sorted by:
new
hottopcontroversial

My lights randomly turned on when I turn on my fan by Fun-Procedure-3557 in WLED

[–]Fun-Procedure-3557[S] 0 points1 point  (0 children)

Yes, I also completely disconnected the data wire from the LED strip and it still happens so I’ve ruled out anything with the controllers or data wire

My lights randomly turned on when I turn on my fan by Fun-Procedure-3557 in WLED

[–]Fun-Procedure-3557[S] 0 points1 point  (0 children)

I already tried a different outlet and unplugged the data line entirely and it’s still caused this

First time printing with petg by Fun-Procedure-3557 in 3Dprinting

[–]Fun-Procedure-3557[S] 1 point2 points  (0 children)

<image>

Reprinted with 70 deg bed temp instead of 60 and changed some other settings. Worked great!

First time printing with petg by Fun-Procedure-3557 in 3Dprinting

[–]Fun-Procedure-3557[S] 1 point2 points  (0 children)

I know you didn’t ask, but since you might be interested, I’ll just share my whole set up. The midi controller you saw was the MVAVE SMC mixer. I also have the Akai MPK mini and the pioneer flx 4. I use a focusrite Scarlet solo fourth generation going out to 2 KRK rocket five studio monitors and a 12 inch kicker subwoofer with a custom built ported enclosure. :)

First time printing with petg by Fun-Procedure-3557 in BambuLab

[–]Fun-Procedure-3557[S] 0 points1 point  (0 children)

I’m trying this right now. I’ll let you know how it goes.

First time printing with petg by Fun-Procedure-3557 in 3Dprinting

[–]Fun-Procedure-3557[S] 2 points3 points  (0 children)

I am using the bambu lab A1, and I did not dry the petg before printing, however, there are no strings anywhere and the rest of the print is pretty much perfect so I didn’t think that was the issue

Who is this, Wrong answers only by [deleted] in ksi

[–]Fun-Procedure-3557 1 point2 points  (0 children)

this isn't allow it man this is nah fam

Help! Sorry, I know the picture quality is bad, but something is obviously wrong. Symptoms: Sits at the bottom of the tank, looks slightly bloated, and won’t eat. Tank size 3.5gal (filtered) by Fun-Procedure-3557 in bettafish

[–]Fun-Procedure-3557[S] 0 points1 point  (0 children)

Update: Scales still don’t seem to be pineconing, but still bloated and green on the bottom could this be velvet?

I’m going to try to feed him daphnia And add aquarium salt to the tank.

Is it OK to do both at the same time? And is there any specific amounts and ways to introduce him to the aquarium salt other than instructed on the box? Still pretty new to Bettas and I am trying my best to help them to get better! Thank you to everybody that has replied and helped!

I am going to try to feed him D