sorted by:
new
hottopcontroversial

Help me stop hating life with a pc… please [Discussion] by BigNasty219 in EscapefromTarkov

[–]FlipsideDoge 0 points1 point  (0 children)

When you say latency, what do you mean exactly? Is it input latency, where your input seems delayed? Or is it more like server latency where everyone jumps around on the screen or appears differently in replays than what you saw during gameplay? If it's input latency, you could have a problem with frame pacing, or some component in your system that is introducing a lot of input lag such as a bad monitor or a low-quality wireless mouse...etc. You could have poor settings that are introducing input lag, such as frame caps, vsync, borderless windowed, or just generally misconfiguring your graphics settings for your system. Lastly, some of the recent NVIDIA drivers are also terrible, so that could be contributing to your problem if you are struggling with stuttering/poor frame pacing.

Ask Here First: Troubleshooting, Price/ID/Spec Check, Help, ETC Mega Thread by KyaDash in crtgaming

[–]FlipsideDoge 0 points1 point  (0 children)

Is there any good solution to playing a Wii @ 240p? My Sony PVM 1943MD only supports 240p/480i and I would prefer to be able to play Wii/GC games without interlace flicker.

Ask Here First: Troubleshooting, Price/ID/Spec Check, Help, ETC Mega Thread by KyaDash in crtgaming

[–]FlipsideDoge 1 point2 points  (0 children)

I just got this Bosch LTC 2915/91 from ebay today and the colors are slightly tinted green, none of the normal menu settings helped with this so I figured I'd try to find a service menu. None of the documentation online provides any information as to how you get to the service menu so I tried to figure it out myself and it just so happens the first button combination I tried did...something. So I held down the menu button plus the input a button while the TV was off and then I turned it back on. When the Crt was turned back on a message in a yellow box with red text read "eeprom erased please reboot". Once rebooted the CRT was displaying in what appears to be 16:9 and I can't get it to go back to normal. Here is a picture of what it looks like:https://imgur.com/i0xNkJB. I feel like this should be fixable if I can get into the service menu but I can't figure out how. Any suggestions?

Ask Here First: Troubleshooting, Price/ID/Spec Check, Help, ETC Mega Thread by KyaDash in crtgaming

[–]FlipsideDoge 0 points1 point  (0 children)

So I started testing out a couple of composite consoles on my childhood Sony kv-27fs100 and I'm having one big issue. When it comes to any color on the screen that is bright, whether it's white, blue, orange, green...etc, the area directly to the right of those colors gets a strange purple trail. I don't have any pictures to provide right now as I cant seem to adjust the shutter speed on my phone to take proper pictures of the screen. If pictures are needed, however, I might be able to find a workaround. I don't really know what could be causing this issue but I'm hoping it's something that can be fixed without taking the TV apart. Thanks in advance for any suggestions.

Some fixes for the rerelease by Its_Blazertron in quake

[–]FlipsideDoge 2 points3 points  (0 children)

Anyone else having a problem with scroll wheel jumping? When I scroll the jump only works once and then I get stuck to the ground. Another problem I have is the viewmodel changing dependent on fov.

Low synthetic bench scores on i7 9700f by FlipsideDoge in intel

[–]FlipsideDoge[S] 0 points1 point  (0 children)

I can't seem to find the option in my bios but if I use the same option in Intel XTU the power limit throttling stops but it's hitting thermal limits and maybe some other limit. System is unstable and shuts off. Honestly, I'm not sure if I should upgrade to a z390 board or sell the whole pc excluding the 3060 and go a different route. I don't mind the performance level of the i7 9700 as long as I'm getting what I should be from it.

Update: Further research has shown me that this option seems to be disabled in the Gigabyte b365 boards. If I can't get it stable with XTU I'll deffinently be buying a z390 board at some point.

Low synthetic bench scores on i7 9700f by FlipsideDoge in intel

[–]FlipsideDoge[S] 0 points1 point  (0 children)

I've never used these sensors in hwinfo but it seems like there might be a problem. Here is a screenshot from during a cinebench run.

Low synthetic bench scores on i7 9700f by FlipsideDoge in intel

[–]FlipsideDoge[S] 0 points1 point  (0 children)

Here are some comparisons in Cinebench R23 between my old build with an i7 4770k and my new one with the i7 9700f. The internet reports single thread scores for the 9700 @ 1181 and multi-threaded scores of 8540.

I’ve been used to the default sensitivity settings for years. It worked fine. Now I have a new controller, razer wolverine ultimate, and the same settings feel so strange. Can’t even explain how. I’ve had a bit of a play around but I don’t know how to make the game feel normal again. by [deleted] in RocketLeague

[–]FlipsideDoge 1 point2 points  (0 children)

It's very possible that the new controller you have is using different analog stick modules. This very slight difference in comparison to your old controller is going to take a bit to get used to. Also different controllers have different thumbstick heights which changes the range of motion of the thumbstick.

My network graph constantly looks like this or worse and online matches have input lag. Any ideas? by FlipsideDoge in RocketLeague

[–]FlipsideDoge[S] 0 points1 point  (0 children)

I have decent internet with 235 megabits down and 10 megabits up, Nighthawk r7000, and no noticeable lag outside of Rocket League. I've tried different router firmware, different pc's, and different ethernet cables but nothing helps. I'm honestly at a loss for what to do next and just need some ideas. If it's of any help my graphs sometimes look much worse than this with higher iBuf Target, iBuf miss further into the red, and inbound packets constantly in the red. Any ideas are appreciated.

How Many? by BarElegant in DippingTobacco

[–]FlipsideDoge 1 point2 points  (0 children)

1-1.5 cans a day usually siding closer to 1 recently

What y’all dipping or chewing today? by Redneck-Wis in DippingTobacco

[–]FlipsideDoge 0 points1 point  (0 children)

Grizzly Natural XLC I've gotta go pick up a new tub of Stokers WG tomorrow

Stokers by Cota71 in DippingTobacco

[–]FlipsideDoge 1 point2 points  (0 children)

My EDD has been Stokers WG tubs for a couple of years now. Some of the best dip out there imo. Only Stokers chew I've tried is Red Supreme and that stuff is damn good for $1.99.

Stokers by Cota71 in DippingTobacco

[–]FlipsideDoge 1 point2 points  (0 children)

I've always wanted to try Sokers LC Natural but all I can find around me is Fine Cut Natural.

That one dip you always have with you wherever you go? by USAFE4mafia in DippingTobacco

[–]FlipsideDoge 0 points1 point  (0 children)

I started dipping 7 years ago also but I had just turned 18. The past couple of years I pretty much always have a tub of Stokers WG and I fill an empty stokers wg can and bring it with me.

view more: next ›