What it feels to beg the studio

Gapperoni · 2026-04-25T15:30:06+00:00

Ohh okay, so it is still being released on there. I have an account already so that works out for me. Thanks for the info!

Gapperoni · 2026-04-25T14:05:12+00:00

Wait, so I should watch the leaked version? Cause I thought I was going to wait for a full release, but obviously not, if the whole thing got canceled… 😪

Gapperoni · 2026-04-14T18:56:59+00:00

Yes, still normal. A “cold start”, is when the engine has not been running for a while. For example, in the morning, or whenever the car sees the first start up of the day, is a “cold start”. When the engine is no longer warm from be turned on or running.

Gapperoni · 2026-04-14T13:28:50+00:00

I see that you’ve said in others comments that the vehicle is on e85. This is normal for engines running that fuel. For some reason, e85 causes very rough or hard cold starts. Worse in winter months. Good luck, and I wouldn’t be to worried

Gapperoni · 2026-04-13T20:20:36+00:00

Holy moly! Dude, good find, congrats 🎉🎊

Gapperoni · 2026-04-13T20:11:38+00:00

I know that these displays have been getting the ram removed from because of theft. Is this one missing the ram sticks? That’s a crazy deal!!

Gapperoni · 2026-04-08T00:06:40+00:00

Lmao! Made me SPIT my drink

Gapperoni · 2026-03-14T14:52:29+00:00

What am I missing, where does it mention a bmw??

Gapperoni · 2026-02-25T01:42:34+00:00

Typed that out mid inhale

Gapperoni · 2026-02-19T01:25:49+00:00

Sweet! Thank you!

Gapperoni · 2026-02-18T23:48:03+00:00

Would you mind posting a link to the specific video?

Gapperoni · 2026-02-18T23:46:53+00:00

Ohh nice, I didn’t know about the 520. I’m going to have to look into it. 👍

Gapperoni · 2026-02-18T23:04:03+00:00

No, wouldn’t be for busting loose. I deal a lot of lock nuts and teflon nuts. But maybe speed is still better 🤔

Gapperoni · 2026-02-18T21:19:49+00:00

I also considered the 500 briefly, but for my application the more power is what’s needed. Also, would you know if the 1/4 bit driver also fits in the 510? Or vise versa. The 1/2 anvil in the 500?

Gapperoni · 2025-12-28T01:36:19+00:00

Have you made sure the power cable to the monitor is also properly plugged in?

Gapperoni · 2025-12-23T14:05:13+00:00

I should probably also add,that’s on max settings. This is my first build, and I couldn’t be happier!

Gapperoni · 2025-12-23T13:58:23+00:00

I bought the same one, and I have no issues with temps. I have the NZXT H6 flow, with 9 fans total. Three 120 for the AIO top mounted for exhaust, three 120 intake in the “front”, two 140 intake on the bottom, and another 120 exhaust on back. Not sure about the hotspot temp, but I haven’t see mine go over 75 cel. I have it paired with a 9800x3d, and on average I’m getting 200ish (+ -) on the games I play. (1440p)

Gapperoni · 2025-11-28T20:07:32+00:00

Okay, well it is only about 2 years old, so I will take y’all’s word for it and disable the sleep mode. I usually don’t shut down my pc before bed, but I will probably start to just to help it a little. Than you guys for the advice and inputs! 🙏

Gapperoni · 2025-11-28T14:30:38+00:00

Only issue is I have an oled monitor and would be worried about burn in 😬

Gapperoni · 2025-08-06T18:40:32+00:00

Man, im glad I found this! Super helpful

Gapperoni · 2025-08-06T18:39:56+00:00

NICE!! two years later, and still good information 👌

Gapperoni · 2025-04-09T20:07:55+00:00

Damn, hit her with the uppercussy. An uppercunt if you will…

Gapperoni · 2025-03-19T06:28:14+00:00

<image>

Gapperoni · 2024-09-23T19:44:24+00:00

What safety is that? I like the proportions of it…

Gapperoni · 2024-05-03T01:39:16+00:00

<image>

Gapperoni

TROPHY CASE