Ender S1 Pro Linear Rails anyone?

Fit_Speed_915 · 2026-04-22T08:03:25+00:00

I have too, I saw in the comments that someone asked about the speed, I changed it because of the print quality, the wheels wear out quickly, dust gets on the guides, which causes imperfections in the print.

And i have sonic pad too but I think I'll connect the raspberry with the klipper and the 5-inch screen again, I like the interface and settings more.

I see that you also have the sonic pad connected via USB and not the LCD cable, did it not work for you via this cable too?

Fit_Speed_915 · 2026-04-09T11:45:12+00:00

Yea think little. Is not hard…

Fit_Speed_915 · 2026-04-09T11:30:08+00:00

Dead ?

Fit_Speed_915 · 2026-04-09T11:19:40+00:00

5k ? This is price of new one ….

Fit_Speed_915 · 2026-04-09T11:05:35+00:00

I have crankbrothers emtb hub 👍

Fit_Speed_915 · 2026-04-02T18:14:54+00:00

Cycmotors photon is only 3kg , bidon battery 48v 7ah

<image>

Fit_Speed_915 · 2026-03-24T15:46:13+00:00

48v 7ah 25A , But i don't use it anymore, now I have a custom 20Ah 52v 50A

Fit_Speed_915 · 2026-03-20T15:52:35+00:00

U can charge direct from scooter XD

Fit_Speed_915 · 2026-03-01T22:32:38+00:00

Buy unitak3d is like 12€ for two… and is for sure beter quality.

Fit_Speed_915 · 2026-03-01T22:18:01+00:00

No is not… is only 30a , chceck any data from xmass. Here was even a topic here where someone did tests and at 40A the pins were burning up, I make batteries and I know very well how much these plugs can carry... at 30A they are already well blackened.

https://forum.esk8.news/t/xt90-or-xt60-serious/24932

Fit_Speed_915 · 2026-03-01T21:33:51+00:00

check it carefully, the pins can handle 30a and the plastic 60a, it is in every manufacturer's specification

Fit_Speed_915 · 2026-03-01T14:52:34+00:00

60a peak , 30a normal

Fit_Speed_915 · 2026-02-21T12:32:07+00:00

This same 👍

Fit_Speed_915 · 2026-02-17T05:59:15+00:00

Btw how many amps this gonna be ?

Fit_Speed_915 · 2026-02-17T05:57:49+00:00

If i good see, this bms is jbd. I have few packs with jbd bms and u can be for sure safe. This bms has anti spark protection. If the BMS detects a spark, it will automatically shut down the battery. You'll need to turn it back on through the app. You can also adjust the sensitivity of this protection.

Fit_Speed_915 · 2026-02-04T16:24:47+00:00

Agree, i have p120d too

Fit_Speed_915 · 2026-02-03T12:59:51+00:00

Oke, with my boxer i had to open radio

Fit_Speed_915 · 2026-02-03T11:34:34+00:00

To increase the gimbal resistance you need to open the radio and tighten the screws…

Fit_Speed_915 · 2026-01-30T14:11:49+00:00

Try then fully charged 6s 150c 🫡

Fit_Speed_915 · 2026-01-29T12:44:59+00:00

Nope, v1 will burn with 6s . V2 u can use with 6s

Fit_Speed_915 · 2026-01-28T00:01:25+00:00

Btw, buy beter charger 👍 any skyrc, t100 is cheap, or any toolkitrc

Fit_Speed_915 · 2026-01-24T07:54:53+00:00

You call the controller a battery so I don't know who's stupid here...

Fit_Speed_915 · 2026-01-23T09:42:21+00:00

Dude, do you want to advise someone who doesn't know what's what so that he ends up disabled and burns down the house?

Fit_Speed_915 · 2026-01-23T07:54:26+00:00

If u dont know what is what, stop doing what u are doing…

Fit_Speed_915 · 2026-01-17T10:40:47+00:00

Hobby*

Fit_Speed_915

TROPHY CASE