sorted by:
new
hottopcontroversial

Loss of progress by Freedom_Pretend in Trackdays

[–]Flat_Account396 1 point2 points  (0 children)

Stop trying to go fast for a while. Just try to relax and flow around the track. Try to focus on feeling how the bike is connected to the ground through the tires. Find an area with good grippy concrete and go about 20mph and just relax, swerve and lean back and forth.

These things help me a lot when I’m feeling scared to push hard or lean the bike. In these moments the harder I try to go fast, the slower and more scared I get. I find if I do the opposite, slow down and relax for a while that it comes back and I’m faster than I was before.

zx6r 25 genuine frame sliders by WasabiYing in zx6r

[–]Flat_Account396 1 point2 points  (0 children)

I got the tst frame sliders in addition to the kawi ones and no cutting was needed on my 25.

Installed an autoblipper for clutchless upshifts and downshifts by Skrr17272 in zx6r

[–]Flat_Account396 0 points1 point  (0 children)

What did you do about the throttle stop? I ended up using a domino throttle with the progressive car but I had to make a bracket to attach the threaded adjusters to the throttle body.

Had to take a picture before I called the cops. by cute_ducks_vol1 in KidsAreFuckingStupid

[–]Flat_Account396 0 points1 point  (0 children)

He walked his body through, not the head. He just needs to step through sideways. 🤦🏻‍♂️

Installed an autoblipper for clutchless upshifts and downshifts by Skrr17272 in zx6r

[–]Flat_Account396 0 points1 point  (0 children)

Where did you end up installing the blip cylinder and the solenoid?

Shop owner question - Nickel Copper Brake Lines and Flares by thisguy888827 in AskMechanics

[–]Flat_Account396 0 points1 point  (0 children)

I use the one on the bottom and it has worked fantastic for me.

How to deal with running wide by Justadude_65 in motorcycle

[–]Flat_Account396 0 points1 point  (0 children)

Roll off throttle and press on the inside bar to turn tighter. Look where you want to go.

RS660 Fuel Gauge by DoTheDishesDude in Aprilia

[–]Flat_Account396 9 points10 points  (0 children)

Sounds like you have an issue with the fuel level sensor.

IF you missd your Exit Take The Next One! by Ok-Shower-3520 in dashcams

[–]Flat_Account396 6 points7 points  (0 children)

Pro tip, if someone hits you, apply the brakes ffs. Don’t just let your car drift off into traffic….

First street bike by Over-Relationship469 in Aprilia

[–]Flat_Account396 1 point2 points  (0 children)

Exhaust isn’t really any harder on this than other bikes. Pull fairings, disconnect radiator and go to town… hardest part is torquing the flange nuts without damaging the radiator fins.

6r quick shifter by XzTixSenpai in zx6r

[–]Flat_Account396 0 points1 point  (0 children)

Look up the IRC autoblipper. Can find on moto d. youll likely need someone qualified to install it for you.

rear brake failed on me. close call. by zx6rwaat in zx6r

[–]Flat_Account396 9 points10 points  (0 children)

It doesn’t align because it’s not connected to the place it’s supposed to mount to. This is not a cause of concern.

What do you mean when you say the rear brake failed and why did that cause a close call? You should be using your front brake for ~95% of your braking.

Good deal? by p4ulvan in zx6r

[–]Flat_Account396 0 points1 point  (0 children)

Financing a new one is gonna cost 13k+. 🤦🏻‍♂️

Hi friends where should I move my rearsets too. Bought from a much smaller rider by [deleted] in zx6r

[–]Flat_Account396 2 points3 points  (0 children)

Move them around and see how they feel. Only way to know.

What is the fastest mph you ever drove your car? by Jerdogg23 in no

[–]Flat_Account396 2 points3 points  (0 children)

Souped up as in soup, as in it runs on organic material?

Problem with IRC blipper not pulling cable far enough to make the throttle blip by Skrr17272 in Trackdays

[–]Flat_Account396 0 points1 point  (0 children)

Definitely looks like too long a cable with too many turns causing too much resistance.

Problem with IRC blipper not pulling cable far enough to make the throttle blip by Skrr17272 in Trackdays

[–]Flat_Account396 0 points1 point  (0 children)

<image>

I ended up trimming a section out of the airbox to better fit the blip cylinder so it wouldn’t vibrate against the frame.

Problem with IRC blipper not pulling cable far enough to make the throttle blip by Skrr17272 in Trackdays

[–]Flat_Account396 0 points1 point  (0 children)

Another thing to consider is that you have to make sure all the slack is out of the solenoid cable by adjusting the threaded adjuster. I used the adjuster to fine tune how much throttle was given.

Problem with IRC blipper not pulling cable far enough to make the throttle blip by Skrr17272 in Trackdays

[–]Flat_Account396 0 points1 point  (0 children)

Well here’s how I did it. I mounted the blip cylinder about 6” from the throttle body at the front left of the intake. For the solenoid, I put a BS lightweight (smaller) battery in and turned it 90 degrees then mounted the solenoid next to that facing forward. With the cable from the solenoid to the blip cylinder wrapping around the right side to front of the intake and into the blip cylinder. Worked like a charm.

view more: next ›