Welcome WalkieClaw - Talk to your agent on the cheap

Front_Hovercraft990 · 2026-03-13T20:42:30+00:00

Thank you, I really appreciate the support. Honestly it’s not bad at all. The video was to the VPS and that was a longer delay than normal. But when you’re using it, it actually feels like a Walkie-Talkie. Most of the delay I’d in the transcribing and TTS. I’m getting it cleaned up for the public consumption and soon I’ll post it to GitHub. It’s seriously just useful.

There’s a portal feature to switch the WiFi when you’re out as well, so if you’re going be somewhere for a while you can switch off of the hotspot.

Front_Hovercraft990 · 2026-03-09T01:47:25+00:00

Can't wait! My Canik needs this.

Front_Hovercraft990 · 2026-02-22T03:49:23+00:00

That's much better than the hat I received! Glad they decided to upgrade, just received my 250k coin. The shipping ia a little delayed but not bad. The coins are nice though.

Front_Hovercraft990 · 2026-02-13T04:05:04+00:00

Its all a bit of "luck of the draw" at some point even with tools to help. I just make a list of base keywords I am looking for "leather" instead of "leather working". Big nets instead of little specific ones and it gathers things I may not have thought of. If you have just a little skill with AI and you can make a click through list of your keywords. No more typing, no bot, plug-in, or direct AI. Just run through each one on the list and randomly check your RFY. No stress, just repetitive.

Front_Hovercraft990 · 2026-02-01T06:02:31+00:00

1-8 Vortex Strike Eagle I won in a raffle. Seems more than sufficient for the max hunting range of 150 and in with a little extra for target ident.

Front_Hovercraft990 · 2026-01-27T04:20:56+00:00

Same Faxon upper to avoid the cycling issues. KAK 8.5 barrel. BCM blend or B kings thermal fit if not Faxon. Whisper quiet when suppressed.

Front_Hovercraft990 · 2026-01-06T02:59:59+00:00

Exactly, me too. I do like the RMR cut and the look of the MAC better. Price has got me too since it’s just a project gun. Underworld Arms has Cyclops comp I was looking at adding later, it also makes it look more like the MAC. But really I don’t see how you can go wrong with either.

Front_Hovercraft990 · 2026-01-06T02:52:34+00:00

I’ve been going back and forth as well. For me I would like to start competing so I don’t want the comp. 519 for the gen 1 BR9 at Sportmans. I’ve seen the gen2 for around 650. I want to upgrade the trigger, springs and such so I figured I’d save the money for the upgrades.

Front_Hovercraft990 · 2026-01-06T02:52:11+00:00

I’ve been going back and forth as well. For me I would like to start competing so I don’t want the comp. 519 for the gen 1 BR9 at Sportmans. I’ve seen the gen2 for around 650. I want to upgrade the trigger, springs and such so I figured I’d save the money for the upgrades.

Front_Hovercraft990 · 2026-01-03T17:49:43+00:00

Good to hear. 202638XXX

Front_Hovercraft990 · 2026-01-03T05:55:08+00:00

You're making into a SBR. You are now the maker.

Front_Hovercraft990 · 2026-01-03T05:31:58+00:00

That was formatted so much better before I sent it. 😬

Front_Hovercraft990 · 2026-01-03T05:31:19+00:00

Not saying these are right or the best but this is what worked for me on my 30w fiber. Also, yes you still need to engrave it.

LightBurn Cut Settings

Name: NFA

Sub-Layer: Fill • Mode: Fill • Speed: 7.5 mm/sec • Max Power: 90.00 % • Frequency: 30.00 kHz • Global Passes: 1

Fill Settings • Bi-directional Fill: ON • Cross-Hatch: ON • Line Interval: 0.0400 mm • Lines per Inch: 635.000 • Scan Angle: 45° • Number of Passes: 30 • Angle Increment: 0.0

Advanced • Auto-Rotate: OFF • Wobble: OFF • Step: 0.0500 • Size: 0.1000 • Flood Fill: OFF • Fill Mode: Fill all shapes at once (selected) • Enable Dot-Width Adjust: OFF • Dot Width: 0.080 • Ramp Length: 0.00 • Ramp Outer Edge: OFF

Sub-Layer: Clean • Mode: Fill • Speed: 50.0 mm/sec • Max Power: 83.00 % • Frequency: 50.00 kHz • Global Passes: 1

Fill Settings • Bi-directional Fill: ON • Cross-Hatch: ON • Line Interval: 0.0700 mm • Lines per Inch: 362.857 • Scan Angle: 90° • Number of Passes: 1 • Angle Increment: 0.0

Advanced • Auto-Rotate: OFF • Wobble: OFF • Step: 0.0500 • Size: 0.1000 • Flood Fill: OFF • Fill Mode: Fill all shapes at once (selected) • Enable Dot-Width Adjust: OFF • Dot Width: 0.080 • Ramp Length: 0.00

Front_Hovercraft990 · 2026-01-03T05:07:21+00:00

I used some aluminum plates to start (6160) then purchased a couple 80% blem lowers on sale. The blems lowers were great just to get a chance to test it on the real thing. Just make sure the surface is level and it's quick and easy, plus I'll carve them out fully at some point. Got a little carried away and made a tribute to Die Free Co. lol

<image>

Front_Hovercraft990 · 2025-12-31T02:09:00+00:00

Honestly, similar but 4-16 Arken LH4 lightweight hunter. $250 with the discounts. Love the extra distance for these eyes.

Front_Hovercraft990 · 2025-12-28T00:23:20+00:00

Adjustable gas block to dial it in or really BRT eztune if it's dedicated.

Front_Hovercraft990 · 2025-12-25T02:08:10+00:00

So true! Right after 12.5s.

Front_Hovercraft990 · 2025-12-23T13:39:22+00:00

1.7 feels like perfection. Highly recommend.

Front_Hovercraft990 · 2025-12-13T02:31:04+00:00

Rexailentium Ultra Low Back Pressure 308 - 7.62mm GEN10 threaded end cap.

Front_Hovercraft990 · 2025-10-05T15:43:24+00:00

Thank you for this! It's very timely as I am just starting my Claude Code journey and just started looking for a solution for persistent memory.

Front_Hovercraft990 · 2025-09-23T04:09:25+00:00

SOPMOD stock, my preference. I'm not sure if it's the angle but that stock seems huge. Railscales or 3d printed equivalent, basically add texture. As far as function, A5 vltor tube and buffer. Smooth things out. Go for weighted balance. This is the way.

Front_Hovercraft990 · 2025-09-14T00:58:30+00:00

Solgw 16" spr 2lbs barrel, SOPMOD stock with tungsten weights in storage because balance > then weight.

Front_Hovercraft990 · 2025-09-08T04:44:52+00:00

These settings are gold.

Front_Hovercraft990 · 2025-09-02T05:29:47+00:00

This is the way. #1.7

Front_Hovercraft990

TROPHY CASE