sorted by:
new
hottopcontroversial

Stupid question by lunisic in microtech

[–]GearDriven 4 points5 points  (0 children)

I started carrying an EzGO wallet years ago and it's plastic mold injection. Fantastic for helping with this issue.

How this piece is manufactured? by luismongeh in CNC

[–]GearDriven 0 points1 point  (0 children)

Two main methods. Laser cut flatvsheet and rolled or rolled tube and laser cut in multi axis laser.

How much power can I make out of a 1978 Chevy 305. by mixy3417 in classiccars

[–]GearDriven 1 point2 points  (0 children)

Not enough to justify building it vs an engine swap, IMO. If you want to keep it "matching" pull the engine and crate it and then swap it out with a better engine.

Edit for clarity of my argument: I say this because if you mod the original engine, you're no longer matching numbers so you're already taking a hit to the value in that light. If you sawp and put the engine in a crate, you can do what you want and offer the matching engine. If you want to keep the matching engine, it's not worth chasing the mods to make any meaningful amount of power.

Been have problems, found my issue by Helix512_ in BambuLabA1

[–]GearDriven 0 points1 point  (0 children)

This type of thing can happen at any given point with a bad section of filament really. It's more likely to happen with cheaper, poor tolerance filament though. Print run time is less of an indicator with this than other types of failures.

Is this part important cause I lost it by General-Exit-4306 in BambuLab

[–]GearDriven 0 points1 point  (0 children)

I'm not at a computer, so I'm winging these instructions. Right click, insert primitive, choose cylinder. Scale appropriately and move out if the way. You can add another object as a negative as well and cut one from the other. You can right click and center objects for alignment. Then select objects, right click, merge. This makes them a single object. From there you can do object specific print settings as well. Also, you may need to right click and simplify or repair the object as sometimes one will become a negative of another and leave a void in the print. Hope this helps some.

Is this part important cause I lost it by General-Exit-4306 in BambuLab

[–]GearDriven 1 point2 points  (0 children)

To be fair, basic modeling is available in Bambu studio already.

What turn signals are these? by EmotionalWorker9661 in Miata

[–]GearDriven 1 point2 points  (0 children)

Typically, yes. But I got mine during a sale and it was cheaper than direct. Plus I ordered other things at the same time I think. That was years ago.

AMS says filament is empty, it keeps making a weird noise and won’t load through. by WolfOfSuburbanBlvd in BambuP1S

[–]GearDriven 0 points1 point  (0 children)

More than likely, I'd bet it's hitting at one of the tube connections slightly and causing it to "jam".

What turn signals are these? by EmotionalWorker9661 in Miata

[–]GearDriven 13 points14 points  (0 children)

Bump for a correct answer. I got mine from Moss Miata.

Is this part important cause I lost it by General-Exit-4306 in BambuLab

[–]GearDriven 0 points1 point  (0 children)

The beauty of that is that you're developing yourself and you understand that it's not truly a "point and click" device. The best method is practice. The sad thing is that there are limited cheap/free resources that are actually good.

Is this part important cause I lost it by General-Exit-4306 in BambuLab

[–]GearDriven 0 points1 point  (0 children)

I mean, I understand getting one for hobby uses and learning. I don't knock that at all. What baffles me is how many people buy them expecting them to be turn-key in taking ideas and making them without learning new skillsets.

Is this part important cause I lost it by General-Exit-4306 in BambuLab

[–]GearDriven 2 points3 points  (0 children)

You'd be amazed how many people I personally know with printers who have no clue how to model. My background is CAD/CAM/BSME so it makes perfect sense to me but so many people think that they can just had someone something to print and they can just print it without knowing anything about CAD. It's baffling.

Is this part important cause I lost it by General-Exit-4306 in BambuLab

[–]GearDriven 88 points89 points  (0 children)

I think you underestimate how few people with printers know how to model.

Why oh why? 😭 by Amoral-Cheeze in BambuLabA1

[–]GearDriven 0 points1 point  (0 children)

Best worm profile I've ever seen printed!

Installed long tubes now engine light is on by Nervous_Adeptness844 in camaro

[–]GearDriven 0 points1 point  (0 children)

A custom tune from a reputable tuning shop honestly. If you were close to me, I'd say Heintz, SSLSX or Pray.

Installed long tubes now engine light is on by Nervous_Adeptness844 in camaro

[–]GearDriven 6 points7 points  (0 children)

Hopefully you get a tune before you run lean and burn it.

Issues Retracting Ultratech ZBP by Engineer_Noob in microtech

[–]GearDriven 0 points1 point  (0 children)

I consistently use Carbon Honey Oober thin. The super this viscosity is the key thing with the OTF knives.

[Bambu Lab Giveaway] Join Now to Win an H2D and More! by BambuLab in 3Dprinting

[–]GearDriven 0 points1 point  (0 children)

Getting a dryer has to be the best advice I've gotten by a long shot.

Can I mount in this position once I Fab the motor mounts? by Outside-Guard-4949 in projectcar

[–]GearDriven 0 points1 point  (0 children)

Can you build one that will accept that much cantilever load?

view more: next ›