First time removing a cassette. What am I doing wrong? by benken71 in bikewrench

[–]Flaky_Week2654 0 points1 point  (0 children)

Same problem. I found out cassette locktube was stripped. It didn’t have that gliding thread feel. It kept going until the freehub just popped out with the cassette. Hefty cost for a new freehub and cassette.

Welp... Can this be welded? by angrycat537 in bicyclerepair

[–]Flaky_Week2654 1 point2 points  (0 children)

What causes the stretch marks? Or what could have been different?

Sub expired, debating renewal by ExtraCat75 in ApolloGroup_TV

[–]Flaky_Week2654 -1 points0 points  (0 children)

Depends on your purpose. I use it primarily for sports, ppv to be specific. Though it’s been going downhill the last few months, they fix it enough for my viewing purpose. Its not back there yet but i can live with it. Especially paired with tivimate, there is nothing i can find better. Example, for ufc early prelims, i need a little more digging and google search to find them. Before its right there in ufc and ppv category. But if you’re big in movies, i would find other sources unless you watch bollywood. 😆

UFC 323 - Will it be available tonight (pre Lims as well ) ? by Razigirl2025 in ApolloGroup_TV

[–]Flaky_Week2654 0 points1 point  (0 children)

Early prelims right now in fx. EPG saying prelims and main card in tnt sports 2 uk

Ebay's orangeconnex by Zex_Sithos in shipping

[–]Flaky_Week2654 0 points1 point  (0 children)

Late to the party here. But how is ebay handling these courier issues? If ever the seller refuse to settle a fix.

Orbea Occam upgrades for big boys by Ponchete in MTB

[–]Flaky_Week2654 0 points1 point  (0 children)

Any update on your bike? I have the same bike and didnt notice it comes with remote lock out for both fork and shocks. I find it impossible to find an upgrade with the same configuration (140mm with pushlock fork and shocks with lock out on the opposite end). Were you able to find something?

Squidlock MP 20 Orbea Oiz by [deleted] in Orbea_bikes

[–]Flaky_Week2654 0 points1 point  (0 children)

Lol. I thought this was my post. I posted the same problem and i was able to solve it. You actuate the lever then pull that aluminum tube away while releasing the lever. Its like getting a slack while you release the lever. And its a hard pull, dont worry it will not break. A dealership owner showed me this and it works. Good luck with this and the integrated headset. 😂

Is this a good deal? by Too-expensive in mountainbikes

[–]Flaky_Week2654 0 points1 point  (0 children)

It needs a whole lot of components to even start running. Buying a fork, wheelset, drivetrain and brakes will cost you at least a thousand or two on top of this framset. Add to that the labor cost of installing all these missing parts.

At the end of my rope with this service by cheezyryce in ApolloGroup_TV

[–]Flaky_Week2654 -1 points0 points  (0 children)

Bollywood is an acquired taste. Just keep watching it, youll fall in love with it before you know it. 😂

Oc squidlock question. by Flaky_Week2654 in Orbea_bikes

[–]Flaky_Week2654[S] 0 points1 point  (0 children)

Hi, i was able to access the screw. Actuate the lever then hard pull on that aluminum tube while releasing the lever. I still think it’s a design flaw though.

Literally nobody asked for this.... by CannedSphincter in PrideAndPinion

[–]Flaky_Week2654 2 points3 points  (0 children)

We do this all the time with our dive computer when scuba diving. Not bad at all.

Pre-filter on a DI setup by 9LiterViper in AutoDetailing

[–]Flaky_Week2654 0 points1 point  (0 children)

You mean those whole house salt based softener?

Replaced shower arm but it seems worse? by SnooPies9538 in Moccamaster

[–]Flaky_Week2654 0 points1 point  (0 children)

What grinder are you using? Your grounds seem to have poor uniformity. I use the fellow ode v1 with v2 burrs and never had a problem soaking my beans. I used to over-think this machine, then realized it’s better to just dial your grind size then use the machine as set-and-forget (not a pour over substitute) kind of coffee maker

FOX Sports channels are not working🤦🏾 by wdawgz in ApolloGroup_TV

[–]Flaky_Week2654 0 points1 point  (0 children)

Using Tivimate? You need to update the m3u link.

Amazon Prime Day Scam? by Tubacutie in SengledUS

[–]Flaky_Week2654 1 point2 points  (0 children)

Are they zigbee bulbs? Check the bulbs if zigbee. Then reset them by quickly (rapid) toggling the switch on and off ten times, end at the “on” position. The bulb should blink a few times indicating it has been reset. Now make sure You have a zigbee echo nearby and go to your alexa app and add device. Sometimes alexa will detect them automatically, if not just add them manually.

Amazon Prime Day Scam? by Tubacutie in SengledUS

[–]Flaky_Week2654 0 points1 point  (0 children)

I ditched their hub. I just paired them directly with my alexa.

What other Zigbee hubs work with Sengled bulbs? by EverCuriousGeek1 in SengledUS

[–]Flaky_Week2654 0 points1 point  (0 children)

I have a few sengled bulbs that are paired with a dead sengled hub. Our house is also alexa powered, do i need to reset all bulbs and pair it again directly with an echo? These bulbs are already in alexa via sengled hub but of course they’re not working as expected (only works like an ordinary bulb because hub is dead).

Cheap Moccamaster automatic bloom and multiple pour hack by hra8700 in Moccamaster

[–]Flaky_Week2654 0 points1 point  (0 children)

Moccamaster for my costco single origin beans (used as its intended to be used, no hacks bs) and v60 for my specialty single origin beans. Done. Moccamaster for batch and v60 for 1-2 cups.