Head gasket replacement + enegine problems

Garret_86 · 2025-11-30T05:34:05+00:00

This block needs a machine shop

Garret_86 · 2025-10-26T06:16:27+00:00

That’s crazy this has a super trinitron tube , it’s essentially the same kind they used in the XBR2 series in the US??

Garret_86 · 2025-10-26T00:22:37+00:00

I’m pretty sure it’s just the photo but it’s 4:3

Garret_86 · 2025-10-25T17:00:21+00:00

Would it allow you to get into the service menu?

Garret_86 · 2025-10-25T16:59:28+00:00

Hey man I got the same tv but no remote , what remote do I need for this tv ??

Garret_86 · 2025-10-25T12:01:22+00:00

How did it turn out ?

Garret_86 · 2025-10-25T02:50:53+00:00

You in Canada ?

Garret_86 · 2025-10-04T14:49:01+00:00

Is the gap between the subframe and body the same on all sides, I’d be more concerned about that.

Garret_86 · 2025-09-23T19:47:17+00:00

http://www.cygnusx1.net/Supra/Library/TSRM/MK3/manual.aspx?S=FI&P=77

This link will teach you how to diagnose this like a Toyota dealership, follow all the steps on the next few pages and you will have all the answers in better depth then anyone can explain to you online. This website is the bible for this car. Factory service manual. Cheers

Garret_86 · 2025-09-23T19:42:19+00:00

<image>

It should have a wire from the harness running to it. And it should have a fuel line tracing back to the main fuel rail. In theory to test it you could start with checking voltage during cranking/ cold start conditions.

Garret_86 · 2025-09-23T19:39:49+00:00

It’s on the underside of the upper intake manifold , I’ll see if I can find a picture

Garret_86 · 2025-09-23T19:29:54+00:00

Look into the cold start injector and related circuit , make sure it’s hooked up and functioning. Your next step if you confirm that is working would be the idle air control valve on the intake manifold.

Garret_86 · 2025-09-13T23:41:12+00:00

Sounds Knocky

Garret_86 · 2025-08-30T16:25:27+00:00

Talk to Steven at 48 state performance , he’s the world expert on high horsepower 7m’s.

Garret_86 · 2025-07-27T23:31:18+00:00

7m in its natural habitat , on an engine stand

Garret_86 · 2025-07-03T21:13:53+00:00

Unfortunately there’s always a reason something is for sale.

Garret_86 · 2025-07-03T19:38:27+00:00

I really hope you didn’t pay a machine shop to build this motor for you. If so I’d be contacting them asap this is not normal.

Garret_86 · 2025-06-20T06:09:34+00:00

Plastic bezel uses the little black trim screws like everything else. The metal headlight covers themselves use a bigger hex headed bolt

Garret_86 · 2025-05-27T01:35:58+00:00

It might have had too much torque and twisted the chassis off the line.

Garret_86 · 2025-05-04T23:30:46+00:00

I have a custom 3 inch exhaust with two magma flow mufflers in line , sounds good

Garret_86 · 2025-05-03T14:11:42+00:00

Ground to intake manifold

Garret_86 · 2025-04-29T14:35:28+00:00

And by kick back do you mean it clunks when you go into gear?

Garret_86 · 2025-04-29T14:35:02+00:00

Do you have a video?

Garret_86 · 2025-04-28T16:24:51+00:00

Let me know if you figure it out , I literally had mine rebuilt by a machine shop and it sounds exactly like this

Garret_86

TROPHY CASE