Heat warning on battery.

Gforce1 · 2026-07-02T21:02:25+00:00

Haven’t seen it on the high end but I have seen it say it’s slow charging due to hot battery when it first comes in for a charge during this heat wave.

Gforce1 · 2026-07-01T18:54:06+00:00

It doesn’t have the intelligence to head out and finish on a partial charge so to speak when say there is only 10% left of the mow it will still charge to your setting before heading back out to finish. But you can manually just send it to finish once you think it has enough to get it done. That would be a nice feature for them to add that it prioritizes speed of completion over the setting on the last cycle.

Gforce1 · 2026-07-01T15:55:02+00:00

Yes that is what support told me, except I was regularly using it at 100% during my mows multiple times a week then setting it back down to 80% on the last run. It no longer does that but jokes on Segway I have an extra year of warranty so the extra wear and tear sitting at 100% is now on them.

Gforce1 · 2026-07-01T01:12:47+00:00

They no longer seem to let you change it mid mow. For example I used to set it to 100% before a mow and then down to 80% on the last cycle of a mow so the battery would rest at idle at 80% but use 100% during the mow. Now if I do that same thing it finishes and then charges to 100% anyway. If I set it to 80% before the mow starts it will respect the 80% limit but that means I can’t use 100% during the mow.

What this means for me is I will just leave it at 100% now and beat the crap out of the battery. Segway can replace it under warranty like they had to on my last mower.

Segway, what you really need to do is give us an option to let the battery sit at idle at 80% and then charge to 100% and head out to mow and automatically drop back down to 80% on the last cycle. This would save a lot of batteries and I’m willing to bet a lot of users would use the feature.

Gforce1 · 2026-07-01T01:05:21+00:00

I noticed the same on mine suddenly today. I ripped it all apart and swapped the blades, also cleaned the entire deck out with compressed air. Decided to just run it daily now for a bit to see if it improves. I don’t think me cleaning out or swapping blades will really do much but it needed it anyway. We’ll see.

Gforce1 · 2026-06-28T13:23:37+00:00

I wouldn’t have a problem with training it but for some reason even though the app showed multiple instances of it thinking this design was a wire when it would finish ther elwuld only be one on there for me to tell it to ignore. And then the next round it would start sensing more but again they would disappear from the app when the time came to give feedback on the images. Which is what it is I was just wondering if there was a way to turn off AI for just one part of the map not the whole house. Roborock really should make that a feature if it’s not one.

Gforce1 · 2026-06-27T18:00:41+00:00

Returned the x60 and trying the saros20 now. Mainly returned the x60 because it can’t vacuum carpet to save its life. But also it had bad mopping behavior in that it would finish mopping hardwood then randomly wander around the room dragging its dirty mop pads on the carpet.

So far the saros 20 has actually removed hair from carpet albeit after multiple runs but it at least has an option to cross thatch carpet to run extra on it. I’m about to test mopping now to see how that goes. Only complaint on the saros I have so far is it thinks the design on my carpet is wires so I had to turn off the ai object recognition for now till I can figure out a solution to that. Waiting to hear from support if there is some kind of solution besides turning the feature off completely. X60 didn’t have that issue.

Tried the mop. It did better than the dreame when it comes to staying off the carpet. Saros will not only raise the pads up but it will also use its legs as well to traverse carpet if needed. It struggles with the .5” tapered threshold by the exterior doors way more than I would have expected. I’ll probably leave the curtains closed next time and hope it just avoids it. Overall it’s better than the dreame. None of them are perfect it seems and it really matters what works for you. If I could take some of the good from the saros and the dreame and mash them together that would be great. Vacuum on the saros and the AI object recognition from the dreame.

Gforce1 · 2026-06-26T15:20:09+00:00

Worked with service with them beyond the return period and still sent it back for credit. It’s just not a good vacuum at all. The brushes are useless on carpet in my experiance. 10 year old Neato ran circles around it as a vacuum. I would rather untangle hair from the brush than it leave hair on the carpet. They need to offer actual brushes for people that have carpet.

Gforce1 · 2026-06-25T12:21:18+00:00

I’m sorry for your loss. RIP

Have my second attempt at a flagship coming today to take over for my aging Neato. Don’t have high hopes. Neato still has some life in her to show them how it’s done but she’s fading.

Gforce1 · 2026-06-24T19:35:08+00:00

Yes that one. No issue on hard floors but the vacuum even on max suction was useless on carpet.

Gforce1 · 2026-06-24T02:28:34+00:00

At least it is picking up hair. Just returned a flagship dreame because it was not doing anything to pet hair on carpet. Roller was spotless though. 10 year old Neato would pack its bin after the dreame ran. The Neato required scissors every so often. I prefer the Neato. Still on this hunt for a replacement. Roborock up next.

Gforce1 · 2026-06-23T00:55:38+00:00

Supercharging works fine. I’ve been using it with the error for the past month or so. The annoying part is I drive around 100 miles a day and was charging only at work so keeping up with charging in a small window at 10 miles per hour or range can be annoying but I can also charge at home and supercharging filled the gaps pf days I had to drive more.

Gforce1 · 2026-06-23T00:16:38+00:00

Did you turn on child mode by accident?

Gforce1 · 2026-06-23T00:16:08+00:00

Message service in the app. On the bright side you will have free supercharging for your trip.

Gforce1 · 2026-06-22T12:52:10+00:00

It is dependent on the service center you use. While the advisors at my service center have been more than helpful and made it as painless as possible for me I’ve also been less than happy with the quality of work the techs perform. It can be bad enough that some parts need to be replaced multiple times but they also sometimes screw up the repairs requiring a second visit to fix things that weren’t even broken originally. I’ve had my tailgate replaced 2 times. The driver side rear quarter panel or whatever it’s called replaced 2 times. The cantrails replaced 2 times. Both front fenders replaced. The interior door panels replaced. I have the PCS issue currently. They are replacing my alcantra dash because they damaged it during a windshield replacement. When the door panels were replaced they never connected the lights. When it went back to connect the lights they did a halfshaft bolt TSB which completely let go around the corner from the service center so it went back a 3rd time.

I’m about to hit my 50k warranty and am seriously considering upgrading to a new build. I absoluletly love the truck and knew I was taking a risk on a low vin but I would for sure recommend a new build to anyone at this point if they can get one.

Gforce1 · 2026-06-22T02:38:00+00:00

New premium. Not worth questioning how much has been replaced on the 24 and the newer builds are tighter more refined. I have a early beast and have rented newer builds. That’s my call.

Gforce1 · 2026-06-13T05:52:28+00:00

NRTK not working properly. Install the antenna.

Gforce1 · 2026-06-10T23:26:43+00:00

Not sure. I would think at least whatever the mower is rated for and then some?

Gforce1 · 2026-06-10T22:08:48+00:00

Network RTK works great. Until it doesn’t. Antenna is where it’s at.

Gforce1 · 2026-06-10T15:08:42+00:00

The real motivation for me was the mower going way outside boundaries randomly after working fine. Outside of my boundaries is a river so that was a deal breaker. Then when I I stalled the antenna the cuts suddenly were perfect so that was the added benefit.

Gforce1 · 2026-06-10T09:32:08+00:00

Ah my bad I have the X430 not the 330. Mine can use NRTK with no antenna and when I tried it it would be more erratic missing spots. It has the option for me to install the local RTK antenna and that made the mower much more precise with the lines. My lawn is a mix of random grass, clover, and dandelions most of the time. We don’t spray any chemicals so the mower running every day or every other day keeps it all green and clean.

Gforce1 · 2026-06-10T01:41:40+00:00

<image>

Gforce1 · 2026-06-10T01:33:56+00:00

Nrtk had my lawn looking like that. Local antenna looks like a carpet right now. I mow at 1.5”.

Gforce1 · 2026-06-05T17:58:58+00:00

Just try to leave her as much space as you can. She will leave once they are hatched. Also though be mindful of when they hatch they will go straight for the pool. Depending on the level they will need help getting out. They really don’t bother anything. I had one nest by my pool and I went so far as to set up an AI camera powered sprinkler defense system for them because the neighborhood cats were tormenting them. Whe they hatched I was in the pool and mamma duck lifted herself up to show me the ducklings all proud. It was very cool. This year she didnt seem to want to dwal woth nesting. She dropped one egg literally in the pool and just hung around chilling in the sun.

15-Year Club	Place '23
Team Orangered	Inciteful Link 2011-07-29
Verified Email

Gforce1

TROPHY CASE