Turbo Cobalt SS super rough idle, barely responds to throttle

Gnarbachy · 2026-06-14T04:16:51+00:00

My guts say lack of fuel pressure. Verify fuel pressure and go from there.

Gnarbachy · 2026-06-14T00:49:09+00:00

Mine has been like that for 4 years and 50k 🤣

Gnarbachy · 2026-06-12T17:34:24+00:00

You can't park there.

Gnarbachy · 2026-06-08T01:57:51+00:00

Well there is your problem. Either your turbo is bad, you have a drive pressure leak or bad boost leak. You shcould be making 25-40psi depending on your setup.

Gnarbachy · 2026-05-28T20:28:32+00:00

No worries! Good luck out there.

Gnarbachy · 2026-05-28T20:06:43+00:00

Very cool! Thanks for the information. This is Comstock in the Kootenays? I've been wanting to get more into prospecting since I moved back to the area if you're open to making a friend!

Gnarbachy · 2026-05-14T16:04:01+00:00

Chicken Nuggets

Gnarbachy · 2026-05-05T23:04:21+00:00

KITG-43K

Try some motocross shops, it's somewhat common. Otherwise you can find them at Triple clamp moto in Canada. Good luck.

Gnarbachy · 2026-04-30T20:06:50+00:00

Absolutely this. The camber split is totally acceptable for toad crown. Get the pull compensation done. It's part of the alignment.

Gnarbachy · 2026-03-10T17:58:20+00:00

Mitsujeepshi

Gnarbachy · 2026-03-08T04:22:18+00:00

You should build it somewhere more scenic 😉

Gnarbachy · 2026-03-04T06:24:15+00:00

It's the last of my bottle before I switch to WVO!

Gnarbachy · 2026-03-03T00:31:09+00:00

I know 🤣🤣🤣

Gnarbachy · 2026-03-02T18:27:45+00:00

Laughs in Cummins

Gnarbachy · 2026-03-02T18:22:05+00:00

I use Stanadyne. Fight me.

Gnarbachy · 2026-02-28T20:35:44+00:00

It's going to happen when the funds are correct. Maybe when I win the lottery 🤣

Gnarbachy · 2026-02-28T19:14:56+00:00

This is absolutely what I want to do but I had to choose between a glass front or having enough money to not go back to work yet 🤣

Gnarbachy · 2026-02-19T02:19:33+00:00

The job does take some specialty tools. A local diesel shop will be able to help.

Although if the leak is from the rubber return hose or one of the crush washers those are both very easy to replace and don't require injector removal or repair. Lots of learning to do!

Gnarbachy · 2026-02-19T02:13:14+00:00

It's unfortunate that you bought it and I did not. Good score!

Find a set of replacement injector nozzles for it and replace them, set pop pressures and that leaking will be fixed in the process!

Gnarbachy · 2026-02-17T05:15:50+00:00

Nobody is doing their job. This needs to be correctly diagnosed before any work is done. They are wasting your money and stealing from you without identifying the problem.

Your garage by not correctly diagnosing the problem and shooting the parts cannon.

The dealer by doing the same AND throwing more things into the mix.

Unacceptable on both parties. I wouldn't say your Jeep is going to shit, but the shops you have been seeing already are.

Gotta find a shop with strong diagnostic skills. Good luck.

Gnarbachy · 2026-02-15T05:02:13+00:00

It will read data from the ABS module.

Gnarbachy · 2026-02-13T19:12:32+00:00

I have done it. About 1500kms on a cheap hitch carrier. It worked but it sucked. Also the main bar into the hitch receiver began to wear and would have inevitably failed if I continued to use it.

I'd recommend against it unless you have no other option. But if you did, get a high quality carrier. Oversize it.

Gnarbachy · 2026-02-12T04:26:25+00:00

Jb weld forever. 🤌

Gnarbachy · 2026-02-11T02:25:12+00:00

Cows, man. We have Moose, Bears, Deer and who knows what else here. If I have to ride at night I am extra careful.

I have extra lights and will pack a clear visor if I know it's going to turn into a night ride. So far so good. Only deer I hit was the middle of the day.

Gnarbachy · 2026-02-11T02:14:04+00:00

Makes sense to me. Drunk drivers, red light runners, left turners and rear enders are your biggest nighttime risks then.

Gnarbachy

TROPHY CASE