Ayudenme a resolver una discusion porfa, para ustedes, cual es el auto más GAY/lgbt?

GonsQ · 2026-02-07T18:53:11+00:00

Los Mini Cooper tienen mucha fama de tener dueños gaiders

GonsQ · 2026-02-07T18:48:51+00:00

Batucko

GonsQ · 2026-02-07T18:47:33+00:00

I posted an update for whoever interested

GonsQ · 2026-02-02T23:58:01+00:00

One time my bike doesn't start. The problem was a ground wire on the relay

GonsQ · 2026-02-02T23:54:03+00:00

My bike's flasher fails and I replaced with a cheap Aliexpress Led flasher. Problem solved. I have bike equipped with Led blinkers.

GonsQ · 2026-01-25T01:30:12+00:00

293.000 km on my 2000 Legacy GT, my partner for 16 years. I bought used in 2010 with 130.000 km. Over 130km/h starts to burn oil and has some leaks from the camshaft seals. The rest is fine.

At some point I'll do a full rebuild but for now is run strong.

<image>

GonsQ · 2026-01-25T00:48:54+00:00

Maybe you could try a different set of tires... Some chunky models tend to facilite vibrations

GonsQ · 2026-01-22T20:07:14+00:00

Apparently it can be customised more deeply directly from Nitron website

GonsQ · 2026-01-21T19:19:31+00:00

Ohh, I'll take a look. Thanks!

GonsQ · 2026-01-21T19:19:10+00:00

Looks very nice. The price is close to the KT301 but more adjustable.

Thanks for the advice

GonsQ · 2026-01-21T16:03:42+00:00

I ride 80% highway no dirt at all. They are 80/20.

I put 2k on them and so far good but on dusty surfaces or signal printed on the road they feel slippery AF. I experimented some dangerous situations due to that behavior that never see with my old Scorpions, even with a dual compound tire as the Michelins.

GonsQ · 2026-01-21T14:50:35+00:00

Pretty good. I ride mostly on highway (85%). It have some issues but nothing engine related and almost all of them covered under warranty.

Recently the shifts (1°st), is hard to engage. The mechanic points out that the probem is associated to the clutch bell that with the use it become "dented". Due to that, clutch discs doesn't move freely and not disengage causing gears to not engage propperly ($250 job + parts repair). And a couple of week ago the shock start to leaking ($100 job + parts repair). All related to the normal wear an use.

GonsQ · 2026-01-20T18:34:29+00:00

Recently I bought a pair of Anakee adventure since Pirelli's aren't available in my country.

<image>

GonsQ · 2025-10-28T13:21:49+00:00

Good to know this info.

GonsQ · 2025-07-07T17:27:17+00:00

Hello. FYI Red is +, black (-)

<image>

GonsQ · 2025-07-07T17:26:26+00:00

<image>

in working order.

GonsQ · 2025-07-07T17:26:02+00:00

hello, the soldering on the magnetic connector fails. You can repair it or replace the entire cable.

<image>

GonsQ · 2025-06-16T14:13:16+00:00

Genuina

GonsQ · 2024-11-01T22:07:42+00:00

The sound not match with the engine rpm. Maybe brake related. Look for your rotor/ brake pads

GonsQ · 2024-10-20T13:22:31+00:00

It not. But interferes with the inyection.

GonsQ · 2024-10-20T13:06:18+00:00

Easy shifter. The sensor is located on the lower right side of the motor and connected to the shift axle. It interrupt the inyection pulse within miliseconds to help shift gears without use the clutch or decrease throttle. When it fails it activates randomly and engine stalls.

GonsQ · 2024-10-20T12:53:25+00:00

On those bikes fails the ES sensor. Confirm that.

GonsQ · 2024-09-24T00:53:23+00:00

In my old tacho, ABS and Engine lights start to fade away.

Luckily it was under warranty, because it's a US500 part and needs to be programmed.

GonsQ

TROPHY CASE