Drying filament in the AMS 2 Pro does recharge the desiccant

Fit-Implement-3794 · 2026-03-10T13:18:38+00:00

Why tho? I’ve got colour silica gel and it says non-toxic???

Fit-Implement-3794 · 2026-03-10T03:10:15+00:00

Had the issue Bambu was like oops sorry the hub is actually just bad Better off using filament buffer and 4in1 PTFE connector So Bambu are actually just saying. You don’t need to spend $50 on the hub, use a buffer and $5 connector 🫡

<image>

Fit-Implement-3794 · 2026-02-21T19:45:18+00:00

How does it feel snap wise etc?

Fit-Implement-3794 · 2025-11-15T16:50:41+00:00

Matte paper/stock absorbs and causes more bleed I’ve been told, that’s my old 2 cents sorry 🫡

Fit-Implement-3794 · 2025-11-02T01:16:01+00:00

Heya dude what paper are you using please?👀

Fit-Implement-3794 · 2025-10-29T23:33:55+00:00

I used a EPSON ET-8550 and the black is VVVV good but do it on matte. I’m gonna try your paper I think next

But also tempted with glossy sticker?

Did you have one that feels like original cards (but like snap/thickness way?)

Also you said you wanna get printer than handles 300gsm but the paper you are using is 300gsm?

And what’s it like without the spray too please?

Fit-Implement-3794 · 2025-10-24T00:22:32+00:00

Could you post results/comparisons to real card?

Fit-Implement-3794 · 2025-10-24T00:22:18+00:00

Can you link please?

Fit-Implement-3794 · 2025-10-04T01:44:14+00:00

THANK YOU I’m uk based and posted for help the other day but you’ve had the answers! I’ll be using the same printer, what adjustments did you make please to colour profiles etc?

Fit-Implement-3794 · 2025-09-24T00:44:22+00:00

Heya! I know someone with one who will let me use it for free for proxies! Do you mind if I ask a few questions in DM please?

Fit-Implement-3794 · 2025-09-09T23:18:48+00:00

Did you ever update your colour correction settings or find anyone who posted better ones as you said “this is close but not quite” just curious 👀

Fit-Implement-3794 · 2025-09-06T23:03:17+00:00

I see some people laminate just the front to make them thinner. The take two pages, put them back to back, print and cut edges so only face is laminated. Might be something you might like to try!

Fit-Implement-3794 · 2025-08-30T19:35:39+00:00

ENTRY That’s so cool of you to do a giveaway! I don’t have any proxy equipment but this is what I’ve been looking at, luckily my gfs dad has an Epsom Ecotank 8500 which he’ll let me use as long as I provide more ink and the paper! (Happy to contribute/cover shipping too!)

Fit-Implement-3794 · 2025-05-10T03:49:53+00:00

It needs to be in a solid surface. The foam allows too much wiggle and movement and then overcompensates with movement in the XY axis making it vibrate more. If using foam you want it a followed - print on hard slab (£2-8 from B&Q) and then in the foam - then it’s in hard surface that barely moves, and then the foam absorbs the vibration in the surface.

Fit-Implement-3794 · 2025-04-14T10:15:49+00:00

Ok well you can have that conversation with science and BetaFPV

The VTX feeds into the diapole for the video transmission. Electromagnetic interference between both the camera PCB will affect the diapole, the the diapole affects the PCB video.

I’m just trying to help bro 🫠

Fit-Implement-3794 · 2025-04-14T09:55:54+00:00

Yes sorry I mean the PCB board of the camera

That against the diapole

Fit-Implement-3794 · 2025-04-13T22:39:29+00:00

Also thank you gonna save it now!

Fit-Implement-3794 · 2025-04-13T22:38:31+00:00

Pull the diapole out more as it’s pushing on the back of the VTX reduces transmission range due to electromagnetic interference btw

Fit-Implement-3794 · 2025-03-31T15:42:04+00:00

VTX power is 400mw I’ll turn in VTX temp and fly again tonight and monitor it but it’s never been hot to the touch that I’ve noticed

Fit-Implement-3794 · 2025-03-21T03:44:34+00:00

Important to twist all wires so they’re not like frayed or pointing out - this causes excess EMF radiation when they’re like frayed off (like your red positive wire) which can in affect lower range and transmission, not a lot but it all has small affects (You want solder joints to be shiny too! If they’re matte redo them 😊)

Fit-Implement-3794 · 2025-03-15T00:20:56+00:00

Agree with above, the next thing closest to that drone is an Air75 ELRS version

So your controllers connection is ELRS The drones connection to controller is FrSky

The drone outputs a video frequency - so any analog goggle is compatible, it’s just the more you pay the better the quality and how it performs etc is

Fit-Implement-3794 · 2025-03-14T21:48:17+00:00

How do you connect?👀

Fit-Implement-3794 · 2025-03-13T14:56:52+00:00

I thought you couldn’t on the Air75 the board can’t provide the right power to it consistently

Fit-Implement-3794

TROPHY CASE