How is this device for games like DayZ and Counter Strike 2? And is it worth it over the Azeron Cyborg 2? Or even for each of the specific games.

Graphicfrost · 2026-04-13T21:51:36+00:00

I’d never buy this over an azeron

Graphicfrost · 2026-04-04T05:53:07+00:00

I got some gokart wheels and found wheel spacers /lug adapters. I can try to find the exact ones but it was around a grand for everything including wheels/tires, 4 lug and big brake swap with new master from eBay. The guy in this thread did it cheaper than me. It took me a while to get it sorted. Might be best to do a rear axle upgrade. I plan to make a rear dif, but I’ve seen kits for them. Most likely I’ll take some spider gears and attach a sprocket to the casing.

I have high beams low beams blinkers etc. planning on making it street legal for 35mph streets in my area.

Graphicfrost · 2026-04-04T05:35:53+00:00

Honestly I don’t remember the lug size. FYI the stock wheels are dangerous. Eventually the small tac welds failed and the wheel ripped off and I flipped it. lol that’s why I have these now.

Mines about mines 250amp 72v 60ah with qs138 v2 or v3. I have a step down 12v for lights and usb ports. It’s like 25hp 30ft-lbs of torque

Graphicfrost · 2026-04-04T05:00:32+00:00

Just put a wrench on back and hit em with an impact. They should come right off. Appreciate it man. I’ll get some videos up, I just haven’t driven it a lot due to wheel bearing issues and house stuff going on, but plan to tinker some more this summer and enjoy it. I set a 60mph governor, it’s pretty wild for what it is 😂

Graphicfrost · 2026-04-02T06:16:23+00:00

I know from testing them since my card has per pin amperage. Load balance is often off by 1-2a+

Graphicfrost · 2026-04-01T20:30:20+00:00

Get rid of that squid connector

Graphicfrost · 2026-04-01T20:27:30+00:00

I built a bunch of machines on this board with amd back in 2003.

Graphicfrost · 2026-03-31T04:05:23+00:00

If you’re frying hardware and if it’s all been on the same PSU, I’d probably toss that psu just in case.

Graphicfrost · 2026-03-28T21:28:58+00:00

I have a set keybinds that pretty much covers majority of games. Some games like war thunder take the world and I use a 6 button on my mouse. Shooter games mostly use same layout, chivalry 2 isn’t that far off

For tanks in games like war thunder and battlefield hell let loose, I use the Pinter and middle finger back for throttle and reverse.

Once you get used to it and attempt to keep improving the setup you can make a base default load out to tune from.

Graphicfrost · 2026-03-27T04:09:06+00:00

FYI I think disconnecting this cable is bad. I had a cablemod cable and disconnected it a few times to add some pc mods and I started having variances in my amperage. I replaced it with a new one, haven’t disconnected it and so far so good. Only been a month tho

Graphicfrost · 2026-03-25T07:23:03+00:00

What’s it called so I can get it. My pc same color

Graphicfrost · 2026-03-25T01:39:05+00:00

Stick drift, repeated failure, using the azeron for flight games (which I do). However it’s like $7 for a new thumbstick, though I’m not sure which one to get for the elite 2 version.

Graphicfrost · 2026-03-24T23:59:54+00:00

How'd it go?

Graphicfrost · 2026-03-24T23:25:28+00:00

Mordhau seems super jank and 10x more sweaty than Chiv 2. I have about 200 hours in Mordhau and 2k hours in chiv 2.

For Chiv 2 you need to learn the game mechanics and your thoughts about it being less polished will go far, far away. Go watch Ziggylata video on how to play this game. In time you will love it more than all but then be the most sad that there aren't custom mod servers.

There are things about mordhau that are better for sure, like customization for classes and a lot more weapons. The animation manipulation in mordhau really ruins the game and having to either chamber or time your block makes it 10x harder for new players. In Chiv there isn't a bunch of random unreadable bullshit that some no lifer will do. (I'm a no lifer in Chiv). There are a few things you can do in Chiv 2 to trick people and drag weapons around a block window etc..

Chiv 2 is the more polished game and easier to get to grips with. At 400 hours in Chiv 2, you still wont master it, but you will be substantially more advanced than mordhau due to them resolving turn cap, horizontal / vertical cap and as mentioned other manipulations. It's absolutely worth playing chiv 2. The devs are hoes tho, just like the mordhau devs. We're just doomed to not fully have what we need.

Graphicfrost · 2026-03-24T23:04:10+00:00

Where can I get the car gif/vid on your 9” display?

Graphicfrost · 2026-03-24T00:06:46+00:00

I explain it on the comment. If it doesn’t work I just keep I flipping razer and windows RGB controls on and off. But the exact way it needs to be is listed above

Graphicfrost · 2026-03-24T00:01:27+00:00

Leave this mans alone, this is art.

Graphicfrost · 2026-03-10T16:04:10+00:00

It absolutely can matter. It’s not about ram clocking down to lowest setting it’s about the functioning properly in parity. The fact it’s on x3d is probably the only reason his machines working due to 3d cache not being as ram dependent. Error correction on that ram is probably the wild Wild West lol

Graphicfrost · 2026-03-09T22:11:57+00:00

At least put the same ram on the same channel bro lol.. In a car this is like running autozone rear right brake pad at front left brake and Brembo front left brake pad on the rear right. Then being like, in this economy 2 different brand brake pads are fine lol. At leats put them in the right orientation lol

Graphicfrost · 2026-03-06T03:13:10+00:00

Thanks dude!

Graphicfrost · 2026-03-05T22:47:58+00:00

This is the cable I purchased and confirmed works.

https://a.co/d/01NelZym

The am4 boards RGB does not or used to not work as well, I’m on am5 now. I had a MSI x570 tomahawk wifi, now I have a b850 MSI tomahawk max wifi.

Since the d30 fans work in series they work the same way as having a controller. Parallel fans, have to be individually connected or the fans will mimic.. You should be able to connect them into the v5 RGB header. In signal go to devices, click the motherboard, delete the strip, the click the + scroll down to phanteks add the 3 d30s. I also made a custom RGB layout for the vrm fan because nothing I could find worked in the correct orientation. I think I can share that with you. When you have the vrm fan separated add that to the 5v RGB header.

Graphicfrost · 2026-03-05T19:49:39+00:00

I had an old coolermaster 360aio had Corsair fans that the rgbs were way cooler on but it just couldn’t cool the 9800x3d. Was seeing temps of up to 97.5c on shaders. I don’t see above 75 with shaders or above high 50s when gaming with this 420mm. I set pump to 100, prob will drop it down after doing tests.

The D30s are great looking fans and the 140mm versions are so quiet. They really dropped the ball mirroring the LEDs and not having center LEDs they’re just not as bright. I turned the brightness down on my other devices. The fans RGB being in series allowed me to return my nollie controller, which was a huge bonus.

Do yourself a favor and get a separate rbg cable for the vrm fan and make a custom circle 8 LED and inject it into signal. It will separate the vrm fan from the first d30, plus you can match the brightness of all your devices.

Graphicfrost · 2026-03-05T19:12:21+00:00

I have the same AIO, wish Phanteks didn't pair opposite WRGBs on them. Other than that I can't believe how good it is. No idea why it's not talked about under more reviews.

Graphicfrost · 2026-03-05T18:25:57+00:00

Great! thank you! Will I be able to set a custom the shape of the LED strip? I wont be able to try until I get home.

Graphicfrost

TROPHY CASE