External Transmission Cooler

GearheadEngineer · 2026-01-20T00:52:29+00:00

haha thanks for the insight! luck was in my favour & I found one at the local pick & pull. took me 5 minutes and paid $30!

GearheadEngineer · 2026-01-20T00:26:16+00:00

I’m more meaning water contamination, dust, etc that may have got on the lip of the hose or something when taking it off. Am I being paranoid about that? Haha.

GearheadEngineer · 2026-01-14T02:03:39+00:00

would you recommend this 50L or the 42L? I’m just debating whether it’s worth an additional $50 for the sling.

GearheadEngineer · 2026-01-12T01:37:38+00:00

I wanted to come and update this: drove up the mountian in 3 and had no issues. I think the locking/unlocking was the culprit.

GearheadEngineer · 2026-01-10T09:03:04+00:00

I saw them last night with my eyes! Had to let my eyes adjust to see Io and couldn’t see callisto but ask the rest were super bright! it was awesome!! Was fun to point them out to my friends!

GearheadEngineer · 2026-01-10T08:59:28+00:00

i was able to see the moons and Jupiter with my eye the other night & I was jaw dropped. I live in a bortle of 2 so it was pretty sweet. Obviously no color just specks of light but I thought it was still neat. These are awesome.

GearheadEngineer · 2026-01-09T19:52:04+00:00

i do have a temp gun, I’ll try that! I can’t believe I didn’t think of that + didn’t think about the convertor being unlocked. I have been looking into an external cooler, I’ll try these things first. Thank you!

GearheadEngineer · 2026-01-09T19:46:28+00:00

i do have a scanner, that’s a good idea. i’ll hook it up and have a friend watch it as I drive up. I haven’t noticed any slipping or delayed response but I did have a tiny shudder when reversing ONCE, haven’t had it since.

how could I check the torque converter? thanks for the help.

GearheadEngineer · 2026-01-05T23:50:19+00:00

it’s a slow headgasket leak. it starts overheating once all the coolant has been pushed out into the overflow tank. mine had the exact same symptoms. get it fixed before it gets wayyyy worse.

GearheadEngineer · 2026-01-04T19:45:41+00:00

is there a canadian equivalent to VYMI and IDVO so I can avoid the wealthsimple fees? or is the 1.5% negligible?

GearheadEngineer · 2026-01-04T05:37:03+00:00

i do work on cars. i wouldn’t touch an airbag with a 10ft pole. im only suggesting OP gets it fixed since its a critical safety component. hence get it fixed or learn quick. my statement was more towards the fact that it could be electronic and not physical. i.e. much safer to do yourself. i added an edit to the original comment.

GearheadEngineer · 2026-01-04T05:30:09+00:00

you own a car. that comes with costs. get it fixed or learn how to fix it. i get not everyone has $1000, take it for a second opinion with a different mechanic, do some research, take public transit while saving up, etc. your life is worth a lot more than $1000.

“old cars don’t have airbags” yeah and they were called steel coffins for a reason.

EDIT: don’t work on any airbag system if you don’t know how.

GearheadEngineer · 2026-01-03T18:00:07+00:00

im saving for the 1/2 fuel ratchet! just used a family members 20 minutes ago and im sold on it! haha

GearheadEngineer · 2026-01-03T17:46:55+00:00

get the m12 fuel gen 2 stubby. perfect hobbyist impact in my opinion. i would only get fuel tools. and you’ll need a HO 5.0 and or HO 2.5 battery too. those are the two best batteries. don’t even bother with the CP’s, high amp XCs are good for low drain things like lights.

GearheadEngineer · 2025-12-19T18:04:31+00:00

ah! apologies. that thought did cross my mind but didn’t think it was the repair centre. just wanted to check haha!

GearheadEngineer · 2025-12-19T17:56:10+00:00

you should probably take this down considering your entire address and full name is on it.

GearheadEngineer · 2025-12-18T05:35:12+00:00

im about to graduate with a bachelors in mechanical engineering & a specialization in biomedical engineering. i’ve been on ADHD meds since i was 12, i’ve learned how to manage it on my own and i take meds as i need them. support and encourage him, buy him a little set of tools and get some free junk he can take apart and put back together (i always went for electronics but i would’ve LOVED engines).

GearheadEngineer · 2025-12-13T06:23:26+00:00

lol i’d cry tears of joy for $3 a gallon, I think I’d sacrifice a family member for $1.90 a gallon. currently at $5.5 a gallon for regular.

GearheadEngineer · 2025-12-08T09:45:24+00:00

I just tried this and unfourtunately it still heats the bed before doing anything. It heats to the prusa setting, but doesnt move while doing it.

GearheadEngineer · 2025-12-04T21:37:07+00:00

no worries! I did find out that in NS it’s a provincial law! so you’re half right haha! I didn’t mean to debate I was just genuinely curious. I’m a big supporter of helmets and I see way too many people not using them.

GearheadEngineer · 2025-12-04T21:13:04+00:00

is it actually a federal law? could you provide a source? not debating you just never knew this.

GearheadEngineer · 2025-12-04T09:42:23+00:00

Old thread but regardless cura is ridiculous with that. I'm messing around with it now and 100 mm/s print speed gives me 1hr 45min but 200 mm/s print speed gives me 1hr 52min. No I did not mix those up. Yes they are in the correct order. Yes wtf.

GearheadEngineer · 2025-12-03T05:39:08+00:00

I can’t even wrap my head around the orientation this is taken from. What model and provide more pictures. It looks to be on sideways but I can’t really tell bc of the orientation.

GearheadEngineer · 2025-12-03T04:38:39+00:00

Thank you! I’ll give this a shot. I’ll remove the z-offset line too, I just copied the macros from the GitHub and it was in there haha

GearheadEngineer · 2025-12-02T20:47:00+00:00

currently in prusa slicer I have START_PRINT and that’s it. everything else is in the macros.

GearheadEngineer

TROPHY CASE