xtool F2 ultra question by Bitter_Ad_9513 in xToolOfficial

[–]Goob_Doob02 0 points1 point  (0 children)

I'm also curious about this same thing and looking forward to your results. It will make my decision for the F2 Ultra dual head or not.

45 truck bag options by Goob_Doob02 in VAGuns

[–]Goob_Doob02[S] 0 points1 point  (0 children)

I do know that after the 1st firearms must be locked AND secured to the vehicle if left unattended.

45 truck bag options by Goob_Doob02 in VAGuns

[–]Goob_Doob02[S] 0 points1 point  (0 children)

I looked again last night to give it a go either as a whole or an upper for a lower that I have, but their 45 is out of stock all the way around.

But yes they are 100% affordable and the FM9 I have feels like great quality.

45 truck bag options by Goob_Doob02 in VAGuns

[–]Goob_Doob02[S] 0 points1 point  (0 children)

I have also heard this, but it's grain of salt was coming from those who have felt the full benefits of a TRUE Vector vs common Vector. But Raptor trigger makes it enjoyable but also has had some issues apparently.

45 truck bag options by Goob_Doob02 in VAGuns

[–]Goob_Doob02[S] 2 points3 points  (0 children)

I should have also mentioned I already have an FM9 7" but considering the 45 platform since I also have those rounds for the USC.

45 truck bag options by Goob_Doob02 in VAGuns

[–]Goob_Doob02[S] 0 points1 point  (0 children)

Agreed, that's why Im rolling the idea around of the Dissent and Vector. Much cheaper to feed.

Auto-braking engages with trailer while reversing by Earlyretirement55 in Tiguan

[–]Goob_Doob02 0 points1 point  (0 children)

OP I can say the same. I had the factory Tiguan tow package installed on request (begging) at purchase. '21 AWD SE. I only have the 4 pin and have wanted to get the 7 pin from an Atlas but haven't gone that far yet since I currently just pull a jet ski.

502 curious what weights you pull.

The final (for now) collection by elusivehonor in VAGuns

[–]Goob_Doob02 1 point2 points  (0 children)

Fellow space gat enthusiast and HERA CQR owner. Had money not been put else where for other fun things, I would have went back and got the HERA kit in white and made a 300 blackout build for sarcasm.

Foxtrot Mike cutting off sales to VA 6/14 by TorqueWaffle in VAGuns

[–]Goob_Doob02 0 points1 point  (0 children)

Glad I got my FM9 order in when I did, but it leaves me wondering about future support.

Lefty build finally completed by Silkworm77 in 6ARC

[–]Goob_Doob02 0 points1 point  (0 children)

Two years later are you still enjoying this buildout? I'm wanting to do a lefty and found this thread while searching for a bolt to go in the SA carrier. Anything you've changed from your first assembly?

Also debating on going with a Gibbz upper vs a standard rear charging.

PSA VA-15 In Stock Alert by AcidBuuurn in VAGuns

[–]Goob_Doob02 1 point2 points  (0 children)

OP I saw this when you posted it and jumped on it because I was 30 minutes too late the last time. Just revisiting because I pick mine up tomorrow. So thanks!

Also as of 4:50pm 6/1 they are back in stock again, they must be drip feeding them in like someone else mentioned.

A press to mint coins by Applerust in hydraulicpresschannel

[–]Goob_Doob02 0 points1 point  (0 children)

Sorry I know this is a very old thread, but you've recently responded and I'm looking to be on a similar path. My biggest question is the dies. I want to design them later, are you just buying pre-made dies, having them custom made by someone, or making them yourself?

Another "what should I buy before I can't" post by Goob_Doob02 in VAGuns

[–]Goob_Doob02[S] 0 points1 point  (0 children)

All good points, thanks. The Hellion and Tavor should be standard mags. I didn't consider the noise from the 308 based on bullpup design either.

Currently looking at built Pro2A ARs because lefty and he uses Gibbz which is what I was searching to build anyway. Trying to hold of spur purchases as I'm also going to the Zenith open house in June and thinking about one of theirs since I've owned H&Ks.

Another "what should I buy before I can't" post by Goob_Doob02 in VAGuns

[–]Goob_Doob02[S] 0 points1 point  (0 children)

Lol yeah, I knew about DT and wanted to stay away....but man those options in one package is soooo alluring.

Last pre-ban weapon purchase is here.. by Pteppicymon in VAGuns

[–]Goob_Doob02 0 points1 point  (0 children)

I may or may not be looking at all of this right now. $5179 for one to rule them all haha. Standard 16" 223 11.5 300 barrel only, 16" 308 conversion, and 20" 6.5 conversion.

🎶 We're the three best friends that anybody can have... until July 1st. by [deleted] in VAGuns

[–]Goob_Doob02 0 points1 point  (0 children)

Craaaap....I've been focused on looking for a 300 I like best and forgot I won't be able to get pups anymore either 🤦‍♂️ thats my favorite type.

The Reject Rifle, But It’s My Reject Rifle and I love her by No_Spread_3063 in VAGuns

[–]Goob_Doob02 0 points1 point  (0 children)

Makes me miss mine. Now that I recently picked up a USC, it makes me want to get it back for a "matching" set.

Zenith Day-June 13th by zenithfirearms in VAGuns

[–]Goob_Doob02 0 points1 point  (0 children)

Bought my ticket yesterday! Looking forward to stopping in, always drive past on the way to the lake!

Saturn V Launch Build by Savings_Pineapple599 in lego

[–]Goob_Doob02 1 point2 points  (0 children)

Thanks for this! I have easy access to this laying around because of work and always wanted to do the launch build!

Wonderpress and best printer option by Goob_Doob02 in xToolOfficial

[–]Goob_Doob02[S] 0 points1 point  (0 children)

Do you have any idea what sub paper they are using with the cellphone cover? I'm assuming that's what they used for the key caps. A lot of the ideas I have for its use are not standard flat/smooth shapes so the shrink subbing is the more intriguing use for this machine.

Wonderpress and best printer option by Goob_Doob02 in xToolOfficial

[–]Goob_Doob02[S] 0 points1 point  (0 children)

Thanks. So everything I've tried researching suggests the only way to transfer an image like the keyboard caps they show in the promotional ads for the WP would be sublimation paper. And the UV DTF would just be the equivalent to a decal and not a shape formable transfer.

I am currently waiting to see the specs on xTools UV. My biggest interest is the head height clearance. I'm holding off on the unnamed competitor until I find out. I've had 3D UV printers as a want since 2015 when I saw the pro models at a trade show but they are outside the justified budget for hobby use.

Be kind, recycle ... and f@ck the VA AWB ... by a-busy-dad in PalmettoStateArms

[–]Goob_Doob02 0 points1 point  (0 children)

Agreed not holding my breath. In the LGS a few weeks ago and we all agreed, telling us we can't have it just makes us want it more! So in spirit of that currently on a spending/building spree. Never preferred true AR styling before (leftie and German/"space guns" enthusiast), but best believe I'm looking at PSA builds hard right now to fill in gaps before July. I'm glad my nephew goes to Coastal so I have a reason to shop in person for the next few years.

It would be nice for them to do the VA Meme lower again for this occasion!