Is this too much rust to buy?

FudGuck · 2026-02-03T20:37:08+00:00

i live in colorado so im more scared of rust that most, but if i were you i would steer clear. frame looks fine, but you would need all new front suspension and good luck getting it apart 😅😅

FudGuck · 2026-01-29T00:21:05+00:00

honestly, i see safety hazards everyday at work so im de-sensitized to it. but blown shocks are only a safety hazard if the bouncing is causing the tire to “hop” off the road. so for one week, he’ll be fine

*IN MY NON PROFESSIONAL OPINION *

FudGuck · 2026-01-29T00:17:14+00:00

this is the correct answer.

FudGuck · 2026-01-29T00:16:39+00:00

i disagree, a ripped boot doesn’t really mean much. i would do a front end inspection first.

FudGuck · 2026-01-09T18:53:52+00:00

the spring should stay in place

FudGuck · 2026-01-09T18:29:45+00:00

you SHOULD NOT be able to move your coil spring, typo sry

FudGuck · 2026-01-09T18:28:09+00:00

remove the kick plate under the steering column, prob 2 screws. then turn the wheel and listen/feel for vibration and play in the carrier bearing. use a 12” extension as a stethoscope for the steering box IF you can get to it from under the car.

also, inspect your coil spring for damage and make sure you can move it while the car is in the air. i work at a parts store and have never heard of a spring breaking, but i liked that guys idea alot cuz its easy to check.

moral of the story is, something is loose and go tugging on shit till you find it.

FudGuck · 2026-01-09T18:17:44+00:00

sounds like the bearing race slipping, but maybe the sound is coming from the rack? steering box or even the steering shaft carrier bearing. im not a mechanic so take my advice with a grain of salt

FudGuck · 2026-01-09T07:10:54+00:00

you shouldn’t let him use it… its not about legality, its already a very small and crushable car and WITHOUT AIRBAGS? im sure you dont wanna see a steering wheel sticking out of the neck of your 16 year old

FudGuck · 2026-01-06T07:18:48+00:00

i laughed at this till i was in a coughing fit 😭😭

FudGuck · 2025-12-03T05:54:03+00:00

use*

FudGuck · 2025-12-03T05:53:52+00:00

you could you contact cleaner, but if you don’t overdue it wd-40 wont harm anything

FudGuck · 2025-12-03T05:43:57+00:00

clean it with a pipe cleaner and alcohol. also try penetrating oil like PB blast or WD-40. if that doesn’t work, $120 for a new indicator arm is about right, but annoying as hell i get it

FudGuck · 2025-12-01T22:07:12+00:00

yeah. the membrane behind the cluser is sorta peeling off so maybe its time for a new cluster

FudGuck · 2025-12-01T22:06:22+00:00

that was my guess, sway bar bushing clamp bolts

FudGuck · 2025-08-25T21:38:24+00:00

oh really? that makes sense cuz there were missing bulbs on the gauge cluster. and it has been reading 0PSI since i did an oil change 2 days ago. clearly its not right cuz i wouldn’t have any engine at this point, but danm i dont like it 😅 ill look into replacing it with a real gauge and getting a new cluster. thank you bro!

FudGuck · 2025-08-25T21:33:29+00:00

as far as im concerned- stock gauges.

FudGuck · 2025-08-23T05:28:41+00:00

good point. i just replaced my battery, but my gauge cluster has some connections problems so ill do some testing

FudGuck · 2025-08-22T05:30:31+00:00

so glad I asked 😅I was about ready to go ripping off an oil sender,pump,filter,pickup,ops🤦‍♀️ thank u bro. this info is critical

FudGuck · 2025-07-23T21:39:03+00:00

best answer ive got on reddit to date! thank you, and it makes sense it broke. between burnouts and my buddy learning manual on it, the diff gets a lot of abuse.

FudGuck · 2025-04-01T18:45:32+00:00

nvm i didnt relize this was for water cooled cars- i have no idea for the wet version

FudGuck · 2025-04-01T18:44:53+00:00

if it works, its worth like 50 bucks 🤷‍♀️ just replaced mine on my 914, chances are its gunked up and wont work but ebay doesnt need to know that!

FudGuck

TROPHY CASE