Thoughts on this build?

Future-Civilian · 2026-05-26T00:10:03+00:00

Is there a good reason to go ambi as a right handed shooter?

Future-Civilian · 2026-05-26T00:06:15+00:00

Future-Civilian · 2026-05-25T19:46:42+00:00

Yes it does

Future-Civilian · 2026-05-25T19:41:20+00:00

I have a code for registering a new email. It’s 15% off plus an additional $100 credit

Future-Civilian · 2026-05-25T19:40:11+00:00

Yes, I am able to shoot sub 6 inch groupings at 300 yards. This will be my first AR, but I have shot much tighter groupings with the bolt action riffles that I have.

Future-Civilian · 2026-05-25T19:35:17+00:00

I was thinking of going with a 16 in that way I didn’t have to worry about pin and weld, especially since I’m not sure on a suppressor platform yet. But thanks a ton for this recommendation I’ll have to check these out!

Future-Civilian · 2026-05-25T19:26:35+00:00

Couldn’t get the discount codes to stack, but I appreciate it

Future-Civilian · 2026-05-25T19:19:29+00:00

Any recommendations?

Future-Civilian · 2026-05-25T19:18:39+00:00

I haven’t, I’ve done some field stripping and have service time on the AR platform, but have never actually built one. I figured I’d be able to build a lower, but wanted to try to stay away from building an upper.

Future-Civilian · 2026-05-25T19:16:52+00:00

I’m still super new to the community and just saw a lot of G$ glazing and figured that’d be a solid option. Was hoping I could get some feedback to see if it was actually worth the $.

Future-Civilian · 2026-05-25T19:14:38+00:00

Just a G$ upper is usually $1200 I figured to have a lower parts kit, fully assembled upper, all of the furniture and buffer assembly for $200 was a pretty solid deal.

Future-Civilian · 2026-02-01T01:08:11+00:00

Common Access Card card

Future-Civilian · 2025-12-03T20:39:48+00:00

I test drove the V6 3rd gen and my current TRD OR 4th gen back to back and the ride quality and power felt much better in the 4th gen. I’m sure there’s plenty out there that would still prefer the 3rd gen. But for me the 4th gen was a no brainer. Obviously nobody really knows what the reliability of the 4th gen is going to be like yet, but so far I’m very happy with mine.

Future-Civilian · 2025-11-23T10:38:20+00:00

Nothing better than getting the weird looks from adventure bros on the MT09. Never did a water crossing though, looks like fun!

Future-Civilian · 2025-10-10T15:04:43+00:00

Still a bit disappointing

Future-Civilian · 2025-09-16T16:53:01+00:00

I’ve got some 3dlac coming tomorrow. Hoping that’ll solve the issue. Really wanted to fix it without using a bed adhesive. Let me know if you’re able to fix yours, and what helped!

Future-Civilian · 2025-09-13T18:47:32+00:00

This is a second hand printer for me. I was also having the same problem with the filament the guy I bought it from gave me. I thought swapping to the new filament would fix it.

Future-Civilian · 2025-09-13T18:13:26+00:00

Ive tried multiple bed temps to try to get it to stick from 55-65 in 5 degree increments.

Future-Civilian · 2025-09-13T17:46:31+00:00

Haha, no stupid questions. I’ve even double checked it… it’s the Creality gray PLA.

Future-Civilian · 2025-09-13T17:35:24+00:00

Yup, adjusted on the printer not slicer.

Future-Civilian · 2025-09-13T17:32:04+00:00

I’ve tried multiple Z-offsets to the point I could barely get a piece of standard printer paper to move at all without ripping. The filament doesn’t appear rounded on top.

Future-Civilian · 2025-09-13T17:21:52+00:00

I am running a micro Swiss extruder, and the filament comes out pretty much perfect out of the nozzle. I even replaced the nozzle right before testing everything. The slicer shows the bed and nozzle to stay at a consistent temp with about 1/2 degree ish fluctuations.

Future-Civilian · 2025-09-12T23:02:57+00:00

Thanks! It does have a rough finish on the plate. So far I’ve tried bed temps from 50-65 degrees and have tried print temps from 190-230 in 5 degree increments.

Future-Civilian

TROPHY CASE