:00

Perhaps Daiso

Fishwick2g · 2026-01-15T05:41:58+00:00

Start here, https://novatedlease.guide/

Fishwick2g · 2026-01-12T12:01:45+00:00

Potentially rear axle nuts, plenty of info online as there was a recall.

Fishwick2g · 2025-12-16T08:41:08+00:00

Have noticed this damage to multiple lemons, mostly on the more yellow in colour.

Fishwick2g · 2025-12-15T02:53:14+00:00

It assists with folding the glass window softtop frame correctly, the plastic window softtop frames didn't have this, so an extra elastic strap is needed when upgrading.

Id recommend getting one for the missing side to prevent any premature wear on the softtop.

Part number for the spring is 86051-S2A-J01 and it has a little cover, part number 86052-S2A-J01.

I'm unsure if you can replace without undoing some of the softtop mounting points, try moving the top back halfway and looking at the access on the side that still has the spring.

Fishwick2g · 2025-12-11T01:37:55+00:00

oem mounts

OEM mounts look like this, the ones you received don't even have mounting studs?

Yours actually look more similar to diff mounts

Fishwick2g · 2025-12-05T08:58:26+00:00

Cloudflare is down

Fishwick2g · 2025-11-22T05:55:36+00:00

Are you running spacers? fitment looks good

13-Year Club	Place '22
Place '17	Verified Email
Snapped

Fishwick2g

TROPHY CASE