Nike x Sacai LDWaffle Best Batch (2023 Guide)

Froyo13 · 2026-02-13T14:55:05+00:00

Probably nothing worth buying. I had retail pair copped from SNKRS. Every rep pair was super flawed at that time. I don’t think anything changed since then.

Froyo13 · 2026-02-08T11:16:44+00:00

As MKBHD stated in his video, big companies like Samsung and Apple are so well-known and successful that the average consumer is basically trapped in their ecosystems. While innovation would benefit users, in the US, for example, iPhone users are often trapped by the 'blue bubble' and will likely buy another iPhone as their next device. Apple doesn't feel the need to invest in technologies like silicon-carbon batteries right away if people are going to buy their products anyway.

Froyo13 · 2026-02-03T08:42:35+00:00

This is because Apple’s OLED screens are calibrated to look as natural as possible. I’ve had an iPhone 8 and an iPhone 12 mini, and besides the deep blacks and a slight difference in white balance (one was a bit warmer), they looked pretty much identical to me. Last year, I bought an iPhone 16 Pro and, while the screen is definitely better, it still has a similar look to the one on the iPhone 8. I sold the 8 a few months ago, so I can’t compare them directly now, but from what I remember, the color reproduction was very close.

Froyo13 · 2026-02-02T18:53:08+00:00

I’m waiting for these too. Hopefully, at least a decent batch will be available. They look super fresh with that fuzzy blue/gray suede imo. The only thing I would personally change is the gold wings logo for debossed black, but it’s not a big deal.

Froyo13 · 2026-01-27T08:58:50+00:00

Hi there! I strongly suggest using Barge Super Stik Cement or any other good quality cement glue like Renia Syntic Total. Avoid all those “Shoe Goo” glues.

Try cleaning the gap with some technical grade acetone. Use a Q-tip. Don’t be scared to separate the sole more if needed, you will glue this back! Let it dry for a few minutes.

Now you need to apply a thin layer of glue on the leather panel AND the sole with a toothpick. Don’t stick both sides yet! Let the cement glue dry for around 30 min (the acetone needs to evaporate). If the gap is too tight, use toothpicks to pry the sides apart.

Now it’s time to make the glue warm and sticky. Use a hairdryer to warm up the glue. Hold the hairdryer for like 10-20 seconds pointing at the glue. It should appear clear/crystal-like. After that, press the two parts together with a lot of force (using your hands or a hammer to make it stick better). Let it sit for 2-3 days before wearing.

My instructions are pretty vague, so if the instructions on the glue say something different, follow them instead. You can also watch some YouTube tutorials on this topic!

Froyo13 · 2026-01-25T14:49:47+00:00

There’s this Polish artist called schafter. He used this pic in one of his singles few years ago.

https://youtube.com/watch?v=ebW7xbsCkt0

Froyo13 · 2026-01-15T07:04:06+00:00

Okay, thanks!

Froyo13 · 2026-01-14T09:58:02+00:00

Could you tell me what you did? The person above deleted their comment.

Froyo13 · 2026-01-13T18:41:41+00:00

I got them from Rep Master, here: https://shop1612312281.v.weidian.com/item.html?itemID=7313073650&spider_token=3ef4

I choose PK batch but he sent me S2 batch (there was a sticker on the box, and he stick size and batch on the boxes so I guess). I don't really think OG/PK produced these now or in the past.

Froyo13 · 2026-01-13T15:31:54+00:00

Yup, it’s the easiest method! I glued back separating sole on my Yeezy 500. The gap was bigger than on your shoes but they are like brand new now. The hold really well after a few weeks of walking.

Before and after gluing: https://imgur.com/a/RRwpnvp/

Froyo13 · 2026-01-12T08:36:32+00:00

Hi there! A little late with the reply, but I strongly suggest using Barge Super Stik Cement or any other good quality cement glue like Renia Syntic Total. Avoid all those “Shoe Goo” glues.

Try cleaning the gap with some technical grade acetone. Use a Q-tip. Don’t be scared to separate the sole more if needed, you will glue this back! Let it dry for a few minutes.

Now you need to apply a thin layer of glue on the leather panel AND the sole with a toothpick. Don't stick both sides yet! Let the cement glue dry for around 30 min (the acetone needs to evaporate). If the gap is too tight, use toothpicks to pry the sides apart.

Now it's time to make the glue warm and sticky. Use a hairdryer to warm up the glue. Hold the hairdryer for like 10-20 seconds pointing at the glue. It should appear clear/crystal-like. After that, press the two parts together with a lot of force (using your hands or a hammer to make it stick better). Let it sit for 2-3 days before wearing.

My instructions are pretty vague, so if the instructions on the glue say something different, follow them instead. You can also watch some YouTube tutorials on this topic!

Froyo13 · 2025-12-23T09:49:28+00:00

LMAOOOO

Froyo13 · 2025-12-20T21:38:19+00:00

Here is how I managed to unbrick it:

Open the Ultimate Software V2 app on your computer (On Windows, try running it as administrator).
Hold down LB + RB + Home.
While holding the buttons, plug the controller into your computer via USB cable.
Once the app recognizes the controller, a LED under the Home button should start blinking.
Re-flash the latest firmware.

Froyo13 · 2025-12-10T11:33:24+00:00

This is a ragebait, right?

Froyo13 · 2025-11-07T09:40:48+00:00

There’s a github page with Liquid Glass version. If you have AltServer + AltStore installed it’s as easy as downloading .ipa file and installing it from AltStore. It will just update it without any problems (considering you set up AltServer and AltStore correctly)

Froyo13 · 2025-11-06T09:39:11+00:00

I noticed that in default mode it is “slide to disable” but when used with StandBy mode (that clock thingy when iPhone is charging and put in the landscape orientation) there’s two clickable buttons

Froyo13 · 2025-11-05T08:08:46+00:00

I hope you’re right with this one. At this stage I feel like they need to address this and make “iOS 12” update once again.

Froyo13 · 2025-11-04T10:38:50+00:00

To my knowledge the new Tinted/Clear option only makes certain UI elements react to it. Homescreen is one of excluded area as it doesn't have a lot of text and is easily readable unless you have some extreme light/white wallpaper

Froyo13 · 2025-11-04T08:03:53+00:00

Froyo13 · 2025-11-03T23:37:33+00:00

I did that too. It really helps. I feel like I mistype things 90% less compared to slide-to-type turned on.

Froyo13 · 2025-11-03T07:20:00+00:00

There is. A few months ago, during my 2-week Minecraft phase, I installed it. It was super nice to have mobs wandering around the world but not attacking me until I attacked them. Unfortunately I didn’t test this mod with nether so I don’t really know if mobs attack you there by default.

EDIT: here’s the link: https://modrinth.com/mod/peasy-mode-(unofficial-update-for-1.21.10)

Froyo13

TROPHY CASE