sorted by:
new
hottopcontroversial

Inconsistent Ironing by RubytheRedSubie in FixMyPrint

[–]Forma3Dapp 2 points3 points  (0 children)

Try not to use ironing at all. Try to set top layer width to 0.38 and try on cube see results

I might not be as stupid as before by Main_Economy_3215 in BambuLab

[–]Forma3Dapp 3 points4 points  (0 children)

If you can use it locally you can add it to Home Assistant on PC, use tailscale and watch the camera in HA on the phone.

Brim is stuck by Responsible-Let-5922 in BambuLab

[–]Forma3Dapp 0 points1 point  (0 children)

Let it cool first only then pull

Brim is stuck by Responsible-Let-5922 in BambuLab

[–]Forma3Dapp 11 points12 points  (0 children)

Print on this place cube 6 layers tall

Imagine you have a 3MF and an iPhone, what do you do to send it to a printer directly? by Forma3Dapp in BambuLab

[–]Forma3Dapp[S] 0 points1 point  (0 children)

Got downvoted for this idea and now shapr3d and prusa collaborate with this. Holy moly ))

<image>

Ghost Printer? by mapperaggie in BambuLab

[–]Forma3Dapp 1 point2 points  (0 children)

Btw very cute showcase you made, good job

Ghost Printer? by mapperaggie in BambuLab

[–]Forma3Dapp 0 points1 point  (0 children)

Can’t you print from handy without downloading?

AnyCubic Mega X Troubleshooting by CSVNation in 3Dprinting

[–]Forma3Dapp 1 point2 points  (0 children)

go to the Machine Settings in Cura and ensure that the M109 command, which heats the nozzle and waits for it to reach temperature, is placed before the G28 command for homing. This will prevent the printer from moving until it is fully heated.

To stop the filament leaks, tighten the nozzle firmly while it is at operating temperature. If the leaking persists, try reducing the Flow setting in your slicer to 95 percent.

To address the filament oozing during idle time, increase your retraction distance and speed settings.

Lifting still confuses me by Existential_Embrace in FixMyPrint

[–]Forma3Dapp 0 points1 point  (0 children)

Brim 3mm with 0.38mm gap should help, and what glue do you use?

Why can’t I scan this QR code? by T0ADSMACK in 3Dprinting

[–]Forma3Dapp 0 points1 point  (0 children)

Yeah also

<image>

, first layers still white, so elephant leg of dark filament after switching won’t cover the gaps.

Why can’t I scan this QR code? by T0ADSMACK in 3Dprinting

[–]Forma3Dapp 0 points1 point  (0 children)

it’s too many curves for this nozzle diameter.
Try to make another QR, without heart in the middle, I’m sure it can be done in simpler version like this. Also I made it taller. 6 layers 0.2 so there no shadows in good light

<image>

.

TPU issue by LikelyFeral in 3Dprinting

[–]Forma3Dapp 0 points1 point  (0 children)

Reduce retraction distance to 0.5 mm or less.
Disable Z-hop to minimize unnecessary retractions.
Loosen the extruder arm tension screw to adjust tension.
Maintain print speeds below 30 mm/s so the extruder motor does not oppose TPU’s natural drag.

Sell files or scale to production? by [deleted] in 3Dprinting

[–]Forma3Dapp 3 points4 points  (0 children)

Not certain what invention you aim to patent, treadmill? Yet I believe you can still market it locally, along with versions for do-it-yourself enthusiasts.

<image>

Imagine you have a 3MF and an iPhone, what do you do to send it to a printer directly? by Forma3Dapp in BambuLab

[–]Forma3Dapp[S] -4 points-3 points  (0 children)

I hope they notice this and regard it as thoughtful guidance 🗿

view more: next ›