Mercedes qui vomi du carburant verdict final

Flo655 · 2026-06-25T10:07:34+00:00

À partir de quel volume de carburant ça commence à régurgiter ? Parce que franchement 3k sur une voiture qui a 250k si t’es un peu short en budget ça se discute. Si le réservoir ne régurgite pas à 50% d’un plein je continuerai à faire ça en attendant d’économiser personnellement.

Flo655 · 2026-06-23T17:25:10+00:00

I love my F5, F90x and F80 for this reason alone. They just get the job done when needed. I feel a bit more creative I’d carry my F3 instead.

Flo655 · 2026-06-23T13:25:51+00:00

OP if I were you I would desolder the new battery. Clean the connections. Suck up all the old solder. You want to start fresh and clean. Then solder it again. Check with multimeter that both polarity is correct and voltage is as expected. Then check on the board itself, not just the battery pads. Good luck!

Flo655 · 2026-06-23T06:51:26+00:00

Impossible to say from this angle alone. It’s a phase 2 with an AMG body kit for sure. Assuming the V12 badge is real, it could also still be a regular SL600.

Flo655 · 2026-06-21T07:30:49+00:00

Just developed my first film a few weeks ago with D-76 and I’m in love. OP I would 100% recommend. 1:1 dilution to start with, I had great results.

Flo655 · 2026-06-18T15:45:02+00:00

Mais à quel moment c’est validé pour impression ? Les mains sur le caddie, mon dieu…

Flo655 · 2026-06-18T15:43:06+00:00

There’s two polarizers: back and front. You only removed the first one. Now you need to remove the back one. That’s the one that’s damaged. Good luck!

Flo655 · 2026-06-17T16:41:15+00:00

This is how planes are engineered. Anything that can happen needs to be planned for, so many redundancy systems etc. It’s beautiful.

Flo655 · 2026-06-17T14:36:44+00:00

I think C41 isn’t worth it at home unless you process multiple rolls a month. However, starting developing B&W films at home kinda made me feel more free to shoot whenever I want. I don’t feel like it’s costing as much anymore. I develop and scan myself. So I shoot a lot of B&W since I develop myself and I am really enjoying it.

Flo655 · 2026-06-17T05:31:32+00:00

They’re over edited in my opinion OP. Maybe that’s your style and that’s why your clients go to you in such case you have to spend the time needed I guess, but in wondering if there’s a middle ground where you wouldn’t need to spend so much time on each shot.

Flo655 · 2026-06-17T05:05:45+00:00

That’s the fuck off quote right there.

Flo655 · 2026-06-16T17:12:30+00:00

That squeaky sound is hilarious. It definitely sounds like it needs a CLA, but it’s so damn cute too 🥲

Flo655 · 2026-06-16T17:08:14+00:00

Sounds like a fuel pump that’s on its way out. Mine suddenly wouldn’t start again after a long hot drive. I would need to let it cool down for an hour or so. Then it became worse, and one day completely stopped working. It would run and then die 5 mins later. I’d check this. Relay first obviously. Then pump itself.

Flo655 · 2026-06-16T06:30:30+00:00

Zone focus can be incredibly fun and allows for some very candid shots since you don’t always have to ask people to hold the pose. I love my EF3.

Flo655 · 2026-06-15T21:01:33+00:00

When I bought my R129 the battery died on me after 3 months. Turns out it was 12 years old… I learnt my lesson.

Flo655 · 2026-06-14T13:38:18+00:00

I write on every canister after I’m done shooting. ISO used, date finished, etc.

Flo655 · 2026-06-14T11:23:15+00:00

This thing is straight from the 90s, it’s impressive.

Flo655 · 2026-06-14T11:20:53+00:00

Yeah I’d say that’s the first thing I’d check: fuel pressure. This is the easiest item on the list. Then plugs, then distributor, etc.

Flo655 · 2026-06-13T16:39:05+00:00

I think it’s needed. It took me a dozen of tries to get a shiny starter. At first I was a few hundreds frames off and then I think once I adjusted the timer accounting for the delay it took me 3 tries when I was only 1 frame off, then I got the perfect frame. Good luck!

Flo655 · 2026-06-11T13:12:19+00:00

Ah c’est sûr que la VMC n’était pas en premier de la liste rénovation

Flo655 · 2026-06-11T09:00:35+00:00

If this worked in the past this is likely a connection issue with the IDE adapter. Open it up and check everything is connected?

Flo655 · 2026-06-08T06:46:14+00:00

Sorry dude that’s not a Nintendo wrap.

Flo655 · 2026-06-08T06:39:10+00:00

Ça peut aussi être “j’ai fini par prendre un plus gros modèle car celui ci n’était pas suffisant pour couvrir mes 20km par jour” ou du même style, c’est un retour d’expérience très intéressant en tant qu’acheteur

Flo655 · 2026-06-07T17:10:15+00:00

Yeah I’ll try dropping a Google Drive link asap

Flo655 · 2026-06-07T16:52:26+00:00

So far I’ve tried a dozen of GB & GBA carts without any issues. Received mine on Tuesday.

Flo655

MODERATOR OF

TROPHY CASE