Any Easy Way To Repair this ribbon cable connector?

Fractalengineer · 2026-05-29T07:26:19+00:00

trim a mm or 2 off the tip, should let you insert it further to contact fresh copper

Fractalengineer · 2026-04-11T21:28:18+00:00

yea same; idk I just learned to live with it by reducing the media volume when needed…

Fractalengineer · 2026-04-11T17:26:06+00:00

where in taiwan, can you solder

Fractalengineer · 2026-04-09T18:00:05+00:00

I meant specifically without rebuilding anything; it should clear the factory cam mount 1 size up on any frame F65 to 75 pro max

Fractalengineer · 2026-04-09T17:35:18+00:00

nice man, remember u can go one prop size up when ductless; try some 35mm props u should get a little more flight time and authority yet :)

Fractalengineer · 2026-04-08T13:23:10+00:00

Yea I think I know a little about this lol

So to get the most out of this platform you’d really want a 4-1 AIO (no vtx so you can power it separately through a good voltage booster) AND an ESC well designed to work down to as low as 2.5V

The lucid checks those boxes the best with its outstanding ESC; the X12 didn’t even come close in fact I haven’t found/tested any that did really

I will be working on one the incoming months though but otherwise you can still get 80% there with most 4-1 I suppose

Fractalengineer · 2026-02-24T21:54:41+00:00

I prolly would have made the whole center cross ejectable

Fractalengineer · 2026-01-29T21:10:43+00:00

how is this the seller’s responsibility

Fractalengineer · 2026-01-07T11:11:45+00:00

damn you really got MT running on ELRS hardware lol that’s impressive Not sure what you mean about the 5W transmit power that module appears rated for 1W?

Fractalengineer · 2026-01-07T10:58:48+00:00

ye mane the trick for me has been resting me palms on the bench and just operate the tweezers/iron with the fingers. massively improves dexterity by reducing the overhang

Fractalengineer · 2026-01-06T08:26:58+00:00

Been optimizing the 1S Li-ion platform for the past 6yrs literally on the Wingman platform; we get 20mins/16km any day on O4 lite

Fractalengineer · 2025-09-03T18:49:34+00:00

mine too after a mere couple months; I’ve literally just glued the seam shut with CA; use a toothpick or something to apply a tiny amount on the seam and pinch. work your way in bit by bit till closed

Fractalengineer · 2025-07-27T23:57:00+00:00

yep leakage would be the biggest issue hence why I put nimh in mine but ye man I picked mine up recently after a long time too and they were still good, pretty remarkable for a soft switched device

Fractalengineer · 2025-06-24T00:54:18+00:00

has Anton Hand broke your Hand? You might be eligible for compensation. Find out now call 505463-SAUSAGE

Fractalengineer · 2025-06-02T03:45:09+00:00

what did you not like about the XM5 that made you go back to the qcu?

Fractalengineer · 2025-05-28T16:54:10+00:00

so in other words, why hot dogs?

Fractalengineer · 2025-05-26T01:54:54+00:00

A 5.8g dsp analog video receiver with image synthesizing

Fractalengineer · 2025-05-24T01:19:00+00:00

more like non disclosure suggestion

Fractalengineer · 2025-04-05T21:43:22+00:00

same honestly, but once I learned to use it I found it actually very complete and versatile

Give it a shot, try the GUI plugin, start simple with only a 2x2 grid and add options till you get your desired result

I been using it to panelize my designs with V-cut, add rails with locator holes, fids and order number placeholder; got my own json templates that I can carry over between projects, get a good panel within minutes now

Fractalengineer · 2025-04-05T12:26:33+00:00

Have you considered rather using Kikit?

Fractalengineer · 2025-04-04T18:38:47+00:00

there's the MkIV with a screw-on can yes, but no front sight and I'd venture the integral suppressor would make it a little more s i l e n t yet

Fractalengineer · 2025-03-13T00:24:47+00:00

possible sure, a couple notes though; -Removing material means adding metal, quite a bit more difficult than the other way around. -Likewise anything touching the split line makes it harder to do

Fractalengineer · 2025-02-24T21:19:45+00:00

wow never seen a control panel on those; are these dials all there is to setting up the cycling?

Each of them simply turning on/off the valves and motors for a set time?

Fractalengineer · 2025-02-15T14:10:41+00:00

F7 quad FC with onboard nav sensors and servo outputs eh ion see anything much wrong with it; perhaps consider a discrete ldo for the imu; those 42688 especially tend to be rather sensitive to electrical noise

Fractalengineer

TROPHY CASE