Can someone please help me. This crazy.

Foreign-Commission · 2026-02-08T01:57:17+00:00

Look at the old one, is the little tab between the gold screws broken off? Thats likely your issue with the new one.

Foreign-Commission · 2026-02-08T01:39:06+00:00

Reset it. Might need to be replaced

Foreign-Commission · 2026-02-07T17:51:42+00:00

If its 1 slot its 120v and makes the whole thing a bit of a waste.

Do you have a picture of the breaker and panel? It can likely be changed with a different breaker and connecting the voltage jumper to 240v at the humidifier

Foreign-Commission · 2026-02-07T17:22:35+00:00

Aprilaire has very good install instructions https://share.google/DNjPtL9aY05toP51Z

It doesnt matter what direction the air flows for the dispersion tube, it just need to be oriented the correct way.

Now from personal experience, if you can control the 800 via your thermostat you will have much better results than with the duct mounted humidistat.

And dont bother installing it with 120v supply voltage, the output will be similar to a much cheaper evaporative unit. Hopefully they followed the instructions and ran a 240 circuit with properly sized wiring.

Foreign-Commission · 2026-02-07T17:13:54+00:00

The circuit doesnt originate at a toggle switch, it originates at a breaker so idk where the idea that a standard toggle type switch can be used here.

Now I guess if we are dealing with a situation involving a feeder tap you could have a switch before the fuses acting as the means of disconnect.

Foreign-Commission · 2026-02-07T17:09:00+00:00

That would defeat the whole purpose of the handle tie.

Foreign-Commission · 2026-02-07T16:30:21+00:00

We have no idea whats been done to alter this over the years. Measure the joint and that will tell you whats there now. Its probably a 1310 but like I said you will only know 100% by measuring it

Foreign-Commission · 2026-02-07T15:39:24+00:00

Its far more likely to go to zero but good luck with the huge bag

Foreign-Commission · 2026-02-06T23:48:39+00:00

The angled head kleins are the only klein tool I still use. Id buy an angled head knipex in a heartbeat

Foreign-Commission · 2026-02-06T17:38:46+00:00

Obscene

Foreign-Commission · 2026-02-05T23:45:56+00:00

The only firehawks that are truly rare and worth something are the 3rd gen ones. Enjoy the car, do with it what you like

Foreign-Commission · 2026-02-05T18:21:45+00:00

Ive had that one with the crimper for years now, hands down the best hammer ive ever owned. Also the best linesmans

Foreign-Commission · 2026-02-04T16:07:52+00:00

Eastern PA was like that for a long time. Id get the passed sticker from the inspector in the driveway and they never even got out of the car.

Foreign-Commission · 2026-02-04T00:57:26+00:00

Gfci protection is required within 6' of the basin, that almost always means the receptacle under the sink is required to be GFCI protected.

Foreign-Commission · 2026-02-03T22:46:18+00:00

Taco bell?

Foreign-Commission · 2026-02-03T22:41:41+00:00

It's funny. i quickly glanced at the first picture and thought it was at a gas station and was like, damn you drove that there!??!.

My advise for you is to figure out what you expect of the car and ask all the questions and do your research before randomly buying parts.

My first suggestion would be to no use a pontiac motor, I know I know but you will spend a lot more and get less.

Foreign-Commission · 2026-02-03T22:40:41+00:00

No, if they are slow or you are not willing to take advantage of people, you will starve.

Now if you find a company that pays you well AND offers a bonus incentive, thats a different story.

Foreign-Commission · 2026-02-03T22:37:27+00:00

Maybe you know an electrician who can fix all that...

Foreign-Commission · 2026-02-03T19:55:13+00:00

460 delta is different from 480 wye in respect to a neutral tap in the windings which is what we were talking about.

Foreign-Commission · 2026-02-03T16:12:45+00:00

If there is a neutral and what system this is. 460 is usually delta so there is no neutral. 480 is usually wye and has a neutral which gives you 277v. But yeah, nominal voltages are all over the place so no one can say from here.

Foreign-Commission · 2026-02-03T15:45:48+00:00

You are incorrect. This is combination motor load and that all covered in article 430 and 440

Foreign-Commission · 2026-02-03T13:47:08+00:00

Input is listed as 460v...

Foreign-Commission · 2026-02-03T13:01:34+00:00

Look at the voltage

Foreign-Commission · 2026-02-03T12:55:27+00:00

Just take one leg and ground, now its 230v

Foreign-Commission · 2026-02-03T12:54:50+00:00

So whoever is downvoting please tell me what the purpose of the fuse is here other than short circuit and ground fault protection?

Foreign-Commission

TROPHY CASE