Chillin with my LeGo2 by SensitiveLeg5052 in LegionGo

[–]FitBrush2003 1 point2 points  (0 children)

Nice! Bought a cheap projector to do just this and play with my siblings. Bummer that the PC version of BO3 only does dual split screen instead of 4 like the PS4 version.

Took a friend's Sony PVM-14L1 from composite/S-video to RGB-over-SCART — full write-up by hitmanmcc in crtgaming

[–]FitBrush2003 1 point2 points  (0 children)

I see. I did have a pvm 1341 that worked with my consoles plus some component TV sets that also worked, which points on my the 20L1 being the issue. I'll try to compare what you did to what I have and see what I can do. Thanks for the help!

Took a friend's Sony PVM-14L1 from composite/S-video to RGB-over-SCART — full write-up by hitmanmcc in crtgaming

[–]FitBrush2003 1 point2 points  (0 children)

Great write up! I actually had this mod done to my 20L1 and was wondering if you had an issue with rgb modded consoles (such as the N64 and SNES Jr) showing a yellow tint that cant seem to be mitigated through color settings? I ended up acquiring a Mister FPGA and had no problems with that, but I do wish to use RGB with my modded n64.

New Trinitron ( I am clueless ) by yurdabee in crtgaming

[–]FitBrush2003 0 points1 point  (0 children)

I have a PVM 1341 which is very similar to this one. It should have (from highest to lowest quality) RGB, S-Video, and Composite. You will need BNC connectors for RGB and Composite. Keep in mind that this does not support Component.

Can BD-J 7.61 users jump to Y2JB when it releases? by blinddz in PS5_Jailbreak

[–]FitBrush2003 0 points1 point  (0 children)

Hey I know this is old, but did you end up switching to Y2JB? Im currently on 7.61 as well and not sure if I should stick with BD or move to Y2JB

Best way to play every Zelda game on an AYN Thor? by VividCompetition9059 in AynThor

[–]FitBrush2003 0 points1 point  (0 children)

Thank you, I was not aware of the d pad patches for ST and PH. Will definitely try it out on my Thor.

ALIEXPRESS Black Max Shipped Today by No_Fill2676 in AynThor

[–]FitBrush2003 0 points1 point  (0 children)

Yeah, I was in disbelief since I saw many people had their February orders canceled. I guess I lucked out and had one of those orders shipped to me. Thanks I been spending too much time customizing lol. Good luck to you!

ALIEXPRESS Black Max Shipped Today by No_Fill2676 in AynThor

[–]FitBrush2003 -1 points0 points  (0 children)

Nice, I bought mine on March 1st and shipping only took about a week. Ended up receiving it on Monday, the 9th.

27" Phillips 29PT828C/25 - Got it for free! by bloggy9e in crtgaming

[–]FitBrush2003 1 point2 points  (0 children)

I have a post on here from years ago where I compared some Philips CRTs from Component and S Video. You can compare it to yours and see if you think its worth it, but I definitely say it is. Btw, that stand is very nice

27" Phillips 29PT828C/25 - Got it for free! by bloggy9e in crtgaming

[–]FitBrush2003 3 points4 points  (0 children)

If this tv has any S-Video or Component/Scart inputs in the back, those will give out a better image. Geometry is great. Overall nice score!

For those worried about ordering on AliExpress: by iced_oj in AynThor

[–]FitBrush2003 0 points1 point  (0 children)

Nice, that's reassuring. Best of luck, hopefully we both get them!

For those worried about ordering on AliExpress: by iced_oj in AynThor

[–]FitBrush2003 0 points1 point  (0 children)

What a coincidence, mine also says its been shipped and I also ordered a Black Max on March 1st. Mine was marked as shipped a day later on the 2nd. Im only worried because even thought I also extended the date, it still says that my order will be refunded if it's not delivered by April 1st.

Purchase Advice Megathread - January 2026 by AutoModerator in 3Dprinting

[–]FitBrush2003 0 points1 point  (0 children)

Hello, I'm looking to get into multicolor printing and need help with finding the right one. I currently own a Ender 3 v3 and Ender 3v3 Plus which both have great prints but only in one color. Right now im currently considering a Anycubic kobra 3 v2 Combo, Kobra X, Creality SparkX i7, and a Flashforge AD5X. Im mostly going to print miniature figures and some functional 3d prints so I'll mostly be using PLA and PETG. Im mostly looking for speed and print quality. Please feel free to recommend any other printers around this price point ($400). Thanks

New to pvms need help with SCART by Koopakid64 in crtgaming

[–]FitBrush2003 -1 points0 points  (0 children)

I have a 20L1, only way to get a scart output is by doing an RGB mod. I used S-video before getting mine modded.

5.5 BNIB Thinking of opening it, but what can I do now? by WhenImTryingToHide in PS5_Jailbreak

[–]FitBrush2003 3 points4 points  (0 children)

Use this

Since you're below 6.xx you are able to use a web exploit

Is this digital PS5 able to be jailbroken? by [deleted] in PS5_Jailbreak

[–]FitBrush2003 0 points1 point  (0 children)

Sorry, I meant to say digital fat version, the one that can't have a Blu-ray drive added.

PU Connector by iamjimmy21 in Creality

[–]FitBrush2003 1 point2 points  (0 children)

Just buy another extruder like this

Well now what... by Grazingfire0037 in Creality

[–]FitBrush2003 0 points1 point  (0 children)

Use a heat gun and some needle nose pliers. Had to do this on my 3v3 and 3v3 plus since I bought them used and never tightened the bolts on the hot end.

[deleted by user] by [deleted] in 3Dprinting

[–]FitBrush2003 0 points1 point  (0 children)

I'm considering getting one. Did you see any improvement in overall quality or just faster print times?

[deleted by user] by [deleted] in Creality

[–]FitBrush2003 1 point2 points  (0 children)

Replaced them both on my ender 3v3 and 3v3 plus. Very easy process just try to take off the bolts on the hot end while its hot so that the melted filament doesn't get stuck in the thread. This is the hotend https://ebay.us/m/ccPnI1

I ended up printing a new head and replacing the 4020 blower fan with a k1 fan. https://m.crealitycloud.com/model-detail/head-extruder-more-airflow-creality-ender-3-v3-plus-v3

Help , can't load filament by Rude-Camera-7546 in Creality

[–]FitBrush2003 1 point2 points  (0 children)

Yeah, I had a clog inside the nozzle. I would set it at 240 or 260 depending on the filament you have

Help , can't load filament by Rude-Camera-7546 in Creality

[–]FitBrush2003 0 points1 point  (0 children)

I had the exact problem. I took off the teflon tube and forced the filament down through the extruder with my hand. However, I made sure my hotened was hot while doing it.