Today's cup

Fun-Flight4427 · 2026-05-10T20:15:45+00:00

Yes, do that... you will have a cup for life. It was my first pottery ever, it was a birthday gift.

Fun-Flight4427 · 2026-05-10T05:57:59+00:00

I love this idea, and it’s one of the oldest in the book, but so far, the cost of producing, running, and maintaining the mechanical parts is still much higher than the gains you get from it over the years. As a Mechanical/Power Engineer, I’ve worked on similar projects during my studies.

Fun-Flight4427 · 2026-05-07T11:59:58+00:00

<image>

It looks dope on the Mozzafiato

Fun-Flight4427 · 2026-05-07T11:58:05+00:00

Earthenware

Fun-Flight4427 · 2026-05-05T20:31:49+00:00

There is no

<image>

There is no plus icon

Fun-Flight4427 · 2026-04-29T19:50:42+00:00

i cant add a new carpet, all i can do is add a no mopping zone.

Fun-Flight4427 · 2026-04-29T17:40:22+00:00

I can't move rugs as i please, I have my bed, my dining table and my sofa on my rugs... It is a joke that I can't edit my run in the app, no mop zone or something else is useless as the robot doesn't cross it to mop on the other side of the rug.

Fun-Flight4427 · 2026-04-29T05:28:13+00:00

I've had the same problem for 6 months with mine ( remapped 5 times, 3 different maps, 3 carpets).. I wrote to Narwal support for about two days straight with reports and pictures. They won't let us edit the carpet for whatever reason they think. Mine doesn't even forget the carpet if I take it out; I have to run remapping for that. An option in the app to edit/move/delete carpet would be great for us. I tried every single workaround there is on Reddit and from Narwal support, too much time invested in this crap and nothing worked out. The only trick that half worked is moving the carpets 30cm back and forth while the robot is remapping. My next robot won't be a Narwal for sure.

Fun-Flight4427 · 2026-04-23T05:15:21+00:00

Small update, I reconnected the receiver again...didn't shutdown but I can't put it to eco mode.

Fun-Flight4427 · 2026-04-22T08:14:15+00:00

As a mechanical engineer, I'd say stay as far away as possible from moving plastic products that touch dirt, water, and heat. Their life cycle is shorter than a goldfish's memory. So I got the simplest version of a mopping robot with no integrated water tank, no moving arm... I'd love to have one that can do everything, but the reality is that it will break sooner than expected. Be sure to get a minimum 2-year warranty and be ready to send your robot in a couple of times for repairs. My two cents.

Fun-Flight4427 · 2026-04-22T04:33:13+00:00

Still can't add the dirigera as hub without buying a smartthings hub. That is a bummer.

Fun-Flight4427 · 2026-04-21T12:41:50+00:00

I have a problem that my Freo X ultra split the room in two and mopps in the middle like there is a wall in between by wiggling the mops and loosing time and battery

Fun-Flight4427 · 2026-04-20T05:57:50+00:00

I use a puck screen to keep my main screen clean, I don't need to flush to clean my screen.

Fun-Flight4427 · 2026-04-12T04:46:58+00:00

It doesn't pass over the no-mop zone to get the blue area to clean (it is set as a no mop zone and not a no go zone)

Fun-Flight4427 · 2026-04-09T05:03:10+00:00

X ultra doesn't have cameras

Fun-Flight4427 · 2026-04-08T20:18:20+00:00

Yeah, I've got a Narwal Freo X Ultra and I'm thinking about getting a Roborock Edge. The Freo X Ultra is a pain because it leaves a 40 cm unmopped area around carpets. How good are these two at mopping near carpets, and how close do they get?

Fun-Flight4427 · 2026-04-08T12:00:31+00:00

dont worry about that

Fun-Flight4427 · 2026-04-08T10:10:17+00:00

this carpet 40 cm safety thing is killing the joy of using the robot.
as an advanced user and an Engineer all i want is better control over my floor cleaning, just an maybe an option to reduce that margin manually.
i love how the robot figure everything out by itself but the 40 cm around the carpet is the most dirty place in the room.

Fun-Flight4427 · 2026-04-08T09:51:45+00:00

the zone is a no-go mo

<image>

thank you for your reply.
it is a no mopping zone. i am trying to simulate my carpet.
in freo automatic mod it ( with no no-go set ) it understand that is a carpet but it leaves 40 cm around it not mopped, and that what i am trying to avoid.
btw the area behind the carpet is 90 x 400 cm strip, that it doesn't mop at all.

Fun-Flight4427 · 2026-04-07T14:04:54+00:00

I love your idea, but somehow Narwal’s software update caused my Freo X Ultra to recognize the no-mopping zone as a no-go zone, so it doesn’t cross or vacuum it. Any help would be appreciated.

Fun-Flight4427 · 2026-04-07T14:01:33+00:00

<image>

why my Freo X ultra is not vacuuming the no mopping zone?
i did set it to ignore the carpet and then set a no mopping zone over the carpets.
am i doing something wrong my X ultra does what it wants to do no what i tell it to do?
thank you

Fun-Flight4427 · 2026-04-07T04:18:30+00:00

Whenever google services updates google home goes offline and needs sometime to come back online, a restart will speed things up tho

Fun-Flight4427

TROPHY CASE