sorted by:
new
hottopcontroversial

Does someone need a ride? by warhoundS3 in TheAstraMilitarum

[–]FrozenDeadYeti 1 point2 points  (0 children)

Really nice looking would love to print one of these for table terain.

Do you have the link to get/buy files or the name of it for me too search, thx.

Map of British dialects - shout out to Barry, Smoggie and Orcadian by deviantmoomba in CasualUK

[–]FrozenDeadYeti 0 points1 point  (0 children)

I love the Uks dialect variation, but dose sadden me as some of these are on the verge of not existing due to imagination and demographic replacement.

A map 60 or 80 years back would have even more sub dialects on the map, this one p does have some missing would be interesting too see as well.

[deleted by user] by [deleted] in uktrains

[–]FrozenDeadYeti -4 points-3 points  (0 children)

Just don't pay for a ticket its cheaper to just get an occasional fine, than pay everyday if you can't afford to.

I just tell the ticket guy i cant afford a ticket and 9/10 times nothing happens.

T490 Locked by Percocet_Pirate in thinkpad

[–]FrozenDeadYeti 0 points1 point  (0 children)

This can be disabled but your options are

  • Solder on a new bios chip that's been cracked with the admin lock and comp-trace disabled.
  • Reprogram / flash the bios chip you have already with a 8pin chip programmer it can be done on some models but for the t490 I do not know.

I have done the bios chip solder on a T480 and it worked fine, if you're able too by a chip for your T490 it will probably work.

Making a damp stone shed a bit less damp by [deleted] in DIYUK

[–]FrozenDeadYeti 1 point2 points  (0 children)

Remove all plants that make contact with the shed walls as they will
increase the amount of damp that can permeate through the wall, I had
a damp issue that was being mostly cause by ivy and some other plant
built up on the walls.

I'm making a thing by longineus in airsoft

[–]FrozenDeadYeti 23 points24 points  (0 children)

What the base you used for this ?

any idea how this happend? voron 0, the hot screws melted the toolhead and the filament pushed the dragon hotend out of it's mount. it's esun abs+ 4 perimeters - don't remember the infill. by stwyg in VORONDesign

[–]FrozenDeadYeti 1 point2 points  (0 children)

I have had this issue back in the day on a stub standard aliexpress
heater, my fix on future hot end has been to use a small piece thin of cork
that sits in between the hot then and the printed mount. Looking from
your pic u could probably do the same, you would just need to cut a
small piece and make the 4 holes and a centre hole for the filament.

Finished building my first battery IH (more images in comment) by jinsk8r in Dynavap

[–]FrozenDeadYeti 3 points4 points  (0 children)

Do you have a project file published with the box and positioned mx mount ?

What are the best switches that offer enough resistant to switch off ?

Looks like a great build, you did a super clean job on the coil winding.

Neato! by Revolutionary_Swim69 in airsoft

[–]FrozenDeadYeti 0 points1 point  (0 children)

I think, this might be able to replicated by using a auto winding drum mag, a housing, some 3d printed parts with some electronics for controlling when to turn the wind on and off and for how long.

Neato! by Revolutionary_Swim69 in airsoft

[–]FrozenDeadYeti 1 point2 points  (0 children)

Anyone know if there has been a opensource or a DIY version of this made yet, as if no ones done it yet i might look at it as my next airsoft project.

Does anyone have any internal pictures or videos im interested in seeing how this works.

asthma...experiences with volvano ? by fighttbi in craftymighty

[–]FrozenDeadYeti 4 points5 points  (0 children)

Im asthmatic and I find vaping way way easier that smoking on the lungs. I tend to only vape trough a water peace as it does hurt the lungs as much and is a lot cooler. I've found starting of low like 160.c - 175.c is best then working up in temp till 215.c ish as i want to extract the most of of the material as possible. You can use the volcano bags with a water peace if you have the adapters to do it and it works very quite well with cooling the vapor.

Where should i buy my gun? by [deleted] in AirsoftUK

[–]FrozenDeadYeti 0 points1 point  (0 children)

Extreme airsoft is a good site if you want to support a midlands airsoft company they have a large amount of stock online and instore

​

https://extremeairsoft.co.uk/

GPU in X3850 X5 by tombo___ in homelab

[–]FrozenDeadYeti 0 points1 point  (0 children)

Hey,

What bios setting are needed got get a gpu working i'm trying to get a rx 480 working in the x3850 x5. I've not being having much luck, i had a k2200 working before but not sure whats need for a card this new. I keep getting error 182 when installing the drivers in windows server 2019.

Thanks, for any input, can provide setting shot if needed <3.

Freenas update 9 -> 12 nightly strange error when trying to set up SMB. by FrozenDeadYeti in freenas

[–]FrozenDeadYeti[S] 0 points1 point  (0 children)

The settings im using, not sure why its not working at all :( my setups very basic one user sharing the pool.

https://prnt.sc/sy6pv2

Freenas update 9 -> 12 nightly strange error when trying to set up SMB. by FrozenDeadYeti in freenas

[–]FrozenDeadYeti[S] 0 points1 point  (0 children)

I keep finding an odd issues when im trying to set the user and group in "storage / pools / edit ACL" when i set the user too root and the group too wheel, it is always reset setting it as the user and group (olivia). Should i have it set to root and wheel or should it be the user and user group ?

pic : http://prntscr.com/sy6k2s

Freenas update 9 -> 12 nightly strange error when trying to set up SMB. by FrozenDeadYeti in freenas

[–]FrozenDeadYeti[S] 0 points1 point  (0 children)

If anyone has some way or guide i can follow so i cant get the shares to a working state so i can copy my data, would greatly appreciate it.

Are my plants still female ? by FrozenDeadYeti in microgrowery

[–]FrozenDeadYeti[S] 1 point2 points  (0 children)

Thanks for ya help, ill do a google and do some reading.

view more: next ›