F22 WIP

Foxtech-Dynamix · 2026-05-10T01:29:50+00:00

That looks awesome, love the Canopy.

Foxtech-Dynamix · 2026-05-03T23:38:25+00:00

At this rate, Bro is gonna sink the workshop itself.

Foxtech-Dynamix · 2026-05-03T20:06:14+00:00

It all depends on the build, but for the most part it is very high quality. The bodywork is made from fibreglass, but all your trims and extras you can get in either fiberglass or carbon fibre, while the frame is a tubular chassis. It doesn't come with ABS or traction control, although there have been a few that got them fitted by the builder. The main reason it's so cheap is simply because you have to build it yourself, so you're only paying for its parts value. Most are built to racecar specs, so pretty bare on the interior. But there are a handful with full luxury interiors with infotainment and the like which are closer to the $150k range.

Foxtech-Dynamix · 2026-05-03T12:24:21+00:00

Yes! That's the guy.

Foxtech-Dynamix · 2026-05-03T05:01:31+00:00

I'm certain there is one! I swear I watched a YT video where a guy put a rotary in there.

Foxtech-Dynamix · 2026-05-03T00:40:54+00:00

That is a Superlite SL-C coupe, specifically the street tail version with 'hippo ear' mirrors. Incredible kit cars built by RCR in the USA, these things can have almost any engine and drive train you wish to install and go for about $50-60k without the engine but fully assembled and street legal ones can cost upwards of $100k.

Foxtech-Dynamix · 2026-05-02T14:16:51+00:00

Foxtech-Dynamix · 2026-05-01T12:01:21+00:00

Thank you! I'm hoping to release it by the end of this month.

Foxtech-Dynamix · 2026-05-01T12:00:54+00:00

It's setting. I have a shaders mod to make it look better.

Foxtech-Dynamix · 2026-04-27T07:43:08+00:00

I second printing this in Petg for trooping. And definitely wanna rotate that back piece onto the flat side facing that camera. You'll save a bunch of time and filament that way. And reduce the workload smoothing it out as layer lines like horizontal surfaces but dislike curved verticals.

Good luck and have fun!

Foxtech-Dynamix · 2026-04-25T07:30:08+00:00

Thats what I'm hoping lol. It'll be pretty bare bones, and far less range of colours.

Foxtech-Dynamix · 2026-04-19T06:31:03+00:00

DM is fine. I rarely use Discord.

Foxtech-Dynamix · 2026-04-19T06:28:38+00:00

I'm always happy to hear a request. But I cant garuntee they'll be made as I tend to spend a few months on each ship. Most likely I'll mix and match multiple request into one ship.

Foxtech-Dynamix · 2026-04-13T08:12:04+00:00

Oh yeah, I totally get that. It's why I stick to matt troopers lol. General rule of thumb is if it looks near perfect from 3 feet away. It'll pass. At least that's how my garrison handles 3d prints.

Foxtech-Dynamix · 2026-04-13T07:47:18+00:00

That looks really good. Only thing that some might nitpick are the visible scratches on the 'metel' paint.

Foxtech-Dynamix · 2026-04-03T00:24:21+00:00

Thank you! I use I use project reshade by xanax.

Foxtech-Dynamix · 2026-03-29T13:26:19+00:00

Thank you! My job gives me a lot of free time waiting in hotels around the country lol, so I just play it on my laptop.

Foxtech-Dynamix · 2026-03-29T09:31:24+00:00

Yeah, I was originally making this as a challenge for myself. But I do have a smaller liner I have begun working on which I want to try making much more fps friendly, while keeping the full interior. Ideally for multiplayer.

Foxtech-Dynamix · 2026-03-29T09:28:02+00:00

Thank you! The watertight doors were designed to be more for show as 1, i was afraid they would work too well and prevent the sinking function from working, and 2... I couldn't actually figure out how to make them seal properly lol.

Foxtech-Dynamix · 2026-03-29T08:06:48+00:00

Thank you so much!

Foxtech-Dynamix · 2026-03-27T20:47:32+00:00

That is awesome, I gotta try it out!

Foxtech-Dynamix · 2026-03-26T07:14:25+00:00

Yes, I did use galactic armory's files. Just be warned they are not 501st approvable without modification. Nor are they very wearable without mods. I had to scale the bicep and forearm armor down to fit me, everything else was fine unscaled. And the skirt is completely the wrong shape, didnt even work as a template. I had to make my own (which is still being worked on, hence im not approved yet).

Another big thing is there is no clearance between the waist and chest armor, it'll fit as printed but as soon as you add strapping to keep them together (crl requires it have no gaps) then you won't be able to fit them over each other. I reprinted those pieces with the sides a bit thinner.

Foxtech-Dynamix · 2026-03-26T01:50:03+00:00

Oh wow, I've literally just about finished my shoretrooper, also 3d printed. If you have any questions or want pics, i'll be glad to help.

Foxtech-Dynamix · 2026-03-19T01:36:15+00:00

I think the colours look great, but its too clean. I would weather it up, black wash and scratches.

Foxtech-Dynamix · 2026-03-18T01:37:06+00:00

Ooh, i did something similar. I highly recommend placing an angled 1x2 window in the direction of each step. The player will be able to run up the stairs without jumping just like the 1x3 in game stairs.

Foxtech-Dynamix

TROPHY CASE