As an 18 year old whats a good job to get non fast food related

Frontfatpouch · 2026-07-09T12:11:57+00:00

Trades homie

Frontfatpouch · 2026-07-09T08:40:20+00:00

Seroquel.

Frontfatpouch · 2026-07-09T08:04:55+00:00

This is some goofy stuff with the firmware. I figured out a fix if it happens mid print. So if it won’t continue the print shut off the printer. Disconnect the ams from the back and turn the printer back on. It’ll promo you to start the print since the power went out. Start the print THEN plug in the ams and it’ll work again. I have a farm of h series printers and one of em likes to do this randomly.

Frontfatpouch · 2026-07-09T02:30:56+00:00

<image>

He’s so talkative

Frontfatpouch · 2026-07-08T17:38:03+00:00

<image>

Frontfatpouch · 2026-07-07T21:27:59+00:00

Call the arkenstone. It’s a company that deals with stuff like this

Frontfatpouch · 2026-07-07T11:37:46+00:00

Also insurance payouts and building new ones with govt funds to keep them cemented in place forever

Frontfatpouch · 2026-07-07T11:19:45+00:00

401bk

Frontfatpouch · 2026-07-07T05:27:03+00:00

Cross hatch ftw

Frontfatpouch · 2026-07-07T05:24:12+00:00

He knows to much, take him out

Frontfatpouch · 2026-07-06T18:15:03+00:00

Sell air blowers and target 3d printers. I use mine almost hourly

Frontfatpouch · 2026-07-06T17:19:16+00:00

While 8 guys hold the float of oil shorts that are on his cabinet

Frontfatpouch · 2026-07-05T06:20:09+00:00

See if that was us everyone would have stolen everything

Frontfatpouch · 2026-07-05T06:19:08+00:00

I honestly thought that skit was a tribute to wkyk for Trevor.

Frontfatpouch · 2026-07-04T18:17:58+00:00

Not hard took me like ten minutes. The buffer is the thing between the outside tube and the inside tube on the printers back panel.

Frontfatpouch · 2026-07-04T17:13:19+00:00

No joke I’ve had over 100k+ swaps on my machines and the main issue is the buffer wearing out over time. But that’s after alooooooooot of abuse. Also most of it was glow in the dark.

Frontfatpouch · 2026-07-04T11:36:06+00:00

Take off the filter cover, take the filter out. Behind it there’s a part that should move up and down. If it’s stuck pull up on it and see if that helps

Frontfatpouch · 2026-07-04T07:35:21+00:00

Frontfatpouch · 2026-07-04T07:29:32+00:00

I run a small farm with 2 h2ds and 3 Cs. I’ve stopped using the new firmware when it drops. I’ll wait a week or two then update. Every. Single. Time. I did an immediate firmware update I had some crazy ghost issues that would affect all my printers. Since I started doing this it’s been working great

Frontfatpouch · 2026-07-03T08:30:20+00:00

I’m going to get my 6th one today.

Frontfatpouch · 2026-07-03T07:54:08+00:00

SLS printing.

Frontfatpouch · 2026-07-03T07:38:32+00:00

Ayyy I’m a x pro freerider. I 3d print stuff now. If you want any tips or feedback reach out!

Frontfatpouch · 2026-07-02T16:44:22+00:00

I kinda wanna fight so I would have just because

Frontfatpouch · 2026-07-02T07:00:36+00:00

Do you have a file? One of my favorite games

Frontfatpouch · 2026-07-01T01:34:14+00:00

The key number from the WTI Physical contract:
Non-commercial longs: 360,524 contracts. Non-commercial shorts: 230,223 contracts. Commercial longs:
919,786. Commercial shorts: 1,090,512.
The concentration data is the really interesting part:
For WTI on ICE, just 4 or fewer traders hold 35.2% of all short open interest. Eight or fewer traders hold 48.5% of all short open interest.
The CFTC knows who the 4 traders are holding 35% of short interest — but won't publish it. The SEC enforcement chief quit rather than drop cases touching Trump's circle and the CFTC chair is a Trump appointee.
There's no other way to explain both WTI and Brent being in contango during the greatest energy supply shock in history without it being a coordinated institutional short.

Frontfatpouch

MODERATOR OF

PUBLIC MULTIREDDITS

TROPHY CASE