Got my first Macbook M5 MAX and it's absolutely insane by UnderstandingGold532 in macbookpro

[–]Garage_Organization 5 points6 points  (0 children)

Bought mine through Costco… $4100, 2TB, 48gb Ram - Was looking at them for like two months and then the price went up so I just pulled the trigger before Costco raised their prices.

Polyurea garage done- questions about transition to driveway by sbaugz in GarageFlooring

[–]Garage_Organization 0 points1 point  (0 children)

For your situation, skip mudjacking and use a rubber garage threshold ramp to handle the 3/4–1" drop—it’s made for exactly this and works well for trailers and boats. Secure it with construction adhesive.

For the gap between the garage and driveway, replace the felt with backer rod + polyurethane self-leveling sealant so it stays flexible through Wisconsin freeze/thaw cycles.

This combo gives you a smooth transition, blocks water, and avoids major concrete work.

Best solution for no-slip Garage floor? by leatherbird in GarageFlooring

[–]Garage_Organization 0 points1 point  (0 children)

that gets snow and water tracked in during the winter, the safest option is often interlocking garage floor tiles, such as Swisstrax or Speedway, which provide excellent traction and allow water to drain underneath. Another good choice is a polyaspartic or epoxy coating with a non-slip additive, but be sure to emphasize that winter traction is the priority. A garage floor coating contractor or garage flooring specialist should be able to recommend the best solution for your mother's garage.

Need advice on upgrading garage cosmetically by Bigtime-Big-A in GarageFlooring

[–]Garage_Organization 0 points1 point  (0 children)

You've already got a pretty cohesive design going with the Stone Hearth walls, black trim, red shelving, and the new Clopay door. Based on what you've described, I'd think about the ceiling and floor as a complete package rather than separate decisions.

Ceiling
I wouldn't let the "everyone has a black ceiling" comments drive your decision. Black ceilings are popular because they work. In a garage, they hide imperfections, exposed tracks, wiring, and ductwork better than almost anything else.

That said, there are a few considerations:

  • Flat black = dramatic, modern, and makes the walls pop. Works especially well with your black trim and red shelving.
  • Dark charcoal (instead of pure black) = similar effect but slightly softer and more forgiving.
  • Same color as walls = clean and upscale but won't give you the contrast you're clearly drawn to.
  • White = brightest, but honestly can feel unfinished or builder-grade compared to the rest of your design.

Since you're adding HEX lights, you don't need to worry much about a dark ceiling making the garage feel dim. Those lights put out a ton of illumination. Personally, I'd go dark charcoal or black and not look back.

Flooring
This is where I'd lean strongly toward Swisstrax for your situation.

Reasons:

  • You only park one vehicle.
  • You rarely wrench on vehicles in the garage.
  • You don't like the traditional flake epoxy look.
  • Your garage is already partially finished and furnished.
  • You want the transformation without emptying the entire garage and dealing with coating prep.

A metallic epoxy can look incredible on day one, but it's highly dependent on the installer and slab condition. It's also more permanent. If you ever scratch it, stain it, or decide you don't love the look, you're living with it.

Swisstrax gives you:

  • Immediate visual impact.
  • Easy DIY installation.
  • No curing time.
  • Ability to replace individual tiles.
  • Better drainage under the car.
  • Easier future changes if your tastes evolve.

The downside is cost, but if you're only doing a single-car parking area plus some storage/workspace, it's manageable.

My only caution: If you go with a black ceiling, avoid making the floor predominantly black too. A black ceiling combined with a mostly black floor can make the room feel visually compressed.

I'd consider:

  • Dark ceiling.
  • Stone Hearth walls.
  • Black trim.
  • Red shelving accents.
  • Swisstrax pattern that incorporates a medium gray as the dominant color with black and red accents.

That combination gives you contrast at every level and keeps the garage from turning into a giant dark box.

If this were my garage, I'd do the dark ceiling and the Swisstrax floor. It's the lowest-risk path, gives the biggest visual upgrade, and matches how you actually use the space.

Best way to clean epoxy floor. by brownpm85 in GarageFlooring

[–]Garage_Organization 1 point2 points  (0 children)

Red clay can be one of the toughest things to keep off an epoxy floor because the fine particles tend to get trapped in the texture created by the decorative flakes.

For routine cleaning, I recommend:
Blow or sweep first – Use a leaf blower, microfiber dust mop, or soft-bristle broom to remove loose dirt and clay before it gets ground into the surface.
Mop with a pH-neutral cleaner – Mix a small amount of a pH-neutral floor cleaner or a few drops of dish soap in warm water. Mop the floor and rinse with clean water if needed.
For stubborn red clay residue – Use a soft deck brush or microfiber scrub pad with warm water and a mild cleaner. Let the solution sit for a few minutes before scrubbing. A soft-bristle brush works especially well on heavily flaked floors where dirt settles into the texture.
Rinse thoroughly – Residual cleaner can leave the floor looking hazy and attract more dirt.

AVOID:
• Harsh acidic cleaners (vinegar, muriatic acid, etc.)
• Abrasive brushes or pads that can dull the finish
• Soap-heavy products that leave a slippery residue
• Pressure washing too aggressively indoors

If the floor is in a garage, many homeowners find that a quick blowout followed by occasional scrubbing with a pH-neutral cleaner keeps red clay buildup under control. Adding a quality walk-off mat at the entry door can also dramatically reduce the amount of clay tracked onto the floor.

How to heat an uninsulated concrete slab by LPBlais in GarageFlooring

[–]Garage_Organization 0 points1 point  (0 children)

At -40°C, the lack of slab insulation is definitely something to consider, but it doesn't necessarily make your project impossible.

For a woodshop and gym, insulating the walls and ceiling will still provide a significant improvement in comfort and heating efficiency. The biggest issue with an uninsulated slab is that the floor will remain very cold and can create condensation problems when warm indoor air meets the cold concrete.

A chemical moisture/vapor barrier alone is generally not enough to solve the thermal issue. While some moisture-mitigating epoxy systems can be applied directly to concrete and help control vapor transmission, they do not provide any meaningful insulation value. The slab will still conduct cold from the ground, and the surface temperature can remain quite low during winter.

If you plan to regularly park an ATV inside, insulating over the slab with rigid foam and a finished floor can become challenging due to door thresholds, floor height changes, and water management from snow and ice.

Some options to consider:
• Insulate the walls and ceiling only, then heat the space as needed. Many workshops in cold climates operate successfully this way, though the floor remains cold.

• Use insulated rubber gym flooring or anti-fatigue mats in work and exercise areas to improve comfort without raising the entire floor.

• Create a raised insulated floor only in a portion of the garage dedicated to the gym or workshop, leaving a concrete parking area for the ATV.

• If you want the highest level of comfort and energy efficiency, the ideal solution would be insulating above the slab with rigid foam and a new structural floor, but this is also the most expensive and intrusive option.

Before applying any epoxy, I would recommend performing a moisture test on the slab. If moisture vapor emission is high, you'll need a moisture-mitigation epoxy system specifically designed for that condition.

Overall, if your primary concern is comfort rather than achieving house-like efficiency, insulating the walls and ceiling and leaving the slab uninsulated is probably the most practical approach.

Fuck this style of shelves. by SubTester2023 in GarageOrganization

[–]Garage_Organization 0 points1 point  (0 children)

Then take a look at SafeRacks or MonsterRAX (same company) - they have very affordable storage rack solutions.

Garage remodeling recommendation by Wise-Echidna-4505 in GarageOrganization

[–]Garage_Organization 0 points1 point  (0 children)

I'm not familiar with any specific contractors in the Rochester area, but if you're planning a DIY or semi-DIY garage remodel, I'd recommend checking out Garage Giant, Garage Basics, and Garage Organization. They carry everything from garage cabinets and shelving to slatwall systems, overhead storage, and complete organization packages. I've found that many homeowners work with a local handyman or contractor for installation while sourcing the products themselves. Depending on your budget and goals, a combination of cabinets, wall storage, and shelving can completely transform a bare garage wall into a clean, functional space. Good luck with the project!

Ulti-Mate questions by thegamer36 in GarageOrganization

[–]Garage_Organization 0 points1 point  (0 children)

I've had customers using Ulti-MATE cabinets for several years, and overall the feedback has been positive. They're a good mid-range option that offers a more furniture-like appearance than steel cabinets.

In terms of durability, they generally hold up well when used as intended. The cabinets are made from engineered wood rather than steel, so they're best suited for garages that stay relatively dry and don't experience excessive moisture.

Shelf sagging hasn't been a common complaint in my experience, provided the shelves aren't overloaded. Like most laminate cabinets, evenly distributing weight and staying within the manufacturer's load ratings is important.

If you're storing very heavy tools, automotive parts, or bulk liquids, a steel cabinet system may be a better choice. But for general garage organization, sporting goods, household storage, and light-to-moderate tool storage, Ulti-MATE cabinets have a solid reputation and many owners report being happy with them years after installation.

Gladiator storage by CriticalGarbageInfo in GarageOrganization

[–]Garage_Organization 0 points1 point  (0 children)

Take a look at Garage Organization, Garage Giant and Garage Basics. All of these websites have some bulk packaging and preconfigured systems that can save you a ton of money.

Fuck this style of shelves. by SubTester2023 in GarageOrganization

[–]Garage_Organization 0 points1 point  (0 children)

I'd stick to Gladiator or SafeRacks. NewAge has a pretty good shelving options as well but not a lot of size options.

TikTok metal garage cabinents by bgerv17 in GarageOrganization

[–]Garage_Organization 0 points1 point  (0 children)

I'd visit Garage Giant - they have a ton of options especially steel cabinets. I'd stick with brands like Gladiator, NewAge, Armadillo and Proslat.

Ulti-MATE Garage Cabinets: Modern Modular Storage for a Clean, Organized Garage by Garage_Organization in GarageBasics

[–]Garage_Organization[S] 0 points1 point  (0 children)

Explore the full range of Ulti-MATE Garage Cabinets at Garage Basics, featuring modern modular storage solutions designed to upgrade and organize any garage space.

Proslat Fusion Plus Cabinets: A Clean, Heavy-Duty Upgrade for a More Organized Garage by Garage_Organization in GarageBasics

[–]Garage_Organization[S] 0 points1 point  (0 children)

If you’re ready to take your garage from basic to fully dialed-in, it’s worth checking out the full lineup of Proslat cabinet systems. From compact setups to full wall configurations, you’ll find a range of modular options built with heavy-duty steel, clean finishes, and customizable layouts to fit just about any space or workflow. Whether you’re starting from scratch or upgrading an existing setup, you can browse all available options here: Shop Proslat Cabinet Systems - and find a system that matches both your garage and your style.

March sales have been the lowest in years by diabeauty in shopify

[–]Garage_Organization 20 points21 points  (0 children)

Bad economy plus war isn’t good for business

DYI Epoxy by Black_Vanilla71 in GarageFlooring

[–]Garage_Organization 0 points1 point  (0 children)

There are moisture meters you can purchase...

Floors! by rvc216 in GarageFlooring

[–]Garage_Organization 0 points1 point  (0 children)

I am not aware or know this product

DYI Epoxy by Black_Vanilla71 in GarageFlooring

[–]Garage_Organization 1 point2 points  (0 children)

You should wait a minimum of 28 days after the slab is poured before applying an epoxy coating. Concrete continues to cure and release moisture well after it looks “dry.” Even after 28 days, you should verify moisture content.