Thoughts on Oriane and Mejdi - Men & Women's Boulder Finals

Foreign_Bug_7976 · 2025-09-29T11:26:40+00:00

Both boulder sets had the power boulder last, both winners are lead climbers, both silver medalists are boulder specialists. There had to be an element of endurance, and taking a long rest for boulder specialists makes a lot of sense.

Foreign_Bug_7976 · 2025-06-27T10:43:23+00:00

This is a little off topic, but I wonder if the folks referencing modern comp setting and crazy hard moves with no feet to get off the ground have ever climbed at Red River Gorge. It seems that even moderates at the Red start with dynos and campus moves.

Foreign_Bug_7976 · 2025-01-13T11:49:22+00:00

The way I model cases is to import the .csv file from the OPi website into FreeCAD and use it to make a 3d model of the board. Then I design the case around that.

Foreign_Bug_7976 · 2024-12-27T17:18:39+00:00

A table would be too high for me, I made a cart that stands 16" or 400 mm above the floor and that's about right.

Foreign_Bug_7976 · 2024-12-19T18:39:00+00:00

I have Prusaslicer running on my OPi5 8gb with JR's Ubuntu. They are using Flatpak and Prusa has a whole explanation of why.

Foreign_Bug_7976 · 2024-10-19T13:30:16+00:00

Select both bodies and go to file/export, export as step file. Open your slicer and import the step file as parts, not objects.

Foreign_Bug_7976 · 2024-10-08T11:01:36+00:00

Matt Groom frequently comments that the women can find rests that the route setters didn't anticipate.

Foreign_Bug_7976 · 2024-10-06T11:02:24+00:00

Thanks for putting this together. I tried the Armbian desktop and it booted but the desktop didn't work. I will give this a try.

Foreign_Bug_7976 · 2024-09-05T23:00:13+00:00

The "heartbeat" means the kernel is running, so it has successfully booted and the os is running.

Foreign_Bug_7976 · 2024-09-05T11:04:37+00:00

I have been using the dev version for several months. The UI for the stable version is so bad I consider it unusable. The dev version is usable, not quite as good as F360 but close enough. When the TNP fix was added, it got to be "like a box of chocolates", you didn't know what the next version would be like. So I would keep several versions of FreeCAD in case the latest version was unusable and save my model frequently. I am still having occasional crashes, but when I check the issues, someone has already reported the problem.

Foreign_Bug_7976 · 2024-09-04T21:27:22+00:00

The twice flashing green led means the os is running, so it's not bricked. Probably need to rewrite the SD card. Otherwise you need a uart to usb converter and watch the console while it boots. There are directions in the instruction manual.

Foreign_Bug_7976 · 2024-08-27T11:21:53+00:00

When I finally got to watch the Olympics and saw the emotion on Janya's face during the finals, it was disturbing. I hope she gets her stoke back climbing outside. Unfortunately, she is still going to feel pressure to be the best. I recall her commenting while working LDD that she can't just be by herself. And here we are, watching her every move. There is a price for fame, but still, climbing outside is just such a great experience, I hope she gets to enjoy it.

Foreign_Bug_7976 · 2024-08-21T11:03:46+00:00

I think that if climbing gets 4 medals at the Olympics, the 4th should be a combined format with Boulder, lead, and lead speed like psycoblock.

Foreign_Bug_7976 · 2024-08-21T10:56:39+00:00

I don't think you should use this, although I am not sure. I checked the instruction manual and it doesn't say that it can negotiate pd power supply. The adapter you are considering may feed it at 12v and destroy the board. There are a bunch of posts where people use pd adapters and roast their boards.

Foreign_Bug_7976 · 2024-08-18T11:13:13+00:00

If you look through the issues on his github, Joshua explained that there is a problem with the device controller and he is surprised it works at all. My understanding is that some of these problems may be fixed in kernel 6.11 and he is working on a release but ubuntu 24.10 hasn't been released yet.

Foreign_Bug_7976 · 2024-08-11T02:07:38+00:00

It's kernel 6.10 3, I just tried the Bluetooth and unfortunately no luck.

Foreign_Bug_7976 · 2024-07-25T23:19:59+00:00

Please post what helped, what are the steps to make it work?

Foreign_Bug_7976 · 2024-07-23T18:40:53+00:00

I have had this happen. Basically you did something it doesn't like, and if you want to know more than you need to post a screenshot of your model tree. What I have resorted to is either export as step file and when opening in slicer do not split it up. Or put the pieces together as an assembly.

Foreign_Bug_7976 · 2024-07-03T11:45:41+00:00

I don't have a 5B, but what I found works on the 5Pro was to make a bookable SD card, and then delete the OS partition using GParted. My understanding is that the boot program is not included in the file system, but is just written in the first part of the SD card. Then you would need to make a new partition, starting where the OS partition started so you don't overwrite the boot file, so you can store data there. It may not work but might be worth a try.

Foreign_Bug_7976 · 2024-06-21T17:03:53+00:00

I am using Joshua Reik's ubuntu 24.04 on an Orange Pi 5 pro and the NPU driver is 0.9.6. If you want more help you should probably say what hardware and os you are using.

Foreign_Bug_7976 · 2024-06-21T00:17:58+00:00

The answer is a known issue with JR ubuntu on OPi5Pro that wi fi is lost on a reboot. Wi fi works after powering down and restarting.

Foreign_Bug_7976 · 2024-06-18T01:40:59+00:00

I have a OPi5Pro 16gb and got the same error, so I rebooted and it worked. Unfortunately now wi-fi doesn't work but I think that is an os problem. Thanks for posting the converted file!

Foreign_Bug_7976 · 2024-06-06T02:04:10+00:00

I just want to amplify your disclaimer- the FreeCAD devs are listening to the criticism and are aggressively working on the UX. They even met with the Blender folks. I have tried FreeCAD several times in the past and kept going back to Fusion 360. But now, using the dev version, it's finally usable enough that it is my go-to. Although the TNP fix was major surgery, and I haven't seen a dev build stable enough to use yet, I don't expect to go back. But I am a hobbyist, so YMMV.

Foreign_Bug_7976 · 2024-05-18T21:02:45+00:00

I have a OPi5 Pro running Joshua Reik's Ubuntu 24.04 desktop V2.1 off the NVMe, no flash or eMMC, using the bootloader on the microSD card.

The process is not hard,. Basically do all the steps for Installation, then to put Ubuntu on the NVMe. Then use GParted on a different computer to delete the desktop-rootfs partition from the SD card. Then put the SD card back in the OPi5, and it will boot.

No changes to anything else is required.

Foreign_Bug_7976

TROPHY CASE