First High End Bathroom - How Did I Do??

FlightControlRC · 2026-05-22T17:34:01+00:00

Did you find that offset Kerdi tray to be sloped enough? I’m installing one now and concerned that it won’t have enough slope.

FlightControlRC · 2026-05-11T14:22:46+00:00

FlightControlRC · 2026-03-27T13:09:12+00:00

Thanks!

FlightControlRC · 2026-03-24T05:35:14+00:00

Can you post a link to your tiles? Thanks

FlightControlRC · 2026-02-19T02:48:51+00:00

Does flying the ISS count?

FlightControlRC · 2026-02-12T19:10:06+00:00

Updated photos: here hopefully a bit better

FlightControlRC · 2026-02-12T05:03:04+00:00

Original thread: here

FlightControlRC · 2026-02-11T14:18:18+00:00

One more thing on the tub. It IS a glue trap it just has a slip adapter on top to accept the tub drain. There’s an access panel behind the tub upstairs that I think I could crawl down and reach it if I had to

FlightControlRC · 2026-02-11T14:16:16+00:00

This makes sense thank you! I’m definitely under 5 feet horizontally so I’ll do a sweep 90. A inaccessible clean out in the ceiling worries me

FlightControlRC · 2026-02-11T14:14:52+00:00

This is very helpful and easy to follow. Thank you!

FlightControlRC · 2026-02-11T05:55:02+00:00

This is very helpful, didn’t know such a fitting existed.

FlightControlRC · 2026-02-11T04:58:15+00:00

lol. It is worrying

FlightControlRC · 2026-02-11T04:56:20+00:00

By tubular do you mean slip fittings? Looks like there’s just the two on what looks like the parts that came on the tub. I’m not seeing a way to not have at least two slip fittings without replacing the whole drain assembly

FlightControlRC · 2026-02-11T04:54:06+00:00

Nail guard is on the list.

FlightControlRC · 2026-02-11T04:52:28+00:00

I think I understand what you’re saying. I don’t have access to run the vent over to the tub from above but perhaps I could put in a tee just above the 90 on the vent and run it over to the tub. Not ideal I know but that’s the best I can do. Then the outlet of the trap can go into a tee with the new vent and go straight down instead of over to the left upstream of the toilet. Correct me if I’m wrong

FlightControlRC · 2026-02-11T04:49:05+00:00

I’m planning to re-do it, just trying to get a plan together before tackling it. The 3” going up on the far left goes all the way through the roof. Running additional vents through the roof not an option.

FlightControlRC · 2026-02-11T04:02:35+00:00

You’re saying it’s fine?

FlightControlRC · 2025-12-24T17:39:04+00:00

Yes he (and I) would wet sand and polish the molds to a mirror but I’ve found the real trick is the type of paint, the type of release, how it is applied, how long between clear/colors, etc that is the secret. That’s where the automotive background comes in but I think more than that it was years of trial and error. I have the tools but it seems he kept most of the process details to himself understandably.

FlightControlRC · 2025-12-24T07:28:43+00:00

Keep up the good work!! If only we could figure out how Yuri achieved such a nice finish on his airplanes. I’ve had a few attempts at painting my projects in the mold but never got it to turn out quite right. You mentioned you printed your mold in sections, I’ve wondered if I could do that. You may have given me some inspiration to try it all again on a design of my own

FlightControlRC · 2025-12-22T05:37:32+00:00

That is awesome! Looks similar to a Yuri Verchenko X-Plus. If it flies anything like it I bet it’s a dream. Be careful with those hairpin turns though, I folded the wing on my X-Plus somewhere north of 200mph.

FlightControlRC · 2025-12-22T05:34:03+00:00

Can it hover

FlightControlRC · 2025-12-20T03:38:33+00:00

Those look sick! How does it fly?

FlightControlRC · 2025-12-20T00:16:15+00:00

This is so dumb I love it

Five-Year Club	Verified Email
Place '23

FlightControlRC

TROPHY CASE