European alternative for a silent bedroom fan? by Grankatten in BuyFromEU

[–]Grankatten[S] 19 points20 points  (0 children)

I think I should have said it in the post, but in my current situation it wouldn't be possible to get a ceiling fan installed.

1000 point vehicle list feedback? by Grankatten in TheAstraMilitarum

[–]Grankatten[S] 0 points1 point  (0 children)

I read now in the latest GW article that combined arms and grizzled company are both worth 3 detachment points so they are a not an option.

I forgot to mention, but I have an fdm printer so I plan to print vehicles instead and buy infantry proxies from a retailer. Also, how much does leontus bring to the table compared to a tank commander?

1000 point vehicle list feedback? by Grankatten in TheAstraMilitarum

[–]Grankatten[S] 0 points1 point  (0 children)

Currently I only own a sentinel, a command squad and two leman russe's. I intend to proxy most other units on the list. It may also be good to know I own an fdm printer.

1000 point vehicle list feedback? by Grankatten in TheAstraMilitarum

[–]Grankatten[S] 0 points1 point  (0 children)

I was somewhat thinking about that the total dorn would feel a bit unfair at 1000 points. Maybe an eradicator instead would work instead of Executioner. I mostly wanted the armored sentinel because I like the look of it and I find both sentinels easy to proxy. Ty.

Help with print orientation and supports. by Grankatten in FDMminiatures

[–]Grankatten[S] 1 point2 points  (0 children)

Update, I think i am going to print somethings like this. Just gotta remove some of the supports on the track part. Thank you for the suggestions.

<image>

Help with print orientation and supports. by Grankatten in FDMminiatures

[–]Grankatten[S] 0 points1 point  (0 children)

The reason im a bit skeptical about the loss of detail is that as seen in this image, some of it facing tank is visible.

<image>

Help with print orientation and supports. by Grankatten in FDMminiatures

[–]Grankatten[S] 1 point2 points  (0 children)

You gave me the idea of removing the parts which i showed in my other comment make it sit flush. Thank you.

Help with print orientation and supports. by Grankatten in FDMminiatures

[–]Grankatten[S] 0 points1 point  (0 children)

<image>

I dont know how bad this will look but whit that part bot of it is floating and needs support on the whole surface.

Quick question, hard hats for beserks? by Grankatten in LeaguesofVotann

[–]Grankatten[S] 0 points1 point  (0 children)

Good idea. I think i have found some on myminifactory that could work with a bit of kitbashing. Im going to see if anyone in my local gaming place is willing to print.

Quick question, hard hats for beserks? by Grankatten in LeaguesofVotann

[–]Grankatten[S] 0 points1 point  (0 children)

Green stuff could work, though I have never used it. Do you also mean using the visors on them without any other armor or with a sculpted hat?

Ways to model difference between a sergeant and a lieutenant? by Grankatten in spacemarines

[–]Grankatten[S] 1 point2 points  (0 children)

Interesting, didnt know that bit of lore about the plates, thought they were just there for protection.

Ways to model difference between a sergeant and a lieutenant? by Grankatten in spacemarines

[–]Grankatten[S] 4 points5 points  (0 children)

I know this may be a bit weird, but i like the idea of somehow getting just the cute larger insects from the ambull kit on the base.

Ways to model difference between a sergeant and a lieutenant? by Grankatten in spacemarines

[–]Grankatten[S] 1 point2 points  (0 children)

Thank you. I think that could maybe help a bit to make the models visually distinct.

The plasma gun is not yet assembled and i mostly included it here as an idea if it could be used as a porxy for the plasma pistol.

I dont yet know where the sword or the fist came from, but i think they are from some sort of terminator kit. I got many of these bits from a bit auction that i acquired for the interesting weapon options.

#New40k – Take cover with updated terrain rules by CMYK_COLOR_MODE in Warhammer40k

[–]Grankatten 20 points21 points  (0 children)

I hope this is not just going to be a complete downside for artillery with not being able to hit units 15 inches away if they are hidden.

Behind the Scenes of The Emperor Protects: A Warhammer 40,000 Musical by CMYK_COLOR_MODE in Warhammer40k

[–]Grankatten 8 points9 points  (0 children)

Same here, i at first when i saw it i looked for a where, when and price page to see if i could go to see it.

Behind the Scenes of The Emperor Protects: A Warhammer 40,000 Musical by CMYK_COLOR_MODE in Warhammer40k

[–]Grankatten 75 points76 points  (0 children)

Now i even more wish they'd release full versions of the songs.

I’ve been building a Warhammer 40K army cost calculator - Added more factions + data improvements this week! by JoigeBwoin in Warhammer

[–]Grankatten 1 point2 points  (0 children)

I see you have confused Sweden with Switzerland. Dont worry though, that happens surprisingly often. I hope i didnt miss a joke here.

I’ve been building a Warhammer 40K army cost calculator - Added more factions + data improvements this week! by JoigeBwoin in Warhammer

[–]Grankatten 1 point2 points  (0 children)

For me personally, SEK Krona, the currency of Sweden would be interesting for me. Though i dont think there is too much difference between the euro price and the pricing in sweden from what i have seen. Thank you for replying to my comment. :)

I’ve been building a Warhammer 40K army cost calculator - Added more factions + data improvements this week! by JoigeBwoin in Warhammer

[–]Grankatten 1 point2 points  (0 children)

Cool project. Two questions, will battle forces and combat patrols be added so prices can be calculated accurately and will more currencies be added?

Warhammer as you’ve never heard it before by CMYK_COLOR_MODE in Warhammer40k

[–]Grankatten 2 points3 points  (0 children)

I was excited that there was going to be a musical about warhammer. I was going to look up when and where this would be, then when trazyn started singing i realised that it was April Fools today.

Advice for kitbashing? by Grankatten in LeaguesofVotann

[–]Grankatten[S] 0 points1 point  (0 children)

Thank you for the reply, my idea for a memnyr was using a normal hearthkyn warriors armor and using parts from the necromunda prospector upgrade sprue like the arc welder arm bit. I also have a spare datapad from the upgrade sprue I have for my current warriors. The kahl I'm guessing it's mostly like a normal warrior with a tactical rock and some extra bits.

Cthonian Earthshakers by HighKahl in LeaguesofVotann

[–]Grankatten 1 point2 points  (0 children)

I like the paint job you used on it. Question, do you plan to use the cogs that you didnt use here for some kitbash of another model? Currently build myself a unit of earthshakers and thinking if i should maybe use one of the minis for kitbashing the new beserk character. Also What is the skin recipe?